47-55.1 Turbo 350 swap to 200 4R questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kevin Mac · 10-29-2019, 02:18 PM

I have a Quick Fuel carb and their website has linkage bracket shown for a 700 but not the 200. My question is are the ends the same for the cable hook up on carb, also do I have to change anything on the steering column for the extra gear?
Thanks Mac

Kevin Mac · 10-29-2019, 06:32 PM

Well with futher web serching and finding the recept from the PO on the steering column it is good for either 3 or 4 speed. Also found other carb linkage that is good for either 350 turbo, 700r4 or 2004r, so they must be the same there as well. Now to figure out about the lock up converter, any insight on that? I have read about putting a toggle switch but not really into that. In 2007 the column was $575, now it's $200 more, wow.
By the way the carb is a Quick Fuel Road Demon 625, at least that's what the recept says.
Mac
http://www.yogisinc.com/index.cfm/pa...d/prd14591.htm

**mr48chev** · 10-29-2019, 10:29 PM

https://www.youtube.com/watch?v=N-mXIikOeCU

This might be the simple way

Have amazon prime https://www.amazon.com/TCI-376600-Lo.../dp/B000NZVOO8

Kevin Mac · 10-30-2019, 07:31 AM

Thanks Mr 48, I also found a video from Monster Transmission that had good info.
Mac

10-29-2019, 02:18 PM	#1
Kevin Mac Registered User Join Date: Nov 2016 Location: Central Missouri Posts: 170	Turbo 350 swap to 200 4R questions I have a Quick Fuel carb and their website has linkage bracket shown for a 700 but not the 200. My question is are the ends the same for the cable hook up on carb, also do I have to change anything on the steering column for the extra gear? Thanks Mac

10-29-2019, 06:32 PM	#2
Kevin Mac Registered User Join Date: Nov 2016 Location: Central Missouri Posts: 170	Re: Turbo 350 swap to 200 4R questions Well with futher web serching and finding the recept from the PO on the steering column it is good for either 3 or 4 speed. Also found other carb linkage that is good for either 350 turbo, 700r4 or 2004r, so they must be the same there as well. Now to figure out about the lock up converter, any insight on that? I have read about putting a toggle switch but not really into that. In 2007 the column was $575, now it's $200 more, wow. By the way the carb is a Quick Fuel Road Demon 625, at least that's what the recept says. Mac http://www.yogisinc.com/index.cfm/pa...d/prd14591.htm

10-29-2019, 10:29 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,705	Re: Turbo 350 swap to 200 4R questions https://www.youtube.com/watch?v=N-mXIikOeCU This might be the simple way Have amazon prime https://www.amazon.com/TCI-376600-Lo.../dp/B000NZVOO8 __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

10-30-2019, 07:31 AM	#4
Kevin Mac Registered User Join Date: Nov 2016 Location: Central Missouri Posts: 170	Re: Turbo 350 swap to 200 4R questions Thanks Mr 48, I also found a video from Monster Transmission that had good info. Mac

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.