CA Toolbox Door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70LonghornCST · 08-15-2020, 10:56 AM

Here’s a nice toolbox door that has been taken down to the metal, patched, and is ready to be completed.
$350 shipped
Posted via Mobile Device

70LonghornCST · 08-22-2020, 11:47 AM

$345 shipped
Posted via Mobile Device

70LonghornCST · 08-23-2020, 01:37 PM

$300 shipped
Posted via Mobile Device

**Dieselwrencher** · 08-25-2020, 10:47 PM

Are those corners just welded up in the repaired area? It's hard to tell from the pics.

70LonghornCST · 08-25-2020, 11:12 PM

Quote:

Originally Posted by Dieselwrencher

Are those corners just welded up in the repaired area? It's hard to tell from the pics.

Yes. The corners are welded. It's all metal. I know the pics look like pitting, but it's mostly due to the discoloring from the heat of the welder. I used a cheap welder, so the welds were not pretty. I began grinding the welds down and was in the process of finishing it when I decided to change directions on my build. I'll get some closer pics for you tomorrow if you'd like.

**Dieselwrencher** · 08-26-2020, 12:36 AM

Quote:

Originally Posted by 70LonghornCST

Yes. The corners are welded. It's all metal. I know the pics look like pitting, but it's mostly due to the discoloring from the heat of the welder. I used a cheap welder, so the welds were not pretty. I began grinding the welds down and was in the process of finishing it when I decided to change directions on my build. I'll get some closer pics for you tomorrow if you'd like.

If you could that would be great. Thanks.

70LonghornCST · 08-26-2020, 03:59 PM

Quote:

Originally Posted by Dieselwrencher

If you could that would be great. Thanks.

Here’s some close ups. The spots you see are the welds. It still needs a bit more work, but much it’s done. It’s a solid core to restore.
Posted via Mobile Device

08-15-2020, 10:56 AM	#1
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Toolbox Door Here’s a nice toolbox door that has been taken down to the metal, patched, and is ready to be completed. $350 shipped Posted via Mobile Device Attached Images

08-22-2020, 11:47 AM	#2
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Toolbox Door $345 shipped Posted via Mobile Device

08-23-2020, 01:37 PM	#3
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Toolbox Door $300 shipped Posted via Mobile Device

08-25-2020, 10:47 PM	#4
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Toolbox Door Are those corners just welded up in the repaired area? It's hard to tell from the pics. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.