heater blower - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jayrau · 11-26-2003, 03:49 PM

has anyone out there ever put a stronger fan/heater blower in their chevys? I own a '72 shory with a 350 engine, and I barely get enough air going through the defrosters or heater to do the job. What works for anybody out there?

mikej71 · 11-26-2003, 04:03 PM

I don't know about a stronger blower, but are you sure you're getting all of the speed out of your current one? Mine didn't blow very hard, but I found that the cable on my fan switch needed adjusting. See if you can manualy move the cable to make it blow at the highest setting. After I got my switch to actually go to the highest setting, my non-ac heater blows pretty hard. I also found that my defroster hoses were loose and full of holes.

Mike

mikej71 · 11-26-2003, 04:06 PM

After reading your post, I guess that I was assuming that you had a non-a/c truck. If you have a/c, then disregard my previous rambling.

Mike

jayrau · 11-26-2003, 04:14 PM

thanks for the reply. I do have an adjustment problem I should fix before I do anything else.

jimfulco · 11-26-2003, 11:26 PM

Sure there's not something blocking the ductwork? Leaves or critter nests, etc.

gonebad2 · 11-26-2003, 11:59 PM

Could have some air leaks??? Maybe in the heater box a gasket is torn or missing. Just a thought.

Cat Fuzz · 11-27-2003, 12:35 AM

Maybe some of the diverter doors in the heater system aren't opening/closing properly and diverting the airflow somewhere else.

11-26-2003, 03:49 PM	#1
jayrau Registered User Join Date: Jan 2000 Location: White Salmon, WA Posts: 33	heater blower has anyone out there ever put a stronger fan/heater blower in their chevys? I own a '72 shory with a 350 engine, and I barely get enough air going through the defrosters or heater to do the job. What works for anybody out there?

11-26-2003, 04:03 PM	#2
mikej71 Unregistered User Join Date: Dec 2001 Location: Houston, TX USA Posts: 538	I don't know about a stronger blower, but are you sure you're getting all of the speed out of your current one? Mine didn't blow very hard, but I found that the cable on my fan switch needed adjusting. See if you can manualy move the cable to make it blow at the highest setting. After I got my switch to actually go to the highest setting, my non-ac heater blows pretty hard. I also found that my defroster hoses were loose and full of holes. Mike __________________ 71 SWB Stepside SB400/TH350

11-26-2003, 04:06 PM	#3
mikej71 Unregistered User Join Date: Dec 2001 Location: Houston, TX USA Posts: 538	After reading your post, I guess that I was assuming that you had a non-a/c truck. If you have a/c, then disregard my previous rambling. Mike __________________ 71 SWB Stepside SB400/TH350

11-26-2003, 11:59 PM	#6
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Could have some air leaks??? Maybe in the heater box a gasket is torn or missing. Just a thought. __________________ Your Bought And Sold....I Got Your Soul!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-26-2003, 04:14 PM	#4
jayrau Registered User Join Date: Jan 2000 Location: White Salmon, WA Posts: 33	thanks for the reply. I do have an adjustment problem I should fix before I do anything else.

11-26-2003, 11:26 PM	#5
jimfulco Registered User Join Date: May 2003 Location: Shreveport LA Posts: 3,170	Sure there's not something blocking the ductwork? Leaves or critter nests, etc.

11-27-2003, 12:35 AM	#7
Cat Fuzz My son, my joy. Join Date: Sep 2003 Location: Spokane WA Posts: 463	Maybe some of the diverter doors in the heater system aren't opening/closing properly and diverting the airflow somewhere else.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.