|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-27-2003, 01:58 AM
|
#1 |
|
Registered User
Join Date: Dec 2003
Location: Kentucky, Ft. Campbell
Posts: 287
|
35X12.50rx15LT: how low can i go?
I have a 1986 GMC Sierra K1500 5.7L (M)
I have 35X12.50Rx15LT super swampers, And 2'' body lift and 6'' suspension lift.. I want to lower it. But if i went to stock springs would i grind it? What do i have to know? the wheelbase or wheelwell or something?    
|
|
|
|
12-27-2003, 02:40 AM
|
#2 |
|
huh ???
Join Date: Nov 2002
Location: Fredericksburg,Va.
Posts: 3,368
|
You could take the body lift out. 6" spring are enough for 35's. I wouldn't go much lower than that unless you put smaller tires on it...
Chuck
__________________
90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!" |
|
|
|
|
12-27-2003, 05:18 AM
|
#3 |
Join Date: Jan 2003
Location: Modesto, CA
Posts: 1,321
|
Your truck is 4wd right? If it is, you can run 35's with a BARE MINIMUM (and it's not advised) of 3" suspension lift...I ran 32's with a stock 75 C10 2wd...
|
|
|
|
|
12-27-2003, 07:07 AM
|
#4 |
|
Registered truck nut
Join Date: Dec 1999
Location: Mt. Vernon, Washington, USA
Posts: 1,584
|
You'll need a minimum of 4". Even then it'll probably rub when flexed out. Any less and you'll need to cut fenders some. Those Swampers usually measure out to a 35" unlike some brands that don't actually measure out to a true advertised size
__________________
MOUNT VERNON, WASH. STATE Need a part? Just PM me |
|
|
|
|
12-27-2003, 02:48 PM
|
#5 |
|
Registered User
Join Date: Dec 2003
Location: Kentucky, Ft. Campbell
Posts: 287
|
.
Last edited by BladeX; 12-29-2003 at 02:22 AM. |
|
|
|
|
12-29-2003, 02:23 AM
|
#6 |
|
Registered User
Join Date: Dec 2003
Location: Kentucky, Ft. Campbell
Posts: 287
|
i wanna lower it a little bit. But how low can a 4x4 truck go?
im sick of feelinge everysingle bump i got tough country shocks on there right now. Its a tank i feel every rock i run over. Any suggestions on shocks?ones what wouldnt make me grind but would be good? |
|
|
|
|
12-30-2003, 11:20 PM
|
#7 |
|
18436572
Join Date: Aug 2003
Location: Waynesboro, Va.
Posts: 488
|
Try the Edelbrock series shocks. I've only heard good things about these and they make a world of difference.
|
|
|
|
|
12-31-2003, 08:48 PM
|
#8 |
|
Account Suspended
Join Date: Oct 2002
Location: Elkhart, IN
Posts: 6,399
|
put stock springs and shocks on it, and ditch your body lift. hack the fenders and wheel the wee out of it. :thumbsup:
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
