OH Bucket seat braces - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**atog** · 09-07-2018, 11:17 AM

I recently had my buddy’s local fab shop make me some bucket seat floor braces and had to get a quantity in order to keep cost down. These are thicker than originals as they are made out of almost 1/8 inch steel. They are not 100% identical but I feel they are stronger and will be better than the rusted ones we are used to finding $150 shipped in conus. I started a new post due to poor pictures before

**atog** · 09-07-2018, 11:19 AM

Two

**atog** · 09-07-2018, 11:21 AM

Three

**atog** · 09-07-2018, 11:22 AM

Four

**hevy_chevy67** · 09-14-2018, 10:05 AM

PM sent.

Stagerunner · 09-15-2018, 11:40 PM

What is the cost?

**special-K** · 09-16-2018, 07:15 AM

Quote:

Originally Posted by Stagerunner

What is the cost?

i'm seeing $150 shipped.

This is a great part, but I sold my bucket seats.

old51sedan · 09-16-2018, 10:20 AM

I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together.
I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct.
You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

**DaHos** · 09-16-2018, 10:34 AM

If you are heading up to MI today I will take one if you can bring it with you.....

**atog** · 09-16-2018, 01:04 PM

Quote:

Originally Posted by DaHos

If you are heading up to MI today I will take one if you can bring it with you.....

Will do. I have some in truck already along with a blue fender

**DaHos** · 09-16-2018, 01:07 PM

Quote:

Originally Posted by atog

will do. I have some in truck already along with a blue fender

ty !!

bluek5 · 09-16-2018, 02:56 PM

Quote:

Originally Posted by old51sedan

I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together.
I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct.
You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

The brace goes on the underside of the cab.

**Already Gone** · 09-16-2018, 03:32 PM

Quote:

Originally Posted by old51sedan

I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together.
I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct.
You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

If your truck came with a bench seat from the factory then the holes for the buckets are in a different place. The brace only works for the inside front holes of the buckets. You need to remove the outboard front and rear braces and replace them with bucket seat braces. If you have a factory console when you get down to the bare floor you will see 4 dimples in the floor when the console bolts too.

old51sedan · 09-16-2018, 06:12 PM

Thank you so much for answering my question in regards to concerns on installing buckets. Truck is currently stripped down to nothing, so when I go to the paint shop I will be looking for the dimples for the center council. What do you mean by outboard front and rear braces? Are you talking about the tracks off the bench seat compared to the ones on the buckets?

**Already Gone** · 09-16-2018, 09:17 PM

Quote:

Originally Posted by old51sedan

Thank you so much for answering my question in regards to concerns on installing buckets. Truck is currently stripped down to nothing, so when I go to the paint shop I will be looking for the dimples for the center council. What do you mean by outboard front and rear braces? Are you talking about the tracks off the bench seat compared to the ones on the buckets?

By outboard I mean closest to the door. Here is apretty good thread on the bucket seat floor.

http://67-72chevytrucks.com/vboard/s...d.php?t=562904

old51sedan · 09-17-2018, 08:36 AM

I appreciate the information on the bucket seat installation. It's a lot clearer now, time to start measuring. Thanks again

**atog** · 09-19-2018, 06:35 PM

Special k bluek5 and alreadygone thanks for your replies and help. I’ve been out of commission for last couple days and appreciate your help. Been trying to do too much at one time and heat got the best of me. Been catching up on much needed rest. Daughter is getting married Saturday so that just adds more to the workload. Marriages have came a long way since I tied the knot . 200 plus people and catering. UBELIEVABLE

rustyrexiusrodz · 09-20-2018, 10:45 PM

This is a cool product

Robert Martin · 09-22-2018, 08:57 AM

Do these braces go on each side for the sport buckets? Seeing how both seat buckets have different mounting frames, one is stationary and one has an adjusting seat.

**atog** · 09-22-2018, 10:13 AM

These are like the ones under blazers and 69-72 pickups with bucket seats. This is the front brace that’s tac welded underneath. You will still need the rear brackets which roger Koop sells on the board

snow man · 09-24-2018, 11:45 AM

have any of these brackets left? need payment address info

**atog** · 09-24-2018, 05:39 PM

Quote:

Originally Posted by snow man

have any of these brackets left? need payment address info

Yes I still have some My PayPal is atog65@live.com

**randy.powell** · 09-26-2018, 09:40 AM

Hey Gunner - still have another set? If so, I'll take one.
B/R,
Randy

**atog** · 09-26-2018, 09:47 AM

I still have a few

snow man · 09-26-2018, 11:05 AM

pay pal sent

09-07-2018, 11:17 AM	#1
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Bucket seat braces I recently had my buddy’s local fab shop make me some bucket seat floor braces and had to get a quantity in order to keep cost down. These are thicker than originals as they are made out of almost 1/8 inch steel. They are not 100% identical but I feel they are stronger and will be better than the rusted ones we are used to finding $150 shipped in conus. I started a new post due to poor pictures before Attached Images Last edited by atog; 09-21-2018 at 03:48 AM.

09-07-2018, 11:19 AM	#2
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Bucket seat braces Two Attached Images

09-07-2018, 11:21 AM	#3
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Bucket seat braces Three Attached Images

09-07-2018, 11:22 AM	#4
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Bucket seat braces Four Attached Images

09-14-2018, 10:05 AM	#5
hevy_chevy67 Registered User Join Date: May 2005 Location: Blackfalds, Alberta Posts: 593	Re: Bucket seat braces PM sent. __________________ 1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e

09-15-2018, 11:40 PM	#6
Stagerunner Registered User Join Date: Feb 2015 Location: St. Louis, mo Posts: 66	Re: Bucket seat braces What is the cost?

09-16-2018, 10:20 AM	#8
old51sedan Registered User Join Date: Oct 2015 Location: Williamston, Mi Posts: 884	Re: Bucket seat braces I may be interested in one of your bucket seat braces, but I personally ( and maybe others) don't know that much about bucket seat installation. Not meaning to high jack your post, but I feel they kind of go together. I have a set of original buckets, I have not tried to install yet, but have the feeling they just do not fit in the same holes as the bench seat. Not to sound silly, but I take it that this braces goes on the inside of the truck and bolts to either the front set of holes or the rear set, is this correct. You need to educate some of us new guys on how this brace works, it may help sell you product if we know more about it. Thanks!

09-16-2018, 10:34 AM	#9
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: Bucket seat braces If you are heading up to MI today I will take one if you can bring it with you..... __________________ 1967 C10 SWB Owner - Rustbelt Restorations

09-16-2018, 06:12 PM	#14
old51sedan Registered User Join Date: Oct 2015 Location: Williamston, Mi Posts: 884	Re: Bucket seat braces Thank you so much for answering my question in regards to concerns on installing buckets. Truck is currently stripped down to nothing, so when I go to the paint shop I will be looking for the dimples for the center council. What do you mean by outboard front and rear braces? Are you talking about the tracks off the bench seat compared to the ones on the buckets?

09-17-2018, 08:36 AM	#16
old51sedan Registered User Join Date: Oct 2015 Location: Williamston, Mi Posts: 884	Re: Bucket seat braces I appreciate the information on the bucket seat installation. It's a lot clearer now, time to start measuring. Thanks again

09-19-2018, 06:35 PM	#17
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Bucket seat braces Special k bluek5 and alreadygone thanks for your replies and help. I’ve been out of commission for last couple days and appreciate your help. Been trying to do too much at one time and heat got the best of me. Been catching up on much needed rest. Daughter is getting married Saturday so that just adds more to the workload. Marriages have came a long way since I tied the knot . 200 plus people and catering. UBELIEVABLE

09-20-2018, 10:45 PM	#18
rustyrexiusrodz Registered User Join Date: Jan 2012 Location: Olympia, Wa Posts: 476	Re: Bucket seat braces This is a cool product __________________ olyhotrodz

09-22-2018, 08:57 AM	#19
Robert Martin Registered User Join Date: Jun 2017 Location: Claremore Oklahoma Posts: 362	Re: Bucket seat braces Do these braces go on each side for the sport buckets? Seeing how both seat buckets have different mounting frames, one is stationary and one has an adjusting seat.

09-22-2018, 10:13 AM	#20
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Bucket seat braces These are like the ones under blazers and 69-72 pickups with bucket seats. This is the front brace that’s tac welded underneath. You will still need the rear brackets which roger Koop sells on the board

09-24-2018, 11:45 AM	#21
snow man Registered User Join Date: Mar 2002 Location: mt. zion illinois Posts: 276	Re: Bucket seat braces have any of these brackets left? need payment address info



Register or Log In To remove these advertisements.

09-26-2018, 09:40 AM	#23
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	Re: Bucket seat braces Hey Gunner - still have another set? If so, I'll take one. B/R, Randy

09-26-2018, 09:47 AM	#24
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,525	Re: Bucket seat braces I still have a few

09-26-2018, 11:05 AM	#25
snow man Registered User Join Date: Mar 2002 Location: mt. zion illinois Posts: 276	Re: Bucket seat braces pay pal sent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.