|
10-21-2017, 06:43 PM
|
#1 |
|
Registered User
Join Date: Sep 2016
Location: Hardin Ky
Posts: 4
|
Wolf's head SYN ATF
Im going to service the trans in my 87 , 700R4. I have a case of Wolf Head SYN fluid. Im sure it has conventional DEX III in it now. Will there be any problems adding the SYN to the conventional that is in the torque converter and what else that wont drain? Thanks in advance
|
|
|
|
10-22-2017, 10:25 AM
|
#2 |
|
Registered User
 Join Date: Jan 2002
Location: norwalk,iowa,usa
Posts: 920
|
Re: Wolf's head SYN ATF
i wouldnt do it !!!!
|
|
|
|
|
10-23-2017, 10:36 AM
|
#3 |
|
Registered User
Join Date: Jul 2017
Location: OKC, OK
Posts: 247
|
Re: Wolf's head SYN ATF
If you drain the pan and then wait a day or two, the converter will probably drain back into the pan. Provided you have some other way to get around for that time...
|
|
|
|
|
10-23-2017, 07:03 PM
|
#4 | ||
|
driving is in my blood
Join Date: Dec 1999
Location: Mesa AZ
Posts: 5,748
|
Re: Wolf's head SYN ATF
Quote:
Quote:
OP- Just like with engine oil, you can mix conventional and synthetic to your hearts content. You can switch back and forth, you can do 90% reg with 10% synthetic or the other way around, whatever. It doesn't matter.
__________________
-78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me. |
||
|
|
|
|
10-23-2017, 07:54 PM
|
#5 |
|
Registered User
Join Date: Oct 2009
Location: .
Posts: 2,187
|
Re: Wolf's head SYN ATF
That wolfs head syn atf is good stuff. I buy it by the drum. I wouldn't hesitate to use it.
|
|
|
|
|
10-24-2017, 08:10 PM
|
#6 |
|
Registered User
Join Date: Jan 2002
Location: norwalk,iowa,usa
Posts: 920
|
Re: Wolf's head SYN ATF
ive seen it on high mileage cars & trucks -tranny works good -owner thinks it should be changed ? all the old dextron stuff dont get out ! the synthetic wont mix with the old dextron & work right ??? plus the tranny is worn a little ? & synthetic is very slippery -good stuff but it has its place i would just drain the pan & change filter -possibly drain the converter ? & refill with the stock dextron stuff ! if you had a truck that had synthetic in it -no problem - its your truck -do what you want to do !
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
