Other wtb: dg4 mirrors , clearance lights ,c30 etc

[19714x4]

i am looking for a pair of dg4 mirrors for my 69 Chevy custom 30 flat deck , here are some ref photos where they mount , also looking for hockey puck style clearance light lenses , factory antenna. thanks, Steve

[too much stuff]

I have a set of NOS lenses for $150 plus shipping.

[19714x4]

Originally Posted by too much stuff

I have a set of NOS lenses for $150 plus shipping.

pm sent

[Jeff's bowtie's]

I have a set of dg4 mirrors off a 69 Chevy that are in chrome and driver condition I can post pics later today if interested thanks

[19714x4]

Originally Posted by Jeff's bowtie's

I have a set of dg4 mirrors off a 69 Chevy that are in chrome and driver condition I can post pics later today if interested thanks

very interested!

[carryall]

I have this set if interested

[67swb72klb]

The DG4's were 72 only and have shorter arms than what looks like was on your truck..

[Jeff's bowtie's]

Here’s some pics of the mirrors the elbows are rusty but the stainless arms are straight and the glass is not cracked $160.00 shipped

[19714x4]

Originally Posted by Jeff's bowtie's

Here’s some pics of the mirrors the elbows are rusty but the stainless arms are straight and the glass is not cracked $160.00 shipped

do you have photo of them on the truck, that would help determine length....my original 69 build sheet shows dg4 option code....hmmmm

[Stocker]

Someone correct me if I'm wrong -- DG4 mirrors were available on '67-'71 trucks with the upper arm shown in Jeff's pics (post #8). 1972 trucks also had DG4s but the upper arm was different, and lower mounting points *may* have been different than on '67-'71s.

Here's a pic of a '72 DG4 for comparison to Jeff's mirrors. The lowers are shorter also. Plenty more pics on the site if you do a search.

[Stocker]

My K20 is a '72 but I prefer the look of the '67-'71 DG4s and I found a set. When the truck eventually gets paroled from paint prison, that's what it will be wearing.
The following pic is not my truck, but the mirrors are the same and the medium olive paint and white roof is the same.

[67swb72klb]

My bad I thought all DG4 mirrors were the short arms..

[19714x4]

Originally Posted by Stocker

My K20 is a '72 but I prefer the look of the '67-'71 DG4s and I found a set. When the truck eventually gets paroled from paint prison, that's what it will be wearing.
The following pic is not my truck, but the mirrors are the same and the medium olive paint and white roof is the same.

that looks like my size, tomorrow morning i will post the dimensions of the hole spacing

[Stocker]

Originally Posted by 67swb72klb

My bad I thought all DG4 mirrors were the short arms..

No worries, we all learn things on this board, which is part of what makes it so great.

I knew nothing about DG4s until last year when I did a ton of research trying to decide which mirrors I wanted.

[19714x4]

Originally Posted by Stocker

My K20 is a '72 but I prefer the look of the '67-'71 DG4s and I found a set. When the truck eventually gets paroled from paint prison, that's what it will be wearing.
The following pic is not my truck, but the mirrors are the same and the medium olive paint and white roof is the same.

here is the actual spacing of the bolt holes in the door

[mrtoni]

I would sell these mirrors for $90. Are these what you need?

[19714x4]

Originally Posted by mrtoni

I would sell these mirrors for $90. Are these what you need?

one looks correct(stainless) , the other (rusty/painted) looks aftermarket.....

[mrtoni]

Shoot. It was painted med bronze along with door. Was gonna strip down to hopefully stainless but screw it if it’s not gm

[19714x4]

Originally Posted by mrtoni

Shoot. It was painted med bronze along with door. Was gonna strip down to hopefully stainless but screw it if it’s not gm

..might be just the head was replaced? , better close up photos would help, is it painted over stainless?

[mrtoni]

So yes it was painted with door. I just bought a collection of doors and fenders because I really needed about 3 things in his collection but am gonna resell everything else. Will post a better pic and then start my for sale threads. Matt in nevada

[19714x4]

Originally Posted by mrtoni

So yes it was painted with door. I just bought a collection of doors and fenders because I really needed about 3 things in his collection but am gonna resell everything else. Will post a better pic and then start my for sale threads. Matt in nevada

ok, send a closer photo of them and check measurements as i posted

[Jeff's bowtie's]

Mine are 13” apart as well

[19714x4]

Originally Posted by Jeff's bowtie's

Mine are 13” apart as well

perfect!

[Stocker]

If you need new elbows to replace rusted ones, I found elbows at NAPA, p/n 97869. They are 4.50" x 3.75" which I believe is same as original. I didn't have the correct acorn nuts so rather than using studs, I used the stainless bolts and fiber washers that came with the elbows. Good enough for a working truck, plenty of other things on my rig are not 100% correct.

[19714x4]

Originally Posted by Stocker

If you need new elbows to replace rusted ones, I found elbows at NAPA, p/n 97869. They are 4.50" x 3.75" which I believe is same as original. I didn't have the correct acorn nuts so rather than using studs, I used the stainless bolts and fiber washers that came with the elbows. Good enough for a working truck, plenty of other things on my rig are not 100% correct.

thanks for the tips :-)