PA 84-86 1/2 Ton Factory Aluminum Rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

My72BB · 03-03-2018, 03:29 PM

I sold the GMC Truck these were going to be put on:

Factory Aluminum 15" X 7" rims: Excellent driver condition with NO curb rash on any of the rims. Rims do need a good detailing to remove minor blemishes caused from normal driving over the years but NO nicks, curb rash or bends in any of them.

NOS GMC Caps go with them. Caps have never been mounted and are still wrapped in original bubble wrap except for 1 I took out for picture.

Missing 2 of the 12 screws that fasten to the rim.

$550.00 plus shipping. I can deliver in the PA/NC/NJ/DE/OH/VA area for a reasonable fee as well if that helps out.

Money order works best.

My72BB · 03-06-2018, 11:02 PM

Ttt...

My72BB · 03-09-2018, 05:18 PM

Price Drop $500.00 for rims and NOS caps.

+shipping. Western PA/Eastern OH/Virginia and North Carolina are areas I can deliver to for a small fee.

sweetk30 · 03-14-2018, 08:04 PM

any pics of them on a truck ? didn't know they had these back then .

I am a few hr north of you just over the boarder .

My72BB · 03-15-2018, 07:55 AM

These pictures are out of the 1986 Chevy Truck Brochure.

sweetk30 · 03-15-2018, 08:46 PM

great that helps me .. . . now to figure out if I want these or my steel 15x8 ralleys . . .

sweetk30 · 03-15-2018, 09:55 PM

do you get up 15 north much ? i am just over the boarder in ny off 15/99

My72BB · 03-16-2018, 12:50 PM

I don't...I'm willing to meet around 15 and I80 though...I will PM contact information.

Thx...Alan

sweetk30 · 03-16-2018, 08:04 PM

pm received . will be in contact real soon thanks .

My72BB · 04-02-2018, 08:54 AM

TTT...These are still available. I will be in the Raleigh and Charlotte, NC this week as well @ the Auto Fair Thursday/Friday if that helps on delivery.

Alan

My72BB · 04-03-2018, 07:19 PM

TTT...Still heading to North Carolina and can bring these along.

My72BB · 04-03-2018, 10:55 PM

Here are the rims with about 5 minutes each of Mothers Aluminum Polish...

*bowties11* · 04-03-2018, 11:49 PM

I will be at the spring rod run in peigon forge week of 4/16 interested

My72BB · 04-04-2018, 05:44 AM

I live in the Gettysburg, PA area so don't think that is going to work out to well for me. I'm only in Charlotte for Auto Fair Thursday/Friday.

sweetk30 · 04-04-2018, 08:00 AM

i told you i wanted these . i texted you a pic of the cash i have for them . you and i had a few good texts on the deal going . we even chatted a few min on the phone .

i figured we had a deal already . i told you last week was my oncall week at work and i couldnt leave the area .

you were nice to offer half way meat up and i was willing to work with that and thankfull.

i told you this week is not my oncall week and also sat or sunday i can meat up no problems.

i dont see what the big deal is ?

**1774btcrew** · 04-04-2018, 11:06 AM

This is a great deal on these! There are not many out there especially in this condition. I hope you get them sold!

sweetk30 · 04-04-2018, 05:44 PM

Quote:

Originally Posted by 1774btcrew

This is a great deal on these! There are not many out there especially in this condition. I hope you get them sold!

yes I do like them and that's why I wanted to deal . I figured we had a deal going .

still hope to get them . but waiting on reply back from him .

sweetk30 · 04-06-2018, 05:15 PM

so do I need to plan a trip sat or sun for these ? ? ?

be nice to know to make sure we can work a deal .

sweetk30 · 04-09-2018, 04:27 PM

so did these sell or not ?

03-03-2018, 03:29 PM	#1
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	1/2 Ton Factory Aluminum Rims I sold the GMC Truck these were going to be put on: Factory Aluminum 15" X 7" rims: Excellent driver condition with NO curb rash on any of the rims. Rims do need a good detailing to remove minor blemishes caused from normal driving over the years but NO nicks, curb rash or bends in any of them. NOS GMC Caps go with them. Caps have never been mounted and are still wrapped in original bubble wrap except for 1 I took out for picture. Missing 2 of the 12 screws that fasten to the rim. $550.00 plus shipping. I can deliver in the PA/NC/NJ/DE/OH/VA area for a reasonable fee as well if that helps out. Money order works best. Attached Images Last edited by My72BB; 03-04-2018 at 11:23 AM. Reason: Changed title.

03-06-2018, 11:02 PM	#2
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims Ttt...

03-09-2018, 05:18 PM	#3
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims Price Drop $500.00 for rims and NOS caps. +shipping. Western PA/Eastern OH/Virginia and North Carolina are areas I can deliver to for a small fee.

03-14-2018, 08:04 PM	#4
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims any pics of them on a truck ? didn't know they had these back then . I am a few hr north of you just over the boarder . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-15-2018, 07:55 AM	#5
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims These pictures are out of the 1986 Chevy Truck Brochure. Attached Images

03-15-2018, 08:46 PM	#6
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims great that helps me .. . . now to figure out if I want these or my steel 15x8 ralleys . . . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-15-2018, 09:55 PM	#7
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims do you get up 15 north much ? i am just over the boarder in ny off 15/99 __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-16-2018, 12:50 PM	#8
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims I don't...I'm willing to meet around 15 and I80 though...I will PM contact information. Thx...Alan

03-16-2018, 08:04 PM	#9
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims pm received . will be in contact real soon thanks . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

04-02-2018, 08:54 AM	#10
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims TTT...These are still available. I will be in the Raleigh and Charlotte, NC this week as well @ the Auto Fair Thursday/Friday if that helps on delivery. Alan

04-03-2018, 07:19 PM	#11
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims TTT...Still heading to North Carolina and can bring these along.

04-03-2018, 10:55 PM	#12
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims Here are the rims with about 5 minutes each of Mothers Aluminum Polish... Attached Images

04-03-2018, 11:49 PM	#13
bowties11 Account Suspended Join Date: May 2011 Location: jonesboro indiana Posts: 592	Re: 84-86 1/2 Ton Factory Aluminum Rims I will be at the spring rod run in peigon forge week of 4/16 interested

04-04-2018, 05:44 AM	#14
My72BB Registered User Join Date: Oct 2007 Location: Fairfield, PA Posts: 503	Re: 84-86 1/2 Ton Factory Aluminum Rims I live in the Gettysburg, PA area so don't think that is going to work out to well for me. I'm only in Charlotte for Auto Fair Thursday/Friday.

04-04-2018, 08:00 AM	#15
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims i told you i wanted these . i texted you a pic of the cash i have for them . you and i had a few good texts on the deal going . we even chatted a few min on the phone . i figured we had a deal already . i told you last week was my oncall week at work and i couldnt leave the area . you were nice to offer half way meat up and i was willing to work with that and thankfull. i told you this week is not my oncall week and also sat or sunday i can meat up no problems. i dont see what the big deal is ? __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.



Register or Log In To remove these advertisements.

04-04-2018, 11:06 AM	#16
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: 84-86 1/2 Ton Factory Aluminum Rims This is a great deal on these! There are not many out there especially in this condition. I hope you get them sold! __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

04-06-2018, 05:15 PM	#18
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims so do I need to plan a trip sat or sun for these ? ? ? be nice to know to make sure we can work a deal . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

04-09-2018, 04:27 PM	#19
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 84-86 1/2 Ton Factory Aluminum Rims so did these sell or not ? __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.