Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-08-2019, 01:26 PM | #1 |
Registered User
Join Date: Sep 2015
Location: Lake Placid florida
Posts: 599
|
Power steering question
My old C10 has been pressed into service due to my DD being in the shop. After driving 1/2 hour or so in Miami heat (95 today), I noticed that the powersteering was making a little noise - kinda like when low on fluid. It's not real loud, you almost have to listen for it. It's also a tiny bit harder to turn. I've not noticed this before in light the service she usually gets.
It's an add on power steering unit from a PO. Fluid is good, belt is not slipping. I'm at work now, curious if it does the same when it's cooled down tonite when I leave. Couple of terrible pics attached that might help in id. These are old pics from a thread when I was putting the engine in, so ignore loose wires, etc Any ideas, should I be worried? Thanx
__________________
1967 C-10 4-speed, 350v8 Last edited by dave`12; 06-08-2019 at 01:39 PM. |
06-08-2019, 06:05 PM | #2 |
Registered User
Join Date: Sep 2015
Location: Lake Placid florida
Posts: 599
|
Re: Power steering question
Truck is cold now. Started it, power steering seemed normal. Good, I guess, but puzzling.
__________________
1967 C-10 4-speed, 350v8 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|