|
06-28-2018, 10:30 PM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: Austin Arkansas
Posts: 252
|
72 brake booster
Can I use my original booster brackets that bolt to fire wall on a after marker dual diaphragm booster?????????
__________________
OLDIRONRACING |
|
|
|
06-28-2018, 10:50 PM
|
#2 |
|
Junior Member
 Join Date: Jul 2014
Location: Huntsville, AL
Posts: 75
|
Re: 72 brake booster
Don't see why not. If the booster is designed for the truck then the bolt pattern for both the bracket and the master cylinder should be the same. On the back of the boosters you should probably check the position of the pistons. You may need to adjust the pivot arm slightly if they're different.
|
|
|
|
|
06-29-2018, 02:44 AM
|
#3 |
|
Scrapper 1
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
|
Re: 72 brake booster
all of the 1968--72 have 4 bolt hols on the fire wall the 1967 not sure But Its like new trucks that have options but it did not come with.The wiring is not there But the holes are there for the upgrade.GM was wonderful about that make one that fits all options
|
|
|
|
|
06-29-2018, 05:05 AM
|
#4 |
|
Collector of Projects
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
|
Re: 72 brake booster
Use a CaptainFab bracket to clean up the firewall but you also need to swap to a lokar cable operated column shifter unless you have a floor shifter. Mounting the booster closer to the firewall causes interference with the factory column shifter.
http://www.67-72chevytrucks.com/vboa...d.php?t=347484 
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
