|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-03-2017, 05:14 PM
|
#1 |
|
Senior Member
  
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,385
|
Lower shift linkage for 402/400TH
These came off a 71. My 72 has the same. By chance anyone know where to get more of the retainer washers for the shift lever spring? The hole in these retainers are oblong. Classic Industries sells a replacement shift lever with one of these retainers, or similar. The original used two.
Haven't put things together, but I believe the bushing replacement per this image should work. Thank you. Edit: Just threw one of those bushings on my 72, works fine. The shaft is a pinch longer than original, so I shaved it off. Didn't do anything to the flange side. If anything, seems to be a better fit.
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 Last edited by 71CHEVYSHORTBED402; 09-03-2017 at 06:20 PM. |
|
|
|
09-03-2017, 05:18 PM
|
#2 |
|
Moderator
 
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,210
|
Re: Lower shift linkage for 402/400TH
Take the sample to Lowes or Home Depot hardware section...
they are either 5/16 or 3/8 plain steel washers... 
|
|
|
|
|
09-03-2017, 06:41 PM
|
#3 | |
|
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,385
|
Re: Lower shift linkage for 402/400TH
Quote:
 , They're oblong and come right up.
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
|
|
|
|
|
09-03-2017, 07:54 PM
|
#4 |
|
Account Suspended
 Join Date: Jul 2016
Location: Tacoma, WA
Posts: 6,873
|
Re: Lower shift linkage for 402/400TH
OC truck shop lists those parts...not sure how well they fit
|
|
|
|
|
09-03-2017, 08:11 PM
|
#5 |
|
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,210
|
Re: Lower shift linkage for 402/400TH
They dont need the rectangular holes...round ones will work fine...
I havent used the rectangular ones for years....
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
