|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-28-2020, 09:35 PM
|
#1 |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
$1.00 60-63 C10 Cab Cuts
Just got this cab. Not sure if any of you guys may need some cab cuts. Everything is available except for the BBW.
$1.00 plus the cost of shipping to you. Last edited by 67see10; 04-29-2020 at 02:26 AM. |
|
|
|
04-28-2020, 11:14 PM
|
#2 |
|
One foot in front of the other
 
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: $1.00 60-63 C10 Cab Cuts
Whats radio area look like?
|
|
|
|
|
04-29-2020, 01:44 AM
|
#3 |
|
Revitalizing a 6T C10
Join Date: Aug 2017
Location: Santa Barbara, CA
Posts: 222
|
Re: $1.00 60-63 C10 Cab Cuts
lower A pillar area, inside the cab about level with the dashboard
|
|
|
|
|
04-29-2020, 02:13 AM
|
#4 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
Last edited by 67see10; 04-29-2020 at 02:24 AM. |
|
|
|
|
|
04-29-2020, 02:14 AM
|
#5 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 02:23 AM
|
#6 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 03:44 AM
|
#7 |
|
Registered User
Join Date: Aug 2010
Location: Southern CA
Posts: 1,622
|
Re: $1.00 60-63 C10 Cab Cuts
Hi 67 I'll take the transmission firewall section and the radio delete plate. Thanks.
|
|
|
|
|
04-29-2020, 09:40 PM
|
#8 | |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 09:49 PM
|
#9 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 09:53 PM
|
#10 | |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 10:01 PM
|
#11 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: $1.00 60-63 C10 Cab Cuts
Speaker bracket happen to be still there? Defrost vents?
|
|
|
|
|
04-29-2020, 10:13 PM
|
#12 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 10:16 PM
|
#13 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 10:30 PM
|
#14 | |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-29-2020, 10:44 PM
|
#15 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,442
|
Re: $1.00 60-63 C10 Cab Cuts
Looks something like this to the right.
|
|
|
|
|
04-30-2020, 04:01 PM
|
#16 |
|
Senior Member
  
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: $1.00 60-63 C10 Cab Cuts
Any rust through on the upper corners of the windshield area? I need both sides inside and out. Also, if it has the passenger side sun visor bracket, I could use that area as well
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 04-30-2020 at 06:00 PM. |
|
|
|
|
04-30-2020, 05:08 PM
|
#17 |
|
Registered User
Join Date: Jun 2018
Location: Meridian, Idaho
Posts: 14
|
Re: $1.00 60-63 C10 Cab Cuts
I would take a 3 of pieces of the stamped back of the cab highlighted, say about 1 inch on each side of the bends and about 6 inches up, so they can fit in a priority box like Small Box 8 11/16" x 5 7/16" x 1 3/4" $7.65
or Medium Boxes 11 1/4" x 8 3/4" x 6" or 14" x 12" x 3 1/2" $13.20 , thanks Joe |
|
|
|
|
04-30-2020, 07:52 PM
|
#18 | |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
|
|
|
|
|
|
04-30-2020, 08:15 PM
|
#19 | |
|
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: $1.00 60-63 C10 Cab Cuts
Quote:
My zip is 30188 Thanks! *Edit* I will go check on my cab in a couple minutes to see if I need the inside part or not.
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
|
04-30-2020, 09:27 PM
|
#20 |
|
Registered User
Join Date: Jul 2017
Location: FL Born, UT Living
Posts: 139
|
Re: $1.00 60-63 C10 Cab Cuts
I'll start working on the cab cuts tomorrow.
|
|
|
|
|
04-30-2020, 11:31 PM
|
#21 |
|
Senior Member
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,488
|
Re: $1.00 60-63 C10 Cab Cuts
I checked my cab on the inside. It looks ok. It's the outside part that I know has some big holes in it
__________________
Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson |
|
|
|
|
05-02-2020, 08:55 PM
|
#22 |
|
Registered User
Join Date: Aug 2006
Location: Athens, Georgia
Posts: 1,458
|
Re: $1.00 60-63 C10 Cab Cuts
How much of the back window are you keeping? The whole panel, or are cuts along the bottom of the cab at the pinch weld available?
I need about two inches high, along the driver's side. It's been a while since I've seen the cab--if you're good with cutting that area, I'll go find out what I need exactly. -Brad
__________________
'61 Suburban daily driver: off the road due to 180-pound 8-pt buck! '62 K-10 long-step project '61 C30 Camper, aka "Valdez" There's no cool like Old School |
|
|
|
|
05-03-2020, 06:58 AM
|
#23 |
|
Registered User
Join Date: May 2009
Location: Monroe, LA
Posts: 2,104
|
Re: $1.00 60-63 C10 Cab Cuts
I’d like to have one side of the dash, for the “hump” portion on top.
__________________
Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 |
|
|
|
|
05-03-2020, 07:01 AM
|
#24 |
|
Registered User
Join Date: May 2009
Location: Monroe, LA
Posts: 2,104
|
Re: $1.00 60-63 C10 Cab Cuts
Either side of the dash will be fine for my purposes, whichever is the straightest.
__________________
Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 |
|
|
|
|
05-03-2020, 12:27 PM
|
#25 |
|
Registered User
Join Date: Feb 2009
Location: Middleton, Idaho
Posts: 235
|
Re: $1.00 60-63 C10 Cab Cuts
Can i get this section cut out please? let me know how much to 94513. Thanks
__________________
1963 Chevy suburban, ls1/4l60e, 3 rows, barn doors 2007 chevy 2500 hd 4x4 duramax |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
