C H E V R O L E T hood letter template needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 11-28-2018, 03:21 PM

Does anybody have one of know of someone who does?

**Getter-Done** · 11-28-2018, 05:09 PM

Like the letters in my avatar?

**FirstOwner69** · 11-28-2018, 05:49 PM

Here are a couple links that may help:
Post 12 http://67-72chevytrucks.com/vboard/s...d.php?t=329097

Template http://67-72chevytrucks.com/vboard/s...d.php?t=647842

*randy500* · 11-28-2018, 06:21 PM

Quote:

Originally Posted by Getter-Done

Like the letters in my avatar?

Yes just like that.

*randy500* · 11-28-2018, 06:22 PM

Quote:

Originally Posted by FirstOwner69

Here are a couple links that may help:
Post 12 http://67-72chevytrucks.com/vboard/s...d.php?t=329097

Template http://67-72chevytrucks.com/vboard/s...d.php?t=647842

Thank you, I will check those links tonight, I found those or something similar and sent one guy a PM, but he hasn't been on the forum in 2 months.

**Getter-Done** · 12-02-2018, 09:57 PM

Randy
What do you think?
I still need to fine tune this Jig.
Working with this Today
enlightened me to other options.

Name: h1.JPG
Views: 1625
Size: 105.8 KB

The First E (In the pic Above) is just push in but not clamped
or bolted down.
The E's are Different. L &R
Learned something Today.

Name: h2.JPG
Views: 1512
Size: 98.1 KB

I had a Great Helper Today

The Gold hairy thing in the Picture
is Our Puppy.
My new addition
to the family.

Name: h4.JPG
Views: 1460
Size: 29.2 KB

*randy500* · 12-02-2018, 10:13 PM

Is that coated aluminum? If so can you trim the left side to match the hood peak for lining it up. Or do you set up the right side first, drilling the holes for the R on both sides and locate off the left R stud.

*randy500* · 12-02-2018, 10:16 PM

Whats the closest drill bit size, i will order a few bits.

**Getter-Done** · 12-02-2018, 11:49 PM

Actually it is steel sheet metal.
I had first planned aluminum and a lot more detail .
Yes the right side is the set up.
This locates the Most important/ R that is in the middle.
The Twist drills required are #24 (0.152) & #29 (0.136)
The right has scribe mark for alignment.
The left needed trimming for the (relief) to match.
That is just the Ruff phase.
I got 1 more Trick I hope to get this tweeked this week.

Number 24 drill for big holes on left
and number 29 for locating holes on the right.

*randy500* · 12-03-2018, 12:59 AM

Ok, looks good and sounds like you got a good plan there.

**Getter-Done** · 12-04-2018, 01:24 AM

Randy
I am making good Progress on the Jig.
Do you have the hood and new letters?
I got a couple of new pics of the jig .

*randy500* · 12-04-2018, 12:42 PM

I’m putting the Chevrolet letters on my current 68 gmc hood, I didn’t order the letters yet, probably will do that this week.

**Getter-Done** · 12-06-2018, 11:34 PM

Randy
I hope to ship that jig Monday.
I tried a few other options at a couple other templates.
I will get them Fine tuned this weekend.
Dwayne

*randy500* · 12-06-2018, 11:38 PM

Sounds good. Send me your paypal and i will send the money.

**Getter-Done** · 12-07-2018, 02:50 PM

Randy
I will pm you with all the info and stuff .
I was wondering
with you using your GMC hood
Do you need the template for
the big holes in back to install the nuts?
Or will you drill thru and then
drill the holes bigger?
Dwayne

*randy500* · 12-07-2018, 06:24 PM

Quote:

Originally Posted by Getter-Done

Randy
I will pm you with all the info and stuff .
I was wondering
with you using your GMC hood
Do you need the template for
the big holes in back to install the nuts?
Or will you drill thru and then
drill the holes bigger?
Dwayne

I am drilling all the way through with a long bit then opening the holes on the back with a larger bit.

**Getter-Done** · 12-07-2018, 11:54 PM

Randy
Can you work with this in the pics. Below?
I will work on the box to
Ship it this weekend.
No Instructions Included

You built a Tough Looking Crew cab.
So I know you got this.
Name: hl1.jpg
Views: 1368
Size: 102.3 KB

Name: hl2.JPG
Views: 1248
Size: 103.5 KB

*randy500* · 12-08-2018, 10:17 AM

Quote:

Originally Posted by Getter-Done

Randy
Can you work with this in the pics. Below?
I will work on the box to
Ship it this weekend.
No Instructions Included

You built a Tough Looking Crew cab.
So I know you got this.
Attachment 1845813

Attachment 1845814

Looks good, I trust you and that it will work. Send me your paypal info.

**Getter-Done** · 12-08-2018, 10:53 AM

Pm sent

**Getter-Done** · 12-10-2018, 07:12 PM

Package is on the way.
Thursday is projected day of arrival.

*randy500* · 12-10-2018, 08:57 PM

Thanks buddy, ordered the letters too, they should be here saturday or so

*randy500* · 12-14-2018, 07:06 PM

Template received and my hood letters arrived. Havent had a chance to order drill bits but will soon, thanks Getter-Done!

**Getter-Done** · 12-14-2018, 07:36 PM

Your Welcome
From my experience working at a tool and die shop
and working with stamping dies for several years.
I noticed something about the alignment.
If you get the holes drilled correctly,
the Top of the letters will line up
2 inches above the crease line
that is closest to the letters.
If you notice the tape I left on it.
A 2 inch piece of clear tape aligned with the bottom crease.
The 1 inch piece of tape even with the top of
the 2 inch tape.

my kids toy · 12-15-2018, 05:53 AM

Is this template for rent ?

**Getter-Done** · 12-15-2018, 04:59 PM

Quote:

Originally Posted by my kids toy

Is this template for rent ?

Yes I plan to rent it.
If it meets Randy's approval for ease of use and quality.
I am working with the Post Office about the most
economical way to ship.
Thanks for the Interest.

11-28-2018, 03:21 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	C H E V R O L E T hood letter template needed Does anybody have one of know of someone who does?

11-28-2018, 05:49 PM	#3
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: C H E V R O L E T hood letter template needed Here are a couple links that may help: Post 12 http://67-72chevytrucks.com/vboard/s...d.php?t=329097 Template http://67-72chevytrucks.com/vboard/s...d.php?t=647842

12-02-2018, 09:57 PM	#6
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Randy What do you think? I still need to fine tune this Jig. Working with this Today enlightened me to other options. The First E (In the pic Above) is just push in but not clamped or bolted down. The E's are Different. L &R Learned something Today. I had a Great Helper Today The Gold hairy thing in the Picture is Our Puppy. My new addition to the family. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-02-2018, 10:13 PM	#7
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed Is that coated aluminum? If so can you trim the left side to match the hood peak for lining it up. Or do you set up the right side first, drilling the holes for the R on both sides and locate off the left R stud.

12-02-2018, 10:16 PM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed Whats the closest drill bit size, i will order a few bits.

11-28-2018, 05:09 PM	#2
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Like the letters in my avatar? __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-02-2018, 11:49 PM	#9
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Actually it is steel sheet metal. I had first planned aluminum and a lot more detail . Yes the right side is the set up. This locates the Most important/ R that is in the middle. The Twist drills required are #24 (0.152) & #29 (0.136) The right has scribe mark for alignment. The left needed trimming for the (relief) to match. That is just the Ruff phase. I got 1 more Trick I hope to get this tweeked this week. Number 24 drill for big holes on left and number 29 for locating holes on the right. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build Last edited by Getter-Done; 12-02-2018 at 11:55 PM.

12-03-2018, 12:59 AM	#10
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed Ok, looks good and sounds like you got a good plan there.

12-04-2018, 01:24 AM	#11
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Randy I am making good Progress on the Jig. Do you have the hood and new letters? I got a couple of new pics of the jig . __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-04-2018, 12:42 PM	#12
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed I’m putting the Chevrolet letters on my current 68 gmc hood, I didn’t order the letters yet, probably will do that this week.

12-06-2018, 11:34 PM	#13
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Randy I hope to ship that jig Monday. I tried a few other options at a couple other templates. I will get them Fine tuned this weekend. Dwayne __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-06-2018, 11:38 PM	#14
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed Sounds good. Send me your paypal and i will send the money.

12-07-2018, 02:50 PM	#15
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Randy I will pm you with all the info and stuff . I was wondering with you using your GMC hood Do you need the template for the big holes in back to install the nuts? Or will you drill thru and then drill the holes bigger? Dwayne __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-07-2018, 11:54 PM	#17
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Randy Can you work with this in the pics. Below? I will work on the box to Ship it this weekend. No Instructions Included You built a Tough Looking Crew cab. So I know you got this. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-08-2018, 10:53 AM	#19
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Pm sent __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build



Register or Log In To remove these advertisements.

12-10-2018, 07:12 PM	#20
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Package is on the way. Thursday is projected day of arrival. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-10-2018, 08:57 PM	#21
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed Thanks buddy, ordered the letters too, they should be here saturday or so

12-14-2018, 07:06 PM	#22
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: C H E V R O L E T hood letter template needed Template received and my hood letters arrived. Havent had a chance to order drill bits but will soon, thanks Getter-Done!

12-14-2018, 07:36 PM	#23
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 8,404	Re: C H E V R O L E T hood letter template needed Your Welcome From my experience working at a tool and die shop and working with stamping dies for several years. I noticed something about the alignment. If you get the holes drilled correctly, the Top of the letters will line up 2 inches above the crease line that is closest to the letters. If you notice the tape I left on it. A 2 inch piece of clear tape aligned with the bottom crease. The 1 inch piece of tape even with the top of the 2 inch tape. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

12-15-2018, 05:53 AM	#24
my kids toy Registered User Join Date: May 2018 Location: Grand Haven, mi Posts: 269	Re: C H E V R O L E T hood letter template needed Is this template for rent ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.