trade your 3k truck w/10k cash for my truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

workingmans72 · 03-20-2002, 08:57 AM

see pics in link.
This truck is awesome and I consider it in mint condition, as if GM just
built it.
It has no Rust and has been compleatly frame off restored. Even the
wiring is new.
Strong 350 motor (i think it is original-runs smooth, quiet and
strong-will squeal tires)
TH350 Trans-shifts beautifully
Tach-factory
Tilt steering
Grant steering wheel
AC works but is low on freon.
New heater core
Edlebrock Carb w/elec. choke
Edlebrock intake
HEI ignition
Stainless exhaust
Underneath spare tire assembly new
Ram horn exhaust manifold
Great stereo-dash was not cut.
excellent Red cloth interior w/new Dash Pad
The wheels are "rally style" from an early 90's chevy PU
Tires are new
I have baby'ed this since I've owned it.
It uses about a quart of oil every 3000 miles.
My debt and job situation forces me to sell.
But I am hooked on these trucks.
I will consider a truck in lesser condition in trade with cash
( I am thinking 3k truck with 10k in cash)
Let me know what you think

Randy Blair
Austin, TX
wk# (512)427-3372
hm# (512) 689-8373
rblair@bexp3d.com

------------------
http://www.netSnapShot.com/pcw/b?KEY=0&ACCOUNT=2551
72 SWB, 350, Edlebrock Intake
Edlebrock Carb
K&N
Straight SS Pipes

dubie · 03-20-2002, 09:07 AM

Lets see if I can post a pic of it.

------------------
72 C/10 LWB 2wd
250 inline 6, 3 speed column shift. Soon to have a total facelift.

stllookn · 03-20-2002, 09:35 AM

Nice truck...don't sell it!

sam's 72 · 03-20-2002, 11:16 AM

I will swap you even, my truck for yours! I have a 72 LWB in the same shape as yours, I have always wanted a swb, so lets do it
sam

workingmans72 · 03-20-2002, 01:45 PM

dubie ....thanks for posting pic
sam's72 ....sorry, I need the money

------------------
http://www.netSnapShot.com/pcw/b?KEY=0&ACCOUNT=2551
72 SWB, 350, Edlebrock Intake
Edlebrock Carb
K&N
Straight SS Pipes

dubie · 03-20-2002, 02:29 PM

Anytime buddy. Here is a pic of the engine as well.

------------------
72 C/10 LWB 2wd
250 inline 6, 3 speed column shift. Soon to have a total facelift.

dropped72shortbed · 03-20-2002, 10:03 PM

workingman, does all the side trim bolt on to the body or is it adhered with automotive tape?

im trying to decide if i want to run trim on my 71 once i paint it, dont want to drill holes into it everywhere though....

Dean23 · 03-20-2002, 10:05 PM

wow sweet ride. looks great.

------------------
Dean
edmonton,canada
68 c10, project in works,350, th350, plain jane.
SLOW AND STEADY GETS THE PANELS READY
http://communities.msn.ca/MyChevytruckpage

03-20-2002, 08:57 AM	#1
workingmans72 Registered User Join Date: Oct 2001 Location: Austin,TX,USA Posts: 46	trade your 3k truck w/10k cash for my truck see pics in link. This truck is awesome and I consider it in mint condition, as if GM just built it. It has no Rust and has been compleatly frame off restored. Even the wiring is new. Strong 350 motor (i think it is original-runs smooth, quiet and strong-will squeal tires) TH350 Trans-shifts beautifully Tach-factory Tilt steering Grant steering wheel AC works but is low on freon. New heater core Edlebrock Carb w/elec. choke Edlebrock intake HEI ignition Stainless exhaust Underneath spare tire assembly new Ram horn exhaust manifold Great stereo-dash was not cut. excellent Red cloth interior w/new Dash Pad The wheels are "rally style" from an early 90's chevy PU Tires are new I have baby'ed this since I've owned it. It uses about a quart of oil every 3000 miles. My debt and job situation forces me to sell. But I am hooked on these trucks. I will consider a truck in lesser condition in trade with cash ( I am thinking 3k truck with 10k in cash) Let me know what you think Randy Blair Austin, TX wk# (512)427-3372 hm# (512) 689-8373 rblair@bexp3d.com ------------------ http://www.netSnapShot.com/pcw/b?KEY=0&ACCOUNT=2551 72 SWB, 350, Edlebrock Intake Edlebrock Carb K&N Straight SS Pipes __________________ http://www.netSnapShot.com/pcw/b?KEY=0&ACCOUNT=2551 72 SWB, 350, Edlebrock Intake Edlebrock Carb K&N Straight SS Pipes

03-20-2002, 09:07 AM	#2
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Lets see if I can post a pic of it. ------------------ 72 C/10 LWB 2wd 250 inline 6, 3 speed column shift. Soon to have a total facelift. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-20-2002, 09:35 AM	#3
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Nice truck...don't sell it! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-20-2002, 11:16 AM	#4
sam's 72 Senior Member Join Date: Nov 2001 Location: Pasadena, Texas, USA Posts: 1,005	I will swap you even, my truck for yours! I have a 72 LWB in the same shape as yours, I have always wanted a swb, so lets do it sam __________________ 72 LWB chevy truck. Pasadena, Texas

03-20-2002, 01:45 PM	#5
workingmans72 Registered User Join Date: Oct 2001 Location: Austin,TX,USA Posts: 46	dubie ....thanks for posting pic sam's72 ....sorry, I need the money ------------------ http://www.netSnapShot.com/pcw/b?KEY=0&ACCOUNT=2551 72 SWB, 350, Edlebrock Intake Edlebrock Carb K&N Straight SS Pipes __________________ http://www.netSnapShot.com/pcw/b?KEY=0&ACCOUNT=2551 72 SWB, 350, Edlebrock Intake Edlebrock Carb K&N Straight SS Pipes

03-20-2002, 02:29 PM	#6
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Anytime buddy. Here is a pic of the engine as well. ------------------ 72 C/10 LWB 2wd 250 inline 6, 3 speed column shift. Soon to have a total facelift. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

03-20-2002, 10:03 PM	#7
dropped72shortbed Registered User Join Date: Nov 2001 Posts: 303	workingman, does all the side trim bolt on to the body or is it adhered with automotive tape? im trying to decide if i want to run trim on my 71 once i paint it, dont want to drill holes into it everywhere though.... __________________ Blake A. - Huntington Beach CA 72 c10 swb 5/5 drop, 350/350, partialy shaved, soon to be 5/7 on 20s.

03-20-2002, 10:05 PM	#8
Dean23 68cst_ss490 Join Date: May 2001 Location: edmonton,canada Posts: 1,363	wow sweet ride. looks great. ------------------ Dean edmonton,canada 68 c10, project in works,350, th350, plain jane. SLOW AND STEADY GETS THE PANELS READY http://communities.msn.ca/MyChevytruckpage __________________ Dean edmonton,canada a winter wonderland 2005 Chevrolet Avalanche LT cold air intake, performance exhaust, Comp cams cam, jba shorty ceramic headers. http://www.cardomain.com/ride/3090973

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.