Fleetside bed measurement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gottwake · 07-24-2021, 12:47 AM

-
Looking for the measurement to the outside of the wheel wells on a fleetside bed.
Actually, the rolled part that cant be cut (inner fender is welded)

**MySons68C20** · 07-24-2021, 01:49 PM

Measured my 68 C20 comes out to 78 1/4" plus or minus 1/4"
The bed is on the truck so kind of hard to be exact.
I measured between the wheel wells and then from the inner wheel well to the radius above the tire X 2.
Hope that help!

Blake

07-24-2021, 12:47 AM	#1
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Fleetside bed measurement - Looking for the measurement to the outside of the wheel wells on a fleetside bed. Actually, the rolled part that cant be cut (inner fender is welded) Attached Images __________________ Blazer Project Last edited by LockDoc; 07-24-2021 at 10:27 AM.

07-24-2021, 01:49 PM	#2
MySons68C20 Senior Member Join Date: Sep 2014 Location: Wenatchee, Wa Posts: 977	Re: Fleetside bed measurement Measured my 68 C20 comes out to 78 1/4" plus or minus 1/4" The bed is on the truck so kind of hard to be exact. I measured between the wheel wells and then from the inner wheel well to the radius above the tire X 2. Hope that help! Blake

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.