New LS Standalone Harness - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rabid Anti-Dentite · 01-30-2019, 04:38 PM

Not sure if this was allowed, and I do not endorse nor work for these sellers, but I was looking on eBay for a 5.3 standalone harness or rework, and all of the new harnesses look exactly the same, and sell for $349 + or so. Figuring that they all came from China, I hoped on Alibaba and did a little searching and chatting. Turns out there is only one manufacture in China that makes this harness, and they sell to everyone that carries it. When I asked about pricing, she told me $268 shipped for 1, or if I order 10 or more, the price goes to $240. She did say that she can customize the harness to any spec I wanted, whether that was added or removing sensors or trans and lengthen/shorten the ECM leads. So I ordered one for $268, figuring I will save about $100 vs eBay. I will do a review on it when I receive it.

Anyways, here is a link if anyone is interested:
https://www.alibaba.com/product-deta...52c38538gfq5ON

sweetk30 · 01-30-2019, 05:04 PM

solidaxel · 01-31-2019, 10:10 AM

Quote:

Originally Posted by sweetk30

Yea me too !

solidaxel · 01-31-2019, 10:15 AM

Drive by CABLE only !

BR3W CITY · 01-31-2019, 12:43 PM

Its a blue/red harness so its set for the early stuff on 411 pcms. Thats probably why its got the "DBC only" note. Wiring and connector need to be modded to work on the blue/green (late 02+) ECM's but will lack DBW control. If your using a cable setup, then be aware that some of the later GenIII Ecm's lacked IAC control to to DBC.

I may also be missing it, but in the pics it appears there is only a single ISS on the harness, meaning its setup for a 4l60e.

MFG doesn't show wire type either. TXL? GXL? Non rated? You have to be cautious with longevity of cheap wiring. Ask anyone who's bought an imported trailer lol.

sweetk30 · 01-31-2019, 01:03 PM

look at the other harnesses below . they have DBW stuff .

Rabid Anti-Dentite · 01-31-2019, 10:01 PM

I ordered for an LM7 with drive by cable and a 4l60e. My old harness was so brittle that taking the chance on this is worth it to me. Worse case is I have to buy a new year or two.

BR3W CITY · 02-01-2019, 10:47 AM

Let us know how it looks when you get it. Its not that we don't want it to work; its that we've chased enough crazy wiring for a lifetime lol.

Rabid Anti-Dentite · 02-01-2019, 04:50 PM

Quote:

Originally Posted by BR3W CITY

Let us know how it looks when you get it. Its not that we don't want it to work; its that we've chased enough crazy wiring for a lifetime lol.

Haha will do!

**michael bustamante** · 02-18-2019, 09:13 PM

Any news on this?

Rabid Anti-Dentite · 02-18-2019, 10:42 PM

It shipped on Saturday from Hong Kong via DHL. So once it arrives I will upload some pics.
Posted via Mobile Device

**michael bustamante** · 02-19-2019, 11:58 AM

sounds good. ill be waiting!

TooTall · 02-19-2019, 12:48 PM

I ordered a DBW harness from them and attempted to get it with the EV6 (08 and up)injector plugs.

It showed up with the wrong plugs, (99-06) and poor solder connections.
They ended up sending me the correct pig tails, but the harness still does not work.

I've started pulling off all of the loom to do some trouble shooting.

You're better off modding an original if you want to be cheap

dfarr67 · 02-19-2019, 03:13 PM

So the guys who received said harness- I have a project in the works- 1989 K1500 with 24X LS conversion set up on SBC that has been waiting. I do have a 1999 truck harness or...pick this harness up. Or does anybody have a lead on a repin service?

RedRider · 02-19-2019, 11:40 PM

I emailed them with my engine specs, interested to see what they come up with. They say most aftermarket sheet metal comes from only 1-2 places overseas so maybe the same holds true for aftermarket wiring harnesses?

RedRider · 02-20-2019, 05:05 PM

Quote:

Originally Posted by RedRider

I emailed them with my engine specs, interested to see what they come up with. They say most aftermarket sheet metal comes from only 1-2 places overseas so maybe the same holds true for aftermarket wiring harnesses?

Super fast reply, very knowledgeable and clearly understood my specs (i.e., 24x, DBW, EV6, etc.). Quoted me $180 plus shipping. Too good to be true? Maybe I’ll wait and see what the OP comes up with.

**michael bustamante** · 02-21-2019, 04:21 PM

Quote:

Originally Posted by RedRider

Super fast reply, very knowledgeable and clearly understood my specs (i.e., 24x, DBW, EV6, etc.). Quoted me $180 plus shipping. Too good to be true? Maybe I’ll wait and see what the OP comes up with.

dang. for this price I might try them too. you have a link so I can see what they come up with for me?

RedRider · 02-21-2019, 05:12 PM

Quote:

Originally Posted by michael bustamante

dang. for this price I might try them too. you have a link so I can see what they come up with for me?

Link is in first post.

Rabid Anti-Dentite · 02-25-2019, 06:01 PM

So I got the harness in today, and I am happy with it so far. It will be about a month of so before I am ready to test the harness, but here are some pictures.

Rabid Anti-Dentite · 02-25-2019, 06:02 PM

The instructions are better than what I have gotten in the past when sending my harness out to get modified. I will post some pictures of the instructions here soon.

RedRider · 02-25-2019, 06:19 PM

Thanks for the update, looks clean. What is your take on connector quality? Keep us posted.

**mongocanfly** · 02-25-2019, 06:23 PM

That pic of your instruction sheet looks alot like the front of the PSI book....

**michael bustamante** · 02-25-2019, 07:10 PM

yeah it does... I sent a request to the link on Friday, lets see if they msg back

Rabid Anti-Dentite · 02-25-2019, 08:48 PM

Quote:

Originally Posted by mongocanfly

That pic of your instruction sheet looks alot like the front of the PSI book....

Yeah all the add on part numbers start with PSI...I have not looked into that company, but this appears to be where they get their harnesses.

dfarr67 · 02-25-2019, 09:06 PM

Any way you cab tell if they are using the proper wire type?

01-30-2019, 04:38 PM	#1
Rabid Anti-Dentite Registered User Join Date: Mar 2016 Location: Fort Worth, TX Posts: 58	New LS Standalone Harness Not sure if this was allowed, and I do not endorse nor work for these sellers, but I was looking on eBay for a 5.3 standalone harness or rework, and all of the new harnesses look exactly the same, and sell for $349 + or so. Figuring that they all came from China, I hoped on Alibaba and did a little searching and chatting. Turns out there is only one manufacture in China that makes this harness, and they sell to everyone that carries it. When I asked about pricing, she told me $268 shipped for 1, or if I order 10 or more, the price goes to $240. She did say that she can customize the harness to any spec I wanted, whether that was added or removing sensors or trans and lengthen/shorten the ECM leads. So I ordered one for $268, figuring I will save about $100 vs eBay. I will do a review on it when I receive it. Anyways, here is a link if anyone is interested: https://www.alibaba.com/product-deta...52c38538gfq5ON

01-30-2019, 05:04 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: New LS Standalone Harness __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

01-31-2019, 10:15 AM	#4
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: New LS Standalone Harness Drive by CABLE only ! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

01-31-2019, 12:43 PM	#5
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: New LS Standalone Harness Its a blue/red harness so its set for the early stuff on 411 pcms. Thats probably why its got the "DBC only" note. Wiring and connector need to be modded to work on the blue/green (late 02+) ECM's but will lack DBW control. If your using a cable setup, then be aware that some of the later GenIII Ecm's lacked IAC control to to DBC. I may also be missing it, but in the pics it appears there is only a single ISS on the harness, meaning its setup for a 4l60e. MFG doesn't show wire type either. TXL? GXL? Non rated? You have to be cautious with longevity of cheap wiring. Ask anyone who's bought an imported trailer lol. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

01-31-2019, 01:03 PM	#6
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: New LS Standalone Harness look at the other harnesses below . they have DBW stuff . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

01-31-2019, 10:01 PM	#7
Rabid Anti-Dentite Registered User Join Date: Mar 2016 Location: Fort Worth, TX Posts: 58	Re: New LS Standalone Harness I ordered for an LM7 with drive by cable and a 4l60e. My old harness was so brittle that taking the chance on this is worth it to me. Worse case is I have to buy a new year or two.

02-01-2019, 10:47 AM	#8
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: New LS Standalone Harness Let us know how it looks when you get it. Its not that we don't want it to work; its that we've chased enough crazy wiring for a lifetime lol. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

02-18-2019, 09:13 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: New LS Standalone Harness Any news on this? __________________ 1967custom

02-18-2019, 10:42 PM	#11
Rabid Anti-Dentite Registered User Join Date: Mar 2016 Location: Fort Worth, TX Posts: 58	Re: New LS Standalone Harness It shipped on Saturday from Hong Kong via DHL. So once it arrives I will upload some pics. Posted via Mobile Device

02-19-2019, 11:58 AM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: New LS Standalone Harness sounds good. ill be waiting! __________________ 1967custom

02-19-2019, 12:48 PM	#13
TooTall Registered User Join Date: Mar 2009 Location: League City,TX Posts: 66	Re: New LS Standalone Harness I ordered a DBW harness from them and attempted to get it with the EV6 (08 and up)injector plugs. It showed up with the wrong plugs, (99-06) and poor solder connections. They ended up sending me the correct pig tails, but the harness still does not work. I've started pulling off all of the loom to do some trouble shooting. You're better off modding an original if you want to be cheap __________________ 1973 K5, full vert, 6" BDS lift, 35 Mickey T MTs 1984 K10, 8" lift on 35s 2004 3/4 4wd, 33s Toyo Mts, Long Tube headers, 3K multidisk 80e, tons of miles 2011 Yukon XL \| Bone stock 2013 Audi Q5

02-19-2019, 03:13 PM	#14
dfarr67 Registered User Join Date: Aug 2011 Location: Yellowknife, NWT Posts: 39	Re: New LS Standalone Harness So the guys who received said harness- I have a project in the works- 1989 K1500 with 24X LS conversion set up on SBC that has been waiting. I do have a 1999 truck harness or...pick this harness up. Or does anybody have a lead on a repin service?

02-19-2019, 11:40 PM	#15
RedRider Registered User Join Date: Jan 2016 Location: Poway, CA Posts: 356	Re: New LS Standalone Harness I emailed them with my engine specs, interested to see what they come up with. They say most aftermarket sheet metal comes from only 1-2 places overseas so maybe the same holds true for aftermarket wiring harnesses? __________________ 1970 C-10 "Old Yeller"

02-25-2019, 06:01 PM	#19
Rabid Anti-Dentite Registered User Join Date: Mar 2016 Location: Fort Worth, TX Posts: 58	Re: New LS Standalone Harness So I got the harness in today, and I am happy with it so far. It will be about a month of so before I am ready to test the harness, but here are some pictures.

02-25-2019, 06:02 PM	#20
Rabid Anti-Dentite Registered User Join Date: Mar 2016 Location: Fort Worth, TX Posts: 58	Re: New LS Standalone Harness The instructions are better than what I have gotten in the past when sending my harness out to get modified. I will post some pictures of the instructions here soon.



Register or Log In To remove these advertisements.

02-25-2019, 06:19 PM	#21
RedRider Registered User Join Date: Jan 2016 Location: Poway, CA Posts: 356	Re: New LS Standalone Harness Thanks for the update, looks clean. What is your take on connector quality? Keep us posted. __________________ 1970 C-10 "Old Yeller"

02-25-2019, 06:23 PM	#22
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,673	Re: New LS Standalone Harness That pic of your instruction sheet looks alot like the front of the PSI book.... Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

02-25-2019, 07:10 PM	#23
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: New LS Standalone Harness yeah it does... I sent a request to the link on Friday, lets see if they msg back __________________ 1967custom

02-25-2019, 09:06 PM	#25
dfarr67 Registered User Join Date: Aug 2011 Location: Yellowknife, NWT Posts: 39	Re: New LS Standalone Harness Any way you cab tell if they are using the proper wire type?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.