MN Gates, roofs, doors, fenders. MN>TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 12-08-2017, 09:19 PM

Will be heading from MN to northern Texas in Feb and Figured I would offer up some bigger parts for sale that I can haul with me. You will need to be close to my route or willing to meet close to it. (or local pickup in northern MN) No shipping otherwise.

Pb57 has first choice on gates and dieselwrencher has second choice as they have both asked about one.
Everything else is up for grabs. Prices are reasonable and would be OK with a few bucks for gas depending on how far out of my way I go.

$125 - Blue gate with protector. Surface rust, no holes I see. Very slight bow.
$350 - pair of 1972 door shells. Drivers side has a few pin holes, but has been blasted so you see what is there. Very straight on the outside.
$125 -fully blasted gate with a few pin holes and slight bow.
$400 -blue gate. pretty decent and straight. Has a few screw holes from a tailgate band.
$80 - green gate with dents on top otherwise clean.
$150 - roof with cargo light. Nice shape.
$250 - maroon gate. Slight bow, pretty decent.
$120 - red fender, pretty decent.
$80/each - blue 68 fender, gold 69-72 fender. Both will need a little work.

**too much stuff** · 12-08-2017, 09:28 PM

Also have a cab in another thread and a set of 15x8" 6 lug wheels. Will probably add more to this thread...

**too much stuff** · 12-08-2017, 09:32 PM

More...

**too much stuff** · 12-08-2017, 09:34 PM

Last...

718jwh · 12-09-2017, 12:12 AM

Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago.

Thanks
John

**too much stuff** · 12-09-2017, 10:58 AM

Quote:

Originally Posted by 718jwh

Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago.

Thanks
John

Probably down I35 to des moines. Unsure after that, south and west from there.

718jwh · 12-09-2017, 11:17 AM

We could probably work out a meeting place, I will PM you

**too much stuff** · 12-10-2017, 01:05 PM

Quote:

Originally Posted by 718jwh

We could probably work out a meeting place, I will PM you

Doors pending to john. More pics coming soon.

**too much stuff** · 12-10-2017, 07:15 PM

pics...

**too much stuff** · 12-10-2017, 07:18 PM

More

**too much stuff** · 12-12-2017, 02:35 PM

Few more pics for john

**too much stuff** · 12-17-2017, 12:35 AM

Quote:

Originally Posted by too much stuff

Doors pending to john.

Bump for the other parts.

garciajulian · 12-19-2017, 10:24 PM

I'll take the blue one $400 if the others don't want them I live in nothern Texas and can meet you just let me know when your comming thru thanks.

**too much stuff** · 12-20-2017, 09:44 PM

Quote:

Originally Posted by garciajulian

I'll take the blue one $400 if the others don't want them I live in nothern Texas and can meet you just let me know when your comming thru thanks.

More pics for you.

70 C/K 20 · 12-21-2017, 11:24 PM

Is the grille for sale?

**too much stuff** · 12-22-2017, 11:13 PM

Quote:

Originally Posted by garciajulian

I'll take the blue one $400 if the others don't want them I live in nothern Texas and can meet you just let me know when your comming thru thanks.

Back of gate looks pretty good with a few dings here and there. Overall a pretty decent used gate. Will try to add a couple more pics for you.

Quote:

Originally Posted by 70 C/K 20

Is the grille for sale?

Sure, it is driver shape. $100. Will try to add pics soon

garciajulian · 12-22-2017, 11:29 PM

OK sure would like to see them

70 C/K 20 · 12-22-2017, 11:46 PM

Ok thanks. I live just south of Dallas. Could meet up when you get down here if it's in better shape than the one I've got.

In The Ten Ring · 12-23-2017, 03:21 AM

ugh....thought about "getting in line" for those 1972 doors but I looked at a map, looks to be at least a 3 day one-way trip for me.

In The Ten Ring · 12-23-2017, 10:42 AM

On second thought, I reverse my decision....I'll get in line for those doors if the first fellow decides against those. *If you can allow me to come get those in March when I have the time off from work.

**too much stuff** · 12-23-2017, 07:16 PM

Back of gate and grill pics.

In the ten ring, I will have you in line for doors if anything falls through.

**too much stuff** · 12-23-2017, 07:21 PM

Grill... That is ice and pine needles frozen around the headlight on the pass side. It will clean up ok, but will still be driver condition.

70 C/K 20 · 12-23-2017, 07:47 PM

Quote:

Originally Posted by too much stuff

Grill... That is ice and pine needles frozen around the headlight on the pass side. It will clean up ok, but will still be driver condition.

Ok thanks. Shoot me a message when you make it down and I'll link up with you for the grille.

70 C/K 20 · 12-23-2017, 07:53 PM

If you have a decent tailgate left by the time you get here I may take that too. Don't happen to have a chrome front or rear bumper do you?

In The Ten Ring · 12-24-2017, 12:52 AM

Quote:

Originally Posted by too much stuff

Back of gate and grill pics.

In the ten ring, I will have you in line for doors if anything falls through.

Thanks man.

12-08-2017, 09:19 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Gates, roofs, doors, fenders. MN>TX Will be heading from MN to northern Texas in Feb and Figured I would offer up some bigger parts for sale that I can haul with me. You will need to be close to my route or willing to meet close to it. (or local pickup in northern MN) No shipping otherwise. Pb57 has first choice on gates and dieselwrencher has second choice as they have both asked about one. Everything else is up for grabs. Prices are reasonable and would be OK with a few bucks for gas depending on how far out of my way I go. $125 - Blue gate with protector. Surface rust, no holes I see. Very slight bow. $350 - pair of 1972 door shells. Drivers side has a few pin holes, but has been blasted so you see what is there. Very straight on the outside. $125 -fully blasted gate with a few pin holes and slight bow. $400 -blue gate. pretty decent and straight. Has a few screw holes from a tailgate band. $80 - green gate with dents on top otherwise clean. $150 - roof with cargo light. Nice shape. $250 - maroon gate. Slight bow, pretty decent. $120 - red fender, pretty decent. $80/each - blue 68 fender, gold 69-72 fender. Both will need a little work. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-08-2017, 09:28 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX Also have a cab in another thread and a set of 15x8" 6 lug wheels. Will probably add more to this thread... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-08-2017, 09:32 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX More... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-08-2017, 09:34 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX Last... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-09-2017, 12:12 AM	#5
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: Gates, roofs, doors, fenders. MN>TX Interested in the doors, what’s your route going to be ? I am 35 miles west of Chicago. Thanks John

12-09-2017, 11:17 AM	#7
718jwh Registered User Join Date: Dec 2014 Location: naperville Il Posts: 236	Re: Gates, roofs, doors, fenders. MN>TX We could probably work out a meeting place, I will PM you

12-10-2017, 07:15 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX pics... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-10-2017, 07:18 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX More Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-12-2017, 02:35 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX Few more pics for john Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-19-2017, 10:24 PM	#13
garciajulian Registered User Join Date: Nov 2016 Location: Frisco Tx Posts: 55	Re: Gates, roofs, doors, fenders. MN>TX I'll take the blue one $400 if the others don't want them I live in nothern Texas and can meet you just let me know when your comming thru thanks.

12-21-2017, 11:24 PM	#15
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX Is the grille for sale?

12-22-2017, 11:29 PM	#17
garciajulian Registered User Join Date: Nov 2016 Location: Frisco Tx Posts: 55	Re: Gates, roofs, doors, fenders. MN>TX OK sure would like to see them

12-22-2017, 11:46 PM	#18
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX Ok thanks. I live just south of Dallas. Could meet up when you get down here if it's in better shape than the one I've got.

12-23-2017, 03:21 AM	#19
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Gates, roofs, doors, fenders. MN>TX ugh....thought about "getting in line" for those 1972 doors but I looked at a map, looks to be at least a 3 day one-way trip for me.

12-23-2017, 10:42 AM	#20
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Gates, roofs, doors, fenders. MN>TX On second thought, I reverse my decision....I'll get in line for those doors if the first fellow decides against those. *If you can allow me to come get those in March when I have the time off from work.



Register or Log In To remove these advertisements.

12-23-2017, 07:16 PM	#21
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX Back of gate and grill pics. In the ten ring, I will have you in line for doors if anything falls through. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-23-2017, 07:21 PM	#22
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: Gates, roofs, doors, fenders. MN>TX Grill... That is ice and pine needles frozen around the headlight on the pass side. It will clean up ok, but will still be driver condition. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-23-2017, 07:53 PM	#24
70 C/K 20 Registered User Join Date: Nov 2017 Location: Waxahachie Texas Posts: 20	Re: Gates, roofs, doors, fenders. MN>TX If you have a decent tailgate left by the time you get here I may take that too. Don't happen to have a chrome front or rear bumper do you?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.