GA 64 passenger fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 05-02-2020, 10:42 PM

My 63 fender has some rust in it, but it is still repairable. If I put this one on my truck, I'll have to drill new holes for the 63 badge and fill the holes for the 64 badge. Frankly, I don't really want to do that, so this fender is available until I change my mind and decide that drilling two holes and filling two others is easier than replacing a whole section.

It has been repainted, but I have not found any visible rust through. Unfortunately, the lower rear looks to have been dented and filled with bondo. From the glimpse through the drain hole, I could see a couple bondo boogers, but I don't see any concerning rust around said boogers. One dent towards the top of the fender around where the seam on the hood is.

I am keeping the fender badge.

$120 I would prefer local pickup, but if needed, I could get UPS to box it up and ship it.

SOLD

**The Rocknrod** · 05-04-2020, 10:47 AM

I've see worse.

**cwcarpenter98** · 05-04-2020, 01:22 PM

Quote:

Originally Posted by The Rocknrod

I've see worse.

I have too

I just couldn't let it sit in the junkyard any longer. Hopefully it will be used by someone who needs it or I'll use it for my truck

*bowties11* · 05-05-2020, 07:32 AM

I will take it pending shipping to 46938

MikeN · 05-05-2020, 09:37 AM

Put me 2nd in line.

**cwcarpenter98** · 05-05-2020, 04:51 PM

Quote:

Originally Posted by bowties11

I will take it pending shipping to 46938

PM sent with quote

Quote:

Originally Posted by MikeN

Put me 2nd in line.

In line

**cwcarpenter98** · 05-05-2020, 08:17 PM

Bowties11 passed because of the shipping. UPS quoted almost 4x the price of the fender to box it up and ship it

MikeN · 05-06-2020, 09:14 AM

I'll take it! Will set up a time to come to your parent's house and pick it up if that works for you.

**cwcarpenter98** · 05-06-2020, 11:07 AM

Quote:

Originally Posted by MikeN

I'll take it! Will set up a time to come to your parent's house and pick it up if that works for you.

It is yours, thanks. PM replied

05-02-2020, 10:42 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	64 passenger fender My 63 fender has some rust in it, but it is still repairable. If I put this one on my truck, I'll have to drill new holes for the 63 badge and fill the holes for the 64 badge. Frankly, I don't really want to do that, so this fender is available until I change my mind and decide that drilling two holes and filling two others is easier than replacing a whole section. It has been repainted, but I have not found any visible rust through. Unfortunately, the lower rear looks to have been dented and filled with bondo. From the glimpse through the drain hole, I could see a couple bondo boogers, but I don't see any concerning rust around said boogers. One dent towards the top of the fender around where the seam on the hood is. I am keeping the fender badge. $120 I would prefer local pickup, but if needed, I could get UPS to box it up and ship it. SOLD Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 05-11-2020 at 12:39 PM. Reason: Mike picked it up today.

05-04-2020, 10:47 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 64 passenger fender I've see worse. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-05-2020, 07:32 AM	#4
bowties11 Account Suspended Join Date: May 2011 Location: jonesboro indiana Posts: 592	Re: 64 passenger fender I will take it pending shipping to 46938

05-05-2020, 09:37 AM	#5
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 805	Re: 64 passenger fender Put me 2nd in line.

05-05-2020, 08:17 PM	#7
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,488	Re: 64 passenger fender Bowties11 passed because of the shipping. UPS quoted almost 4x the price of the fender to box it up and ship it __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

05-06-2020, 09:14 AM	#8
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 805	Re: 64 passenger fender I'll take it! Will set up a time to come to your parent's house and pick it up if that works for you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.