6 lug disc to 5 lug disc conversion What wheel ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kens65fb · 06-14-2019, 05:41 PM

Previous owner did a 6 lug disc conversion a few years ago.
I'm about to convert the 6 lug rotors to to 5 lug rotors.
I'm in a pinch and I need to find (2) 5 x 5 front wheels.
I can't find any 5 lug c-10 wheels locally, can I just pick up 2 later model wheels that will fit, (what year) ?? until I convert the rear to 5 lug, and buy a nice set of wheels & tires next year.

kens65fb · 06-14-2019, 06:04 PM

Will these work in the front, they are from Summit ??

Steel wheel,
15 in. x 7 in.

5 x 5 in. Bolt Circle,

4.25 in. Backspace

Offset: +6.00mm

Center Bore Diameter (in):
3.217 in.

Center Bore Diameter (mm):
81.70mm

**Clyde65** · 06-14-2019, 08:48 PM

As long as they are 5on5 or 5 on 127

**jayoldschool** · 06-14-2019, 09:28 PM

If you want dirt cheap, and readily available, all full size Cadillac 1996 down are 5x5. So are all 91-96 B bodies (Caprice/Roadmaster/Custom Cruiser/Impala SS). So are all B body wagons from 77-up. So are all 71-76 GM full size. So are 5 lug GM pickups. So are 5 lug Astro and Safari. And... mid 70s Ford full size. And probably more that I am forgetting.

**Warrens69GMC** · 06-14-2019, 09:33 PM

try looking at www.car-part.com

06-14-2019, 05:41 PM	#1
kens65fb Registered User Join Date: Dec 2018 Location: Dallas, PA Posts: 551	6 lug disc to 5 lug disc conversion What wheel ?? Previous owner did a 6 lug disc conversion a few years ago. I'm about to convert the 6 lug rotors to to 5 lug rotors. I'm in a pinch and I need to find (2) 5 x 5 front wheels. I can't find any 5 lug c-10 wheels locally, can I just pick up 2 later model wheels that will fit, (what year) ?? until I convert the rear to 5 lug, and buy a nice set of wheels & tires next year.

06-14-2019, 06:04 PM	#2
kens65fb Registered User Join Date: Dec 2018 Location: Dallas, PA Posts: 551	Re: 6 lug disc to 5 lug disc conversion What wheel ?? Will these work in the front, they are from Summit ?? Steel wheel, 15 in. x 7 in. 5 x 5 in. Bolt Circle, 4.25 in. Backspace Offset: +6.00mm Center Bore Diameter (in): 3.217 in. Center Bore Diameter (mm): 81.70mm Attached Images Last edited by kens65fb; 06-14-2019 at 06:13 PM.

06-14-2019, 08:48 PM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: 6 lug disc to 5 lug disc conversion What wheel ?? As long as they are 5on5 or 5 on 127 __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

06-14-2019, 09:28 PM	#4
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: 6 lug disc to 5 lug disc conversion What wheel ?? If you want dirt cheap, and readily available, all full size Cadillac 1996 down are 5x5. So are all 91-96 B bodies (Caprice/Roadmaster/Custom Cruiser/Impala SS). So are all B body wagons from 77-up. So are all 71-76 GM full size. So are 5 lug GM pickups. So are 5 lug Astro and Safari. And... mid 70s Ford full size. And probably more that I am forgetting.

06-14-2019, 09:33 PM	#5
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,621	Re: 6 lug disc to 5 lug disc conversion What wheel ?? try looking at www.car-part.com __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.