CO clock on dash 1965 1966

[yelmer]

for sale on dash clock good condition i do not know if it works need small screws to attach sold as is 375.00 free shipping in usa

[DPowers]

Nice

[402GMC]

i'll take it if you test and it works

[yelmer]

it does not work it will need cleaned and checked . i would go 330.00 i also have another one same issue if you want both 550.00

[yelmer]

now 275.00

[Budman56]

Originally Posted by yelmer

now 275.00

Nice

[nsb29]

Most times you can wash them out with liter fluid and thay will work again the liter fluid will remove old hard oils and leave just enough lube it works 99% of the time if it has the original movment

[shortstep60]

I got a factory clock out of a !962 I found two week ago. I taken the sleeve off of it to check it out very clean. I blew it out and put some very thin oil on it and it work. I would never want to take one a part to many parts in there for me LOL

[nsb29]

Originally Posted by shortstep60

I got a factory clock out of a !962 I found two week ago. I taken the sleeve off of it to check it out very clean. I blew it out and put some very thin oil on it and it work. I would never want to take one a part to many parts in there for me LOL

That is the best thing about the lighter fluid you do not have to take it apart but it leaves just enough oil behind to keep it lubricated I work for a watchmaker back in the mid 60s after school that was an old trick of his most clocks were not worth the time to take them apart for cleaning and lubricating