My King Ranch seat swap

[buspilot23]

I first saw a King Ranch seat swap on the 67-72 forums and thought it might be a good option for my truck. I was using my stock bench seat--but it was uncomfortable on long trips and placed me too high in the driver’s seat, and too close to the steering wheel. After doing some research, I learned that the rear seat from a 2006 F250/F350 series King Ranch truck would work for my application. I also learned that some seat swappers have used King Ranch front bucket seats or the front bench seats from the F150 King Ranch truck. I elected to use the F250/F350 rear seat to keep my cab as roomy as possible for my growing “Dad Bod.”

My buddy Jerami Sharkey sourced the donor seat from salvage yard inventory where it had been stored for several years. The seat was almost complete, except for one plastic hinge covers on the driver’s side. I made the purchase and loaded it up to take it home. After a thorough cleaning and several coats of leather conditioner, the new seat began to look like it might work for my truck.

IMG_0988 by James Page, on Flickr

IMG_0995 by James Page, on Flickr

IMG_1023 by James Page, on Flickr

The next step was to remove my old seat and lay down some Hushmat. While the seat was out I decided to replace my old rubber floor mats with a carpet kit from Auto Custom Carpets. I selected a beige color carpet to go with my beige seat belts and (hopefully) complement my saddle-colored vinyl door panels, headliner, and dash pad that I planned to reuse from a Brother’s Truck interior kit that had previously purchased about two years ago.


IMG_1158 by James Page, on Flickr


The first test-fit allowed me to mark the stock King Ranch seat bracket, which I determined could be modified to work in my C/10. After cutting down the bracket legs, drilling new holes, cleaning up my cut edges, and touching up the paint on the bracket edges, I bolted down the seat using some hardware I had laying around the garage. I drove the truck for a couple of weeks to decide if I really wanted to keep the King Ranch seat in my truck.

After a couple of weeks of driving I deciding that I wanted to keep the seat. I uninstalled it and installed my new carpet. After the carpet was installed, I again placed the seat in the cab to mark where I needed to cut the carpet for my permanent grade-eight hardware.

The first real challenge was doing something to rebrand the King Ranch seat so that it didn’t look like a Ford product in my Chevy. I elected to brand some leather with the C/10 Club Idaho logo. I paid for a brass branding iron that was CNC’ed with the club logo. I practiced my branding skills ruining a BUNCH of leather in the process. It turns out that branding leather is NOT easy. The results are contingent on a number of variables including the thickness of the leather, whether the leather is natural, veg-tanned, or chemical tanned, the heat of the iron, the duration that the iron is applied to the leather, the pressure used against the leather, and whether to use a wet branding process or dry-branding process.

IMG_1115 by James Page, on Flickr

IMG_1121 by James Page, on Flickr

IMG_1122 by James Page, on Flickr

IMG_1157 by James Page, on Flickr


IMG_1159 by James Page, on Flickr

IMG_1160 by James Page, on Flickr

The second challenge was finding leather that matched my seat. I failed. Many times. The local Tandy Leather store got a bunch of my money as I experimented with several scraps, hides, and various tanning products. Eventually, I realized I was not going to be satisfied unless the leather was an EXACT match to my existing seats. I decided to use a professional upholstery guy and asked Joe Scarlavai at @CCAutoUpholstery Custom Concepts Auto Upholstery to help me out. Joe did a headrest-delete, which not only made the seat look more period correct, but it also allowed us to repurpose the leather from the old headrests to create panels that would hide the headrest bracket holes while having enough leftover material for my branding-patches. Joe removed the leather covers and sewed on my newly branded patches, as well as his headrest delete panels. I couldn’t be happier with his work.

IMG_1163 by James Page, on Flickr

Finished

IMG_1175 by James Page, on Flickr

IMG_1176 by James Page, on Flickr

IMG_1181 by James Page, on Flickr

IMG_1187 by James Page, on Flickr

IMG_1189 by James Page, on Flickr

Before and After

beforeafter by James Page, on Flickr

[dmjlambert]

Just amazing. Wow, good idea.

[72 tigger]

Turned out very nice. Great craftsmanship and good attention to detail. Thanks for sharing

[FRCvette]

Excellent!!!!

[35boulder]

Well that's thinking outside the box. Nice job by your upholster guy. Well done.

[yuccales]

That looks darn nice!

[buspilot23]

Thanks for the comments guys. Joe at @CCAutoUpholstery on Facebook does great work. I am excited about how this project turned out. He had great ideas and was very affordable too.

[maverickmk]

I love those seats. Your truck looks awesome, very nice.

[Andy4639]

That sir is a great job! Very well done. The seat looks like it was made for the truck.

[Redneck Rydes]

That looks fantastic and more comfortable to.

[buspilot23]

Originally Posted by Redneck Rydes

That looks fantastic and more comfortable to.

Yes, I can actually sit in it for more than 30 minutes without getting all cramped-up. Getting old sucks.

[buspilot23]

Originally Posted by Andy4639

That sir is a great job! Very well done. The seat looks like it was made for the truck.

Yes, it seems to match the saddle door panels and headliner pretty nicely.

[Sheepdip]

Looks like it was a factory job....love it!

[69cam]

Top notch work. Looks to have freed up a lot of cab room.

[72 tigger]

You should post your seat on this thread too

http://67-72chevytrucks.com/vboard/s...=613744&page=5

[Morgan in AR]

That's really nice! Do you still have the tank behind the seat?

[Ol Blue K20]

Looks very nice. Great idea!

[chev-obsession]

Well done and excellent craftsmanship!

[CG]

Originally Posted by Morgan in AR

That's really nice! Do you still have the tank behind the seat?

Looks like the tank is still there in the fourth picture.

[old51sedan]

I bought a King Ranch crew cab brand new back in 2001. It had the bucket seats front and back, with a counsel front and back. I drove it 10 years and traded it, never thought about using the seats out of one. I have a tan interior in my truck and thinking about a set of buckets, which I have, but like the room of the bench. I will be doing some measuring and checking out a few bone yards. Nice job, love the way the headrests were removed and the logo installed.

[buspilot23]

Originally Posted by maverickmk

I love those seats. Your truck looks awesome, very nice.

Thanks brother!

[buspilot23]

Originally Posted by old51sedan

I bought a King Ranch crew cab brand new back in 2001. It had the bucket seats front and back, with a counsel front and back. I drove it 10 years and traded it, never thought about using the seats out of one. I have a tan interior in my truck and thinking about a set of buckets, which I have, but like the room of the bench. I will be doing some measuring and checking out a few bone yards. Nice job, love the way the headrests were removed and the logo installed.

It is a super comfortable seat, as you already know from your experience in 2001. Thanks for the compliments.

[buspilot23]

Originally Posted by CG

Looks like the tank is still there in the fourth picture.

It is still behind the seat. I plan to put a bed-mounted tank in at some point in the future, but probably not this year. I'm on a pretty strict budget.

[buspilot23]

Originally Posted by 72 tigger

You should post your seat on this thread too

http://67-72chevytrucks.com/vboard/s...=613744&page=5

Thanks. I'll do that.

[54blackhornet]

You should be very proud of yourself...beautiful..