Question for Mothertruckers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red71cheyenne · 10-31-2003, 05:04 PM

What kind of seam sealer do you use when re-assembling the cab parts? I'd like something that will last as well as the original stuff. Thanks, Jeff.

red71cheyenne · 10-31-2003, 07:29 PM

ttt

FRENCHBLUE72 · 10-31-2003, 08:57 PM

ttt for ya

red71cheyenne · 10-31-2003, 11:02 PM

thanks blue!

BUXMAN66 · 11-01-2003, 02:42 AM

don't know about the actual seam that you're talking of .....but if it happens to be the seam in the floor pan(from edge of kick panel over to the other kick panel) as well as the edge of the kick panels to the firewall,behind the gas tank, etc..... i used "por-patch" as you've prolly guessed it ,is a product of por-15.comes in a tube and is a concentrated version ...much thicker than the rust prohibitor "por-15". go here and take a look www.por-15.com/product.asp?productid=8

10-31-2003, 05:04 PM	#1
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Question for Mothertruckers What kind of seam sealer do you use when re-assembling the cab parts? I'd like something that will last as well as the original stuff. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

10-31-2003, 08:57 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	ttt for ya __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-31-2003, 11:02 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	thanks blue! __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

11-01-2003, 02:42 AM	#5
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	don't know about the actual seam that you're talking of .....but if it happens to be the seam in the floor pan(from edge of kick panel over to the other kick panel) as well as the edge of the kick panels to the firewall,behind the gas tank, etc..... i used "por-patch" as you've prolly guessed it ,is a product of por-15.comes in a tube and is a concentrated version ...much thicker than the rust prohibitor "por-15". go here and take a look www.por-15.com/product.asp?productid=8 __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-31-2003, 07:29 PM	#2
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.