Wheel size and drop help! Pics please if you have them!!

[C10medic]

Fellas,

I am building a 69 c10 with ls6 swap. I have beltech drop spindles, springs, and shock kits to complete a 3/5 drop. Looking at a set of Foose wheels from a buddy, they are.....

18x8 255 45 18 front
20x10 305 35 20 rear

I know the tubs come with it for backspace, but not sure about 18 Front and 20 Rear combo.....any pics will be much appreciated!

[cornerstone]

If you look in the suspension area of the forum there are several threads that will have what you are looking for already.

[jrdv]

Doesn't hurt to start a new one. Been around awhile and know that the search feature is a great place to start, but...start a new one so the newbies will post something new.

4/6 drop
20's in the back
18's in the front

[C10medic]

Thanks fellas,

I have looked high and low and had no luck with a 3/5 drop. Jrdv, I love the look...did your 4/6 need an notch, I have read conflicting comments on this too. Some have done blocks etc, this can get confusing, but I am trying to make sure the stance is what I want the first time.

Thanks
Fellas

[C10medic]

What is the backspace on these...this is the look I am wanting....Beautiful Truck!

[jrdv]

I used the ECE drop. I did not notch the frame and have been fine for 8 years. I don't know the backspacing. I PM'd you. I also told you the front rims were 18x9, but after looking they are 18x8. The tires are Toyo Proxies.

Sorry! I don't get on the forum much anymore so my replies may be late!

[jrdv]

Look at the link in the bottom of my signature page for more pictures of the truck.