IL WTB Neutral Safety Switch Terminal End Manual Trans

[IllinoisK30]

I’m looking for the terminal end for my neutral safety switch on my ‘77 Chevy. The PO just butt connected the wires to by-pass the faulty switch.
The wires going to it are purple and purple with a white tracer. I had another harness saved from a’78 with four speed but somebody did the same thing! I couldn’t believe it, so I need the terminal end that the two purple wires go into or that terminal end with the wires in it so I can just solder it on to the existing wires.
I’m not sure if anybody can help but I sure would appreciate any. Please see the pictures for reference Thanks.

[IllinoisK30]

This is a picture of the plug I’m looking for.

[1774btcrew]

I have one $22 shipped. Most of the time these are bypassed just like yours.

[wahl4m]

if you cant find one ??? ck napa -i believe they have a universal one that might work ? so many things are being discontinued these days ?? good luck -im doing one that was bypassed but everything is still there !

[IllinoisK30]

Originally Posted by wahl4m

if you cant find one ??? ck napa -i believe they have a universal one that might work ? so many things are being discontinued these days ?? good luck -im doing one that was bypassed but everything is still there !

Thanks, I appreciate it. I will check. Your lucky, nobody wants to fix things right these days!

[bluex]

Do you have a part number for the switch you have pictured? I need something to put on my 78 that I have converted to a manual trans.

[IllinoisK30]

Originally Posted by 1774btcrew

I have one $22 shipped. Most of the time these are bypassed just like yours.

PM sent.

[IllinoisK30]

Originally Posted by bluex

Do you have a part number for the switch you have pictured? I need something to put on my 78 that I have converted to a manual trans.

Part number for switch is 336248.

[IllinoisK30]

Originally Posted by bluex

Do you have a part number for the switch you have pictured? I need something to put on my 78 that I have converted to a manual trans.

I forgot to mention the part numbers for the bolt and nut. The bolt is pretty special and will need to get. There pretty cheap on ebay. The nut probably a big box store will have. Both are plastic.

Bolt-336250
Nut-336296

[bluex]

Thanks for the info man!

[IllinoisK30]

Originally Posted by bluex

Thanks for the info man!

You bet!

[bluex]

So for anyone else who might be looking looks like the 336248 was replaced with 14013141 which was replaced with 14074333. All are discontinued.

Other options:

Standard motor products NS12 -discontinued
AC Delco D2211A -discontinued.

I did go ahead an get the bolt off eBay though. There are some switches out there but man they are pricey imo. You can get an 85+ one for like $11 but most of these are $40 or more. Guess I'll have to bite the bullet on one eventually.

[1774btcrew]

Shipped out today

[bluex]

If anyone finds this later I got a switch an installed it today. The pigtail off the neutral safety switch from the column fit this switch perfectly. The wires were even long enough to reach it without modifying them.