03-10-2019, 02:33 PM | #1 |
Registered User
Join Date: Mar 2019
Location: Kernersville, NC
Posts: 4
|
Evaporator box repair
Hi. I'm new to the site. I'm trying to repair the evaporator box on my '71 Cheyenne. The metal panel on the back of the box is rusted and I need to replace it. The box itself is good, so I was hoping to repair it instead of buying a new box. If anyone knows where I could find one I would appreciate it. Thanks. Tommy
|
03-11-2019, 10:54 AM | #2 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Evaporator box repair
Welcome, the metal piece is not replicated to my knowledge. You will need to source a used one. If you become a supporting member you can place a "Want to Buy" on the parts forum. IMO, this is your best bet unless you can find one in a bone yard.
BTW, we all like picks of trucks, post yours up if you can. |
03-11-2019, 11:21 AM | #3 |
Registered User
Join Date: May 2011
Location: Reno Nevada
Posts: 382
|
Re: Evaporator box repair
Your best bet is to find another box. Way cheaper than trying to repair that one.
Vic |
11-11-2021, 10:18 PM | #4 |
Registered User
Join Date: Aug 2002
Location: Fountain, CO
Posts: 51
|
Re: Evaporator box repair
TC71C10, any luck? I'm looking for the same thing.
__________________
1972 C-10 Custom Deluxe 468 BBC w/ TCI 400 Trans |
11-11-2021, 11:13 PM | #5 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,787
|
Re: Evaporator box repair
Can you post pictures of how bad yours is?
|
11-12-2021, 12:23 AM | #6 | |
Senior Member
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,269
|
Re: Evaporator box repair
Quote:
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
|
11-12-2021, 12:59 AM | #7 |
Registered User
Join Date: May 2018
Location: Prattville, AL
Posts: 611
|
Re: Evaporator box repair
If you post some pics I will compare them to one I have out of a '67.
__________________
-------------------------------------------------------- 1967 C10 "Snowball" (Currently in a thousand pieces down from a bazillion) 1989 Toyota DLX pickup "The Hulk" |
11-12-2021, 07:47 PM | #8 |
Registered User
Join Date: Aug 2002
Location: Fountain, CO
Posts: 51
|
Re: Evaporator box repair
Attached pics...Door doesn't shut all the way, maybe from rust? And there is a hole and lots of rust in the metal piece.
__________________
1972 C-10 Custom Deluxe 468 BBC w/ TCI 400 Trans |
11-12-2021, 08:01 PM | #9 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,787
|
Re: Evaporator box repair
You could probably restore that if you wanted to. It matters how much of it is surface rust and how much is actually rusted through. On mine I had some parts of it rusted through and I fixed it. I recommend give my thread a read and see if it helps you. https://67-72chevytrucks.com/vboard/...06#post8704506
|
11-12-2021, 08:50 PM | #10 |
Registered User
Join Date: Aug 2002
Location: Fountain, CO
Posts: 51
|
Re: Evaporator box repair
That's awesome! I think it will help alot! Thank you very much! I think I'll drill out the rivets this weekend and see what I can fix.
__________________
1972 C-10 Custom Deluxe 468 BBC w/ TCI 400 Trans |
11-12-2021, 10:54 PM | #11 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,787
|
Re: Evaporator box repair
Yes, good. You'll know more about it once you get it apart and perhaps use a wire wheel on the rusty areas. If it's really bad rust but only in a couple of places, clean it up, patch, and paint it. I decided to go with small stainless steel screws and nyloc nuts to put mine back together. The short rubber hose that goes from the fan motor to the housing to help cool the motor is not reproduced and mine was cracked. I used superglue to fix the crack and smoothed on a coating of black RTV over the crack and it came out pretty great.
|
11-14-2021, 09:40 PM | #12 |
Registered User
Join Date: Aug 2002
Location: Fountain, CO
Posts: 51
|
Re: Evaporator box repair
So I'm working on fixing it...
__________________
1972 C-10 Custom Deluxe 468 BBC w/ TCI 400 Trans |
11-14-2021, 11:07 PM | #13 |
Senior Member
Join Date: Apr 2016
Location: Cypress, TX
Posts: 3,787
|
Re: Evaporator box repair
Great! That's progress right there.
|
11-16-2021, 07:46 PM | #14 |
Registered User
Join Date: Aug 2002
Location: Fountain, CO
Posts: 51
|
Re: Evaporator box repair
Thanks! I think it's coming out alright. Should be good for another 50 yrs.
__________________
1972 C-10 Custom Deluxe 468 BBC w/ TCI 400 Trans |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|