The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-26-2018, 01:11 PM   #1
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
Fusibile Link Q

Question about the fusibile link on the red wire that goes from the junction block on the RF fender to the voltage regulator. Where the fusibile link joins the red wire, there's a hard black plastic or rubber cylinder, just under 1" long, covering the factory connection. Is it simply an insulator? I need to replace my fusibile link -- the old one is bad all the way to that insulator and I need to eliminate it and connect the red wire to a new fusibile link. Just want to make sure it's OK to remove it. Pic of what I'm asking about:

__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Old 09-26-2018, 02:26 PM   #2
redneckgames
Registered User
 
Join Date: Sep 2018
Location: Lincolnton, NC
Posts: 21
Re: Fusibile Link Q

It is just a plastic insulator over a metal crimp.
redneckgames is offline   Reply With Quote
Old 09-26-2018, 02:43 PM   #3
Ol Blue K20
Proprietor of Dale's Corner
 
Ol Blue K20's Avatar
 
Join Date: Nov 2012
Location: Vacaville , CA
Posts: 16,245
Re: Fusibile Link Q

X2, it just an insulator for the crimp joining the fusible link to the wire. I use a good butt connector and heat shrink to seal out moisture and add extra insulation.
__________________
"Some Days Chickens And Some Days Feathers"

Dale
XNGH ECV Sam Brannan 1004

R.I.P. 67ChevyRedneck
R.I.P. Grumpy Old Man
R.I.P. FleetsidePaul
Ol Blue K20 is offline   Reply With Quote
Old 09-26-2018, 02:46 PM   #4
redneckgames
Registered User
 
Join Date: Sep 2018
Location: Lincolnton, NC
Posts: 21
Re: Fusibile Link Q

Quote:
Originally Posted by Ol Blue K20 View Post
X2, it just an insulator for the crimp joining the fusible link to the wire. I use a good butt connector and heat shrink to seal out moisture and add extra insulation.
I just done the same thing yesterday on my Camaro. I just used smaller gauge wire. I cut the wire right before the black plastic.
redneckgames is offline   Reply With Quote
Old 09-26-2018, 03:24 PM   #5
Hammond68
Registered User
 
Join Date: Mar 2018
Location: Bennettsville sc
Posts: 105
Re: Fusibile Link Q

Quote:
Originally Posted by redneckgames View Post
I just done the same thing yesterday on my Camaro. I just used smaller gauge wire. I cut the wire right before the black plastic.
You don't want to do it that way. The insulation on a fusible link won't catch fire when overheated. Where as a smaller gauge wire will. They're only a few bucks.
Hammond68 is offline   Reply With Quote
Old 09-26-2018, 06:28 PM   #6
Stocker
20' Daredevil (Ret)
 
Stocker's Avatar
 
Join Date: May 2003
Location: Jefferson State
Posts: 13,722
Re: Fusibile Link Q

Thanks, guys! It went into the trash, but not before I cut it open to see for myself. Kinda curious why they used such an odd-looking insulator that doesn't appear to be used anywhere else on the truck. At least not that I have found. At any rate, I have a new fusible link and butt connector, everything soldered and with heat shrink on it.
__________________
- Mike -

1972 K20 LWB 350/350/205

RIP El Jay
Stocker is offline   Reply With Quote
Old 09-26-2018, 06:46 PM   #7
redneckgames
Registered User
 
Join Date: Sep 2018
Location: Lincolnton, NC
Posts: 21
Re: Fusibile Link Q

Quote:
Originally Posted by Hammond68 View Post
You don't want to do it that way. The insulation on a fusible link won't catch fire when overheated. Where as a smaller gauge wire will. They're only a few bucks.
Good to know. Guess I got some bad info. Thanks
redneckgames is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com