Help with adding oem style tach. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

desert-rat · 01-23-2018, 02:50 PM

1969 GMC will be installing a new Tachometer Instrument Panel Gauge Cluster Set. My original doesn't have a tachometer but I would like one installed with one. Where do i connect to??

Coley · 01-23-2018, 03:03 PM

If you send me a pm with your e-mail I can send you a set of (pdf) instructions that I developed which outline how to remove the existing dash assembly and re-install with the Tach.
Its detailed and includes needed tools, time, methods and specifics....so far so good with it.
If you do it right...you can have your existing system out in about 15-20 minutes and re-installation, although a little longer....should still go well.

All good
Coley

demian5 · 01-23-2018, 05:15 PM

Quote:

Originally Posted by Coley

If you send me a pm with your e-mail I can send you a set of (pdf) instructions that I developed which outline how to remove the existing dash assembly and re-install with the Tach.
Its detailed and includes needed tools, time, methods and specifics....so far so good with it.
If you do it right...you can have your existing system out in about 15-20 minutes and re-installation, although a little longer....should still go well.

All good
Coley

Is there a place to post these instructions on the site as a resource?

Coley · 01-23-2018, 06:16 PM

Quote:

Originally Posted by demian5

Is there a place to post these instructions on the site as a resource?

Good question.....and I don't know.
I would be happy to have them available to the membership but its up to the mods
It is in a 3 page pdf file...

I have sent to several of the guys and I think it has been of assistance.

...lets see what the mods say, their call.

All good
Coley

**kwmech** · 01-23-2018, 10:21 PM

Quote:

Originally Posted by desert-rat

1969 GMC will be installing a new Tachometer Instrument Panel Gauge Cluster Set. My original doesn't have a tachometer but I would like one installed with one. Where do i connect to??

A question to ask is whether or not you have an existing gauge instrument cluster or dummy lights

desert-rat · 01-24-2018, 10:28 AM

The top one is the one I have now. The bottom is the setup I want. Rpm, clock, added, no booster. Pretty much the bottom is the one I want. Wanting to know how to wire that up. Thanks.

**Canuckvetter** · 01-24-2018, 10:37 AM

Title is a bit misleading. OEM (Original Manufacture Equipment ). Sure looks like you want an aftermarket set up. Lots of guy here should be able to help and have done that conversion.

Rich69shortfleet · 01-24-2018, 10:51 AM

I would also assume that whomever sells that aftermarket cluster also provides wiring instructions.

**Already Gone** · 01-24-2018, 02:23 PM

Quote:

Originally Posted by desert-rat

The top one is the one I have now. The bottom is the setup I want. Rpm, clock, added, no booster. Pretty much the bottom is the one I want. Wanting to know how to wire that up. Thanks.

That bottomcluster looks like a Classic Instrunents set up and if that is the case you can get what you need from them and in fact I believe you can get electronic sensors so no wiring needed.

**Already Gone** · 01-24-2018, 02:25 PM

Quote:

Originally Posted by Coley

If you send me a pm with your e-mail I can send you a set of (pdf) instructions that I developed which outline how to remove the existing dash assembly and re-install with the Tach.
Its detailed and includes needed tools, time, methods and specifics....so far so good with it.
If you do it right...you can have your existing system out in about 15-20 minutes and re-installation, although a little longer....should still go well.

All good
Coley

I have Colins guide and have used it a couple of times and it is an excellent resource for removing the gauge cluster and installing a factory tach , or just removing the cluster.

**TBONE1964** · 01-24-2018, 11:48 PM

If you need any help with this, let me know.

Classic Instrument clusters do need wiring. They need input from oil sender, temp sender and dash lights wired as well as VSS input from trans and tach signal from ign coil. They also need speedometer and tach calibration which is clearly stated in the instructions provided by the company with the cluster.

If you want to have a stock style tach cluster built, I can do that for you if needed.

Hope this helps,
Tom

desert-rat · 01-25-2018, 04:15 AM

Thanks everybody for all your responses. I did check and it is a classic instruments cluster. I called them up and they said all sensors and wiring are provided with the exception of One sensor but I forgot which one.

01-23-2018, 02:50 PM	#1
desert-rat Registered User Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 372	Help with adding oem style tach. 1969 GMC will be installing a new Tachometer Instrument Panel Gauge Cluster Set. My original doesn't have a tachometer but I would like one installed with one. Where do i connect to??

01-23-2018, 03:03 PM	#2
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Help with adding oem style tach. If you send me a pm with your e-mail I can send you a set of (pdf) instructions that I developed which outline how to remove the existing dash assembly and re-install with the Tach. Its detailed and includes needed tools, time, methods and specifics....so far so good with it. If you do it right...you can have your existing system out in about 15-20 minutes and re-installation, although a little longer....should still go well. All good Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

01-24-2018, 10:28 AM	#6
desert-rat Registered User Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 372	Re: Help with adding oem style tach. The top one is the one I have now. The bottom is the setup I want. Rpm, clock, added, no booster. Pretty much the bottom is the one I want. Wanting to know how to wire that up. Thanks. Attached Images

01-24-2018, 10:37 AM	#7
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: Help with adding oem style tach. Title is a bit misleading. OEM (Original Manufacture Equipment ). Sure looks like you want an aftermarket set up. Lots of guy here should be able to help and have done that conversion. __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

01-24-2018, 10:51 AM	#8
Rich69shortfleet Registered User Join Date: May 2016 Location: Waverly, NE Posts: 382	Re: Help with adding oem style tach. I would also assume that whomever sells that aftermarket cluster also provides wiring instructions. __________________ 1965 Malibu SS L79 Restoration Page 1965 Two-Door Wagon Project Progress Page 2006 Pontiac GTO Preservation Project Rich Cummings

01-24-2018, 11:48 PM	#11
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Help with adding oem style tach. If you need any help with this, let me know. Classic Instrument clusters do need wiring. They need input from oil sender, temp sender and dash lights wired as well as VSS input from trans and tach signal from ign coil. They also need speedometer and tach calibration which is clearly stated in the instructions provided by the company with the cluster. If you want to have a stock style tach cluster built, I can do that for you if needed. Hope this helps, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

01-25-2018, 04:15 AM	#12
desert-rat Registered User Join Date: Jan 2013 Location: 3,018 feet above the SoCal/Mojave Desert region. Posts: 372	Re: Help with adding oem style tach. Thanks everybody for all your responses. I did check and it is a classic instruments cluster. I called them up and they said all sensors and wiring are provided with the exception of One sensor but I forgot which one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.