![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
started building my 441 heads. tips 4 ya,ll
today I started building my 441 heads and thought I,d share a couple tips I,ve learned over the years.
1. when going to screw in rocker studs and guide plates.. YOU MUST DRILL OUT THE FACTORY OVAL SHAPED HOLES FOR PUSHRODS TO 7/16. USE A NEW DRILL BIT WITH A DRILL PRESS...............AND USE CUTTING OIL GENEROUSLY........ 2. WHEN REMOVING PRESS IN ROCKER ARM STUDS........... HEAT STUD BOSS BEFORE YOU START THE PULLING PROCESS. MORE TO COME BOB
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: started building my 441 heads. tips 4 ya,ll
I'm in, let's see your progress. I love a good rebuild with all the juicy details.
|
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
got pushrod holes drilled out to 7/16 also got all rocker arm studs pulled and all valves n hardware removed. now off to machine shop with em.
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
well finally got to work on my 441 heads, I found out I have the desired Canadian heads. yee haw............all the nhra super stockers want this head because it flows 10-15 % more than the U.S. 441 HEAD. on with the grinding
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: started building my 441 heads. tips 4 ya,ll
Did not know about those differences. I have a set of 441 heads on my vehicle and would love to see some casting marks that show the id marks.
I can say this, they aint super fast but they have been very durable. |
![]() |
![]() |
![]() |
#6 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
Comming
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#7 |
Senior Member
![]() Join Date: Aug 2009
Location: Calgary,AB
Posts: 323
|
Re: started building my 441 heads. tips 4 ya,ll
x2 would like to see the casting marks
__________________
72 Chev Cheyenne Super SB 4x4 350,4spd,buckets, tilt,tach,am-fm,extreme tow hooks,Canadian Model Production 1 of 52 SOLD 70 Chev CST, 350 auto, PS, PB, AC, tach |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2003
Location: Mtn. Home, Idaho
Posts: 906
|
Re: started building my 441 heads. tips 4 ya,ll
in on this
|
![]() |
![]() |
![]() |
#9 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,433
|
Re: started building my 441 heads. tips 4 ya,ll
There were two designs of Fuel Injection heads- the ones with 1.94" intake and 1.50" exhaust valves, and the ones with 2.02" intake and 1.60" exhaust valves. On the 2.02/1.60 heads, the valves were extremely close together. These tended to crack in the area between the valves.
I'm guessing you have the 2.02/1.60 heads, Bob?
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
1st thing 441,s arent fuelie heads.............. yes I,am going to large valves. Canada heads have 441 cast into them on bottom side length wise on int. port, us heads have 441 cast in width wise. there heavy castings. people say go modern alum heads but what they overlook is all the cheap import heads need work b4 install so true cost is a lot higher. nothing is better imo than gm for our use. lastly when folk say closed chamber is better by the time you open chamber up so int valve can breath its not 64cc chamber anymore. go 76cc and use .125 dome pistons to get 10-1, fine tune with deck height and gasket thickness. IMO I,AM NOT BUILDING A RACE ENG. JUST A REAL 355 / 350HP ENG.
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#11 |
Who Changed This?
![]() Join Date: Jan 2013
Location: Simi Valley, CA
Posts: 10,433
|
Re: started building my 441 heads. tips 4 ya,ll
Oh, OK.
__________________
~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA |
![]() |
![]() |
![]() |
#12 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
I have some real nice fuelie heads 4 sale off 327 / 300 hp engines
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#13 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
I,ll have some pic,s tonight 4 yall
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#14 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
Pic,s. Of 441 heads made in u.s.a. Note how the 441 is cast into the head cross wise on int. Port bottom. THIS HEAD HAPPENS TO ALSO BE A " X " CASTING WHICH I NEED 1 TO MAKE A SET IF ANYBODY HAS 1 FOR SALE REASONABLE, CORE IS FINE IN FACT PREFERED..
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#15 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
Got my dart s/r head side by side WITH my 441,S today.......boy what a difference....... The dart head has pueney intake ports when compared....i dont see how dart sells these.................
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
Pic,s comming
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,337
|
Re: started building my 441 heads. tips 4 ya,ll
If your new heads are the 170cc intake port volume S/R heads, THOSE are awesome heads. They actually have more port volume than your 441's do. I have a set I plan to use on a SBC 400 some day.
Remember when looking at ports, it's not the size that's most important, it's the shape!!! I seldom hear on this board about them, it's all about Vortec's or aftermarket stuff. The 441's are great heads, the S/R's are even better!!! |
![]() |
![]() |
![]() |
#18 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
a little hose cant flow as much as a large hose. I had these on a 383 and wasn't a bit impressed JMO SPECS TO COME. IMO IF YOUR INTO PERF AND WANT DART GET PRO 1,S
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: started building my 441 heads. tips 4 ya,ll
my buddy took some pic,s. 4 me but only 1 was barely any good. I tried guys. I,ll get more but it will be when heads are assembled.......
bob
__________________
I BELIEVE IN JOHN 3:16 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|