Drop down panhard bar mount - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Robznob11 · 03-10-2018, 10:47 PM

Hey all, does anyone know where to buy a drop down panhard bar mount ? I just installed a 9” and the straight bar wont work. I know I could run a bent bar but it seems a drop down would be about the same price and probably better geometry for a bagged truck.
Thanks for the help!

drfloyd · 03-14-2018, 07:57 AM

How much drop do you need? Rob at No Limit could probably make you one if they don't have one in stock. I didn't use a drop on mine but my mount on the housing is spaced away from the housing so that it clears.

Robznob11 · 03-14-2018, 08:56 AM

I ended up ordering the cpp bent bar, but I still think it would be a better set up with about a 4" drop on the frame Mount.

68c10airstream · 03-14-2018, 05:19 PM

My 68 c10 got a ford 9" and i installed a porterbuilt pan hard bar kit including a new frame mount. I'm running 4" drop ece springs with 1" lowering blocks, 18" wheels and the bar sits horizontal and parallel to the rear end.

03-10-2018, 10:47 PM	#1
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Drop down panhard bar mount Hey all, does anyone know where to buy a drop down panhard bar mount ? I just installed a 9” and the straight bar wont work. I know I could run a bent bar but it seems a drop down would be about the same price and probably better geometry for a bagged truck. Thanks for the help! __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

03-14-2018, 07:57 AM	#2
drfloyd Registered User Join Date: Sep 2015 Location: Scranton, SC Posts: 248	Re: Drop down panhard bar mount How much drop do you need? Rob at No Limit could probably make you one if they don't have one in stock. I didn't use a drop on mine but my mount on the housing is spaced away from the housing so that it clears. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=709504

03-14-2018, 08:56 AM	#3
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Drop down panhard bar mount I ended up ordering the cpp bent bar, but I still think it would be a better set up with about a 4" drop on the frame Mount. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

03-14-2018, 05:19 PM	#4
68c10airstream Registered User Join Date: Mar 2013 Location: Marquette michigan Posts: 828	Re: Drop down panhard bar mount My 68 c10 got a ford 9" and i installed a porterbuilt pan hard bar kit including a new frame mount. I'm running 4" drop ece springs with 1" lowering blocks, 18" wheels and the bar sits horizontal and parallel to the rear end.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.