![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Sep 2005
Location: Colorado
Posts: 1,074
|
Blazer Hatch Rods with clips
Selling the last of my hatch rods. There are three of them, as you can see. Might not be a good fit for everyone, but a perfect fit for someone. I am including two original clips. It is possible one of them has a small piece missing. I don't see enough of these to compare them to. Like I said, a good fit for someone. Price is $45 plus $10 shipping and fees. First "I'll take it".
__________________
James |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Feb 2019
Location: Ozark, MO
Posts: 575
|
Re: Blazer Hatch Rods with clips
You don't have any extra clips, do you?
Of course I would pay for them. Terry |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Sep 2005
Location: Colorado
Posts: 1,074
|
Re: Blazer Hatch Rods with clips
No, I don't have any extras. The two clips I have here are from 3 sets of rods I had. I think the clips are real "unobtanium". I know there are a lot of people that bought the reproduction rods. They must all have had some idea what they were going to use for clips. Good luck!
__________________
James |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2008
Location: Mililani, HI
Posts: 52
|
Re: Blazer Hatch Rods with clips
I'll take it.
|
![]() |
![]() |
![]() |
#5 | |
Senior Member
![]() Join Date: Jul 2009
Location: SoCal
Posts: 206
|
Re: Blazer Hatch Rods with clips
** Guess What **... In all my studies on here I did find a source for clips and ordered some for my doors and they worked perfectly... Of course I was not sure which size I had so I asked for a set of all 3 sizes for the Left door and they worked... Here you go...
https://www.carburetion.com/Products...x?Search=clips Quote:
__________________
******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks.. ![]() |
|
![]() |
![]() |
![]() |
#6 | |
Registered User
![]() Join Date: Sep 2005
Location: Colorado
Posts: 1,074
|
Re: Blazer Hatch Rods with clips
Quote:
__________________
James |
|
![]() |
![]() |
![]() |
#7 |
Registered User
![]() Join Date: Sep 2005
Location: Colorado
Posts: 1,074
|
Re: Blazer Hatch Rods with clips
__________________
James |
![]() |
![]() |
![]() |
#8 | |
Registered User
Join Date: Jun 2013
Location: Homestead, Florida
Posts: 60
|
Re: Blazer Hatch Rods with clips
Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Senior Member
![]() Join Date: Jul 2009
Location: SoCal
Posts: 206
|
Re: Blazer Hatch Rods with clips
Hey Ctgry5,
I looked up the order email and unfortunately she did not list the 3 items ordered, only a total.. SO I looked around and found the other 2 zip locks that we did not use which was "CUD60" - too small and CU3614 - too big... So I am thinking it was: CU3612 Arm Clips Rod End 3/16in Left Hand CU3612 Arm Clips Rod End 3/16in LS each $1.29 Which fit the door rods on the left hand drivers door. Again, you might call them and see if you can send your sample in and they can match it up or take a chance and order them as they are only $1.29 ea plus shipping.. or order 1 and test it. I was just glad I found them as there are not many trucks in the boneyard out here. Todays temp is 109 degrees.. Meanwhile, I am still hunting for the Single Wall Metal Strips that hold the weather stripping around the door window glass...!!! If anyone sees them, please let me know.. Thanks. ...
__________________
******************************************** In-work on my 5.3L/4L65E/NP208 case conversion into a 1972 GMC JImmy 4x4... Not as simple as it looks folks.. ![]() Last edited by amcgeh01; 09-06-2020 at 05:48 PM. |
![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: Jun 2013
Location: Homestead, Florida
Posts: 60
|
![]() Quote:
Thanks for info bud |
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|