![]() |
![]() |
#1 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
C10 Parts
*UPDATE*
So far, the only thing gone is the air cleaner, everything else is still available and negotiable. *Price adjustments... Thanks. I don't know the history of the parts other than the fella wanted them out of his yard. His son started a project and then moved and left these behind. I've got what I might be able to use and the list below is the rest. '71-72 grille in what looks like good condition. The RH/LH brackets are attached but no other components. Has a few dings on the front and edges are scratched up here and there with some ugliness on the back side in the middle, looks like it was straightened out for some reason. $150 plus shipping Cowl for '68-72, in good condition, a little surface rust in spots, should not require any metal replacement anywhere. $125 plus shipping Grille/rad support for '69-72, has some rust at the bottom but no holes or weak metal from what I can tell. Cleaned up with a wire wheel should take care of it. $75 local I have both fenders for a ’71, in decent shape, in need of some metal replacement at the bottom, there’s a couple holes. Otherwise, fenders are in pretty good condition, with emblems, trim and side markers. $50 ea local I’ve got the left side door for a ‘71, pretty solid but will need some rust repair on the seams at the bottom and has a few dings/dents there too. No door panel $50 local Shipping costs I think I can ship the grille and cowl but not sure I want to mess with the other parts, too big, bulky and heavy. All prices are a bit negotiable and plus shipping for the ones indicated. I can get some better pics if you’ve got interest. Thanks.
__________________
'68 GMC 3/4 Ton 350, 700R4 Last edited by Droff; 03-13-2019 at 06:39 PM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
A few more pics..
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
I've also got an in cab gas tank with the bottom flange rusted pretty bad, will need replaced if possible. But otherwise it looks to be in really good condition, no idea on sending unit. $50 local
A pair of inner fender wells, in need of some metal work, looks like the battery got the best of one of them. $40 ea local
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Jun 2017
Location: burlington north carolina
Posts: 1,030
|
Re: C10 Parts
need a photo of air cleaner & spacer thanks
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
Pics attached
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,848
|
Re: C10 Parts
interested in the fan shroud. shipping to NM 87108? is there any cracks or missing pieces?
__________________
1967custom Last edited by michael bustamante; 02-27-2019 at 12:05 PM. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
I'll get the info, I'm not a shipper so it likely won't be a quick process.
From what I can see, no cracks and it's all there. The mounting tabs are good and the holes haven't been made any larger.
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Sep 2007
Location: Albuquerque NM
Posts: 7,848
|
Re: C10 Parts
sounds good to me bud. ill wait
__________________
1967custom |
![]() |
![]() |
![]() |
#9 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,493
|
Re: C10 Parts
-
Your core/radiator support is '69-'72.... '67 and '68 are different. LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
Thanks for pointing that out, post edited...
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
Bumped
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Oct 2013
Location: East, TN
Posts: 3
|
Re: C10 Parts
Please send me a price including shipping for the grille to 37642. Thanks.
|
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
I'll get a number....
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#14 |
DND Trucks
![]() Join Date: Dec 1999
Location: NW Indiana
Posts: 2,382
|
Re: C10 Parts
How much for the air cleaner shipped to 46360? Lmk thanks Dave..
|
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Dec 2013
Location: Gods country East,Tn
Posts: 8,545
|
Re: C10 Parts
Put me next in line on air cleaner to 37938
![]()
__________________
![]() 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
Everybody's in line, just need a trip to whatever shipper I'm going to use.
I won't know anything until Thursday at the earliest, work is in the way. Any shipping recommendations other than the usual UPS/FedEx guys?
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#17 |
DND Trucks
![]() Join Date: Dec 1999
Location: NW Indiana
Posts: 2,382
|
Re: C10 Parts
Fed-Ex ground works for me
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jul 2012
Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!!
Posts: 537
|
Re: C10 Parts
what color it the sheetmetal? and can you tell if its original paint?? interested in the door.
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jul 2010
Location: howell mi
Posts: 248
|
Re: C10 Parts
Intrested in tge fenders. Can you ship them via fastenal
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
Paint looks original to me, I'd say black or a dark navy maybe.
I don't know where the closest fastenal is around here, never tried that route so I'll need to look into it. FYI, don't get too fired up guys, I'll be out of pocket for the next 3-4 days. Thanks.
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jul 2012
Location: Marshall, NC....heart of the Appalachians.....aka, Gods country!!
Posts: 537
|
Re: C10 Parts
If its black, I'm definitely interested. Could you post a few more pics of the bottom corners and inside?? if you could check out shipping options I would appreciate it.
thanks |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jul 2018
Location: Plainfield IL
Posts: 36
|
Re: C10 Parts
Is that a 8 lug truck rim? For sale? Needing one for a spare tire for my k20
|
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Dec 2016
Location: OKC
Posts: 130
|
Re: C10 Parts
PMs with shipping estimates were sent to the gents asking about the shroud and air cleaner. I haven't gotten to the grille yet, still working on that.
Concerning the fenders and the door, I'd rather keep that local as first mentioned, crating or palletizing is not in my wheelhouse. Sent you a PM Towbar... It is an 8 lug GMC truck and that is my spare in the bed, sorry, not for sale. You fellas don't miss much, good thing the wife wasn't in a pic.
__________________
'68 GMC 3/4 Ton 350, 700R4 |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Oct 2013
Location: East, TN
Posts: 3
|
Re: C10 Parts
|
![]() |
![]() |
![]() |
#25 |
DND Trucks
![]() Join Date: Dec 1999
Location: NW Indiana
Posts: 2,382
|
Re: C10 Parts
I'll take the air cleaner, PM sent.
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|