CO Restored 67 gauge cluster and glove box set

[Curtb1971]

Up for grabs is a restored 1967 only 7-hole cluster and glove box door package. Gauging if the is a interest for others as well on these. Here's the details of the work done using all oem parts
Cluster
-Tin's bead blasted and painted
-Gauges cleaned and needles painted
-Lens polished
-Gauges and lights tested for proper function
-67' only bezel restored and painted to OEM colors
-Speedo set to 6.7 miles
-oem hardware acid cleaned, painted and new stainless hardware for circuit board.
Glove box door
-Professionally dip stripped to bare metal, sealed, primed and painted to match the gauge cluster
-oem hardware acid cleaned and painted
-Latch polished to shine and greased
-Hinge and 67' only stop bead blasted and painted (also have 68+ stops with the rubber bumper if wanted)

$500 shipped/insured conus

Also can build this cluster with an oem V8 tach for an additional $200

Let me know any questions
Thanks, Curt

[Curtb1971]

Cluster pics

[Curtb1971]

Glove box door pic

[nds1968]

Very nice, I'll have to keep you in mind...

[countr]

Curt, that is sweet!!!!! I can not wait to see the one you did for my 67 4x4!

Russ

[Curtb1971]

Originally Posted by nds1968

Very nice, I'll have to keep you in mind...

Thanks man

Originally Posted by countr

Curt, that is sweet!!!!! I can not wait to see the one you did for my 67 4x4!

Russ

Thanks Russ, got yours and a glove box door tucked away in your stash!

[jocko]

Good luck on your sale - that is a beautiful combo that you don't see restored very often.

[Njeiv]

I’ll take it

[Curtb1971]

Originally Posted by Njeiv

I’ll take it

PM with payment info sent for the setup with an oem V8 tach and 80lbs oil gauge. I'll post up some pics when I get it done this week. Thanks, Curt

[Curtb1971]

Originally Posted by jocko

Good luck on your sale - that is a beautiful combo that you don't see restored very often.

Thanks Jocko I figured I'd better do glove box doors to match the clusters I've been restoring for the 67 guys.

[dec010974]

Is this a weld on part or can this unit be bolted on? I Didn't know that dash, glove box cap comes off. I may be Interested in one of these later on in my build.

[Curtb1971]

Originally Posted by dec010974

Is this a weld on part or can this unit be bolted on? I Didn't know that dash, glove box cap comes off. I may be Interested in one of these later on in my build.

If your talking about the dash assembly (yellow part) then this part is spot welded at the lower half of the windshield and also bolted at the A pillars. I used this just to take pictures for the gauge cluster and glove box door but never intended it to be part of the sale. All the other components are bolt on. Hope that answered your question

[Rods]

Hey Curt do you have anymore of these available ?

[35boulder]

Nice looking combo. Nice work.

[Curtb1971]

Originally Posted by Rods

Hey Curt do you have anymore of these available ?

Rod, I have a (2) extra glove box doors completed with the run I did and an assortment of 3 & 7 hole 67 bezels that need completed to make a cluster set. Can build pretty much any variation of a cluster

Originally Posted by 35boulder

Nice looking combo. Nice work.

Thanks man, these are a blast fixing up

[projectking]

How much to restore if I sent you the cluster and door? I want to retain the original SPID.

[Curtb1971]

Originally Posted by projectking

How much to restore if I sent you the cluster and door? I want to retain the original SPID.

You know this question has come up before and it would be risky for the both of us as in the shipping process. I wouldn't want your original spid being lost in the mail going to or from. Clusters and parts are replaceable but OE spids arent. It's do able as far as the work but there is that risk involved. I've done a couple of these where guys just retain their original door and use the ones I provided in their truck.

[Rods]

Curt I’m in for two 7 hole with tach and the glove box doors.....

[Curtb1971]

Originally Posted by Rods

Curt I’m in for two 7 hole with tach and the glove box doors.....

I'm completing the one for Njeiv soon then I'll start working on other bezels I have and will keep you posted. Pm sent Thanks, Curt

[projectking]

Originally Posted by Curtb1971

You know this question has come up before and it would be risky for the both of us as in the shipping process. I wouldn't want your original spid being lost in the mail going to or from. Clusters and parts are replaceable but OE spids arent. It's do able as far as the work but there is that risk involved. I've done a couple of these where guys just retain their original door and use the ones I provided in their truck.

Pm sent

[Curtb1971]

Ok Njeiv, got the 4x4 stickers for your door and placed in the original location thanks to member countr for sending me his original glove box door 67' tach cluster with 80lbs oil gauge is completed. I'll test/calibrate the tach tomorrow then it will be headed your way. Thanks, Curt

[Njeiv]

Lookin great! Thanks for the update, can hardly wait to receive it.

[philB]

the tach to use with HEI dist. is differant or can that be added to 7 gauge cluster.

[Curtb1971]

Originally Posted by philB

the tach to use with HEI dist. is differant or can that be added to 7 gauge cluster.

You can use a oem tachometer running a HEI distributor or the original ignition coil. The only difference is the connectors on the tach harness. A tach cluster is a whole different animal vs a regular gauge setup because the tins, lens and circuit board a different, plus the tach. Hope that answered your question

[arcticman]

I would be interested in a set for my 67 GMC k1500 I have a good glove box door all my gauges work but PO overtightened the screws on the bezel. can you repair that? no missing pieces just cracked.

PROJECTKING asked how much if parts were sent ?

I have a GMC and they did not use SPID label in 1967 so that's not an issue.
they look nice.
what is your turn around time not inc. shipping?
Thanks,