|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-18-2019, 11:15 PM
|
#1 |
|
Registered User
Join Date: Jul 2015
Location: Whittier, CA
Posts: 851
|
Fuel line fitting problem
So I got a new fuel line from truck shop and I have an issue.
The adapter I have already that goes into a nipple for a hose, isn’t the same size for the fuel line, neither is the hole for the carburetor. The brass fitting for the fuel line is too big. I believe the thread size is 5/8 24 thread.(probably wrong) And I believe the male adapter side that goes into the carb is 7/16 24. AnywAys I went to auto zone, Orilleys, Napa and Home Depot and cant find the adapter. Does anyone know where I could find the adapter or the thread sizes? I have a rebuilt Rochester b, Last edited by Isaiah92260; 05-19-2019 at 01:01 AM. |
|
|
|
05-20-2019, 12:50 PM
|
#2 |
|
Registered User
Join Date: Jan 2010
Location: Regina, SK
Posts: 809
|
Re: Fuel line fitting problem
If an adapter is required, get a TPI measuring tool and find out what sizes and TPI you need, Dorman makes a ton of adapters.
Maybe you just need 5/16 fuel line instead of 3/8? |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
