CA WTB HO-52/72 4.10 gears

[Short 3/4]

Just need good ring and pinion, but will buy whole center section. Also might be interested in rear brake parts. Thanks, Tom

[1960chevypanel]

I can help with the brake parts. No pumpkins..

[Short 3/4]

Originally Posted by 1960chevypanel

I can help with the brake parts. No pumpkins..

Looking for parts for 12x2 with slid on drums for a K20, 64-? What do you have?

[aotte1]

Ok,
The 4:10 or 4:11 gears are not very common. They are more common in the later years the Easton rear was used, especially behind automatic transmissions.
You may want to also ask in 67-72 parts section. Most common on 69 to 72 trucks, but still kind of rare. You might even find a "No-Spin".

Hope this helps.

[Short 3/4]

Originally Posted by aotte1

Ok,
The 4:10 or 4:11 gears are not very common. They are more common in the later years the Easton rear was used, especially behind automatic transmissions.
You may want to also ask in 67-72 parts section. Most common on 69 to 72 trucks, but still kind of rare. You might even find a "No-Spin".

Hope this helps.

I did post there as well, thanks for the tip, Tom

[Bucky10pt]

I've got one I'll have to check what it is when I can dig outta snow

[CousinTone]

Originally Posted by Short 3/4

Just need good ring and pinion, but will buy whole center section. Also might be interested in rear brake parts. Thanks, Tom

Tom, I have a 64 C20 that I'm converting to 1/2 ton for ride purposes and I"ve got what I believe is an HO72 rear end. I turned it manually and it appears to have 4:10/4:11. I"ll go under and take some pictures of it. I'm in North Orange County and its not too far of a BEAUTIFUL drive down. I'll let you know and post pictures of what I've got tomorrow in the sunlight (rain if forecast but I'm thinking positive). If i have what you're looking for, I'll pass on a good price since someone else on the board set me up on the new rear end, What goes around comes around. Tony

[Short 3/4]

Originally Posted by CousinTone

Tom, I have a 64 C20 that I'm converting to 1/2 ton for ride purposes and I"ve got what I believe is an HO72 rear end. I turned it manually and it appears to have 4:10/4:11. I"ll go under and take some pictures of it. I'm in North Orange County and its not too far of a BEAUTIFUL drive down. I'll let you know and post pictures of what I've got tomorrow in the sunlight (rain if forecast but I'm thinking positive). If i have what you're looking for, I'll pass on a good price since someone else on the board set me up on the new rear end, What goes around comes around. Tony

Thanks Tony,
Found a good one locally, so no longer looking. Hopefully you can find it a good home as I know others looking for that ratio.
Appreciate the offer,
Tom

[Short 3/4]

Originally Posted by Bucky10pt

I've got one I'll have to check what it is when I can dig outta snow

I found one, but thanks anyway, Tom

[Killer Bee]

dang, late to this one but I'm not far, actually driving near you to pick up a D60 posi 4:10 to replace my HO52 completely..

mine is leaf sprung and 40.5" spring perch centers.. it will find a good home some day I suppose..

good job finding what you needed!

[RedRoad]

I would be interested in a 4.10 center. Post some pics if possible

Thanks

[oem4me]

Also interested in a 4.10 -Burbank area

[Short 3/4]

Originally Posted by Killer Bee

dang, late to this one but I'm not far, actually driving near you to pick up a D60 posi 4:10 to replace my HO52 completely..

mine is leaf sprung and 40.5" spring perch centers.. it will find a good home some day I suppose..

good job finding what you needed!

Sorry did not work out with me but looks like lots of interest. Your rear would not happen to be from a K20 with the slide on 12x2 drums is it? Been keeping my eye out for that set up
Thanks, Tom

[Killer Bee]

^ yep, out of '71 K20 Burb, no idea about brakes, haven't got to inspecting wheel ends yet.. yer welcome to send pm, that axle is coming out complete as soon a D60 is set up, picked it up already

[racenhogs]

Do anyone have a center section that I can buy...I have a 54 3600 that needs a gear change and want to find an HO-52 with the 4.10 gear.

Thanks

[racenhogs]

Originally Posted by CousinTone

Tom, I have a 64 C20 that I'm converting to 1/2 ton for ride purposes and I"ve got what I believe is an HO72 rear end. I turned it manually and it appears to have 4:10/4:11. I"ll go under and take some pictures of it. I'm in North Orange County and its not too far of a BEAUTIFUL drive down. I'll let you know and post pictures of what I've got tomorrow in the sunlight (rain if forecast but I'm thinking positive). If i have what you're looking for, I'll pass on a good price since someone else on the board set me up on the new rear end, What goes around comes around. Tony

I'm in need of a center section...please HO 52 with the 4.10