TX WTB: Power Steering Bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lkt1954** · 01-10-2022, 03:39 PM

I'm looking for the bracket circled in the picture below (if this is the correct bracket for a 69 C10 with a 350 engine and AC).

Thanks

**dennislbrooks** · 01-12-2022, 08:51 AM

If you do not have to have stock. This should work ok. I used this on a 1971 350 with short water pump.

https://www.speedwaymotors.com/Power...vy,107165.html

**Rickysnickers** · 01-12-2022, 10:53 AM

You also might check with specialtyretail, Fred. He has a lot of these kinds of things.

01-10-2022, 03:39 PM	#1
lkt1954 Senior Member Join Date: Dec 2007 Location: Dumas, Texas Posts: 214	WTB: Power Steering Bracket I'm looking for the bracket circled in the picture below (if this is the correct bracket for a 69 C10 with a 350 engine and AC). Thanks Attached Images

01-12-2022, 08:51 AM	#2
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Re: WTB: Power Steering Bracket If you do not have to have stock. This should work ok. I used this on a 1971 350 with short water pump. https://www.speedwaymotors.com/Power...vy,107165.html __________________ 1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T

01-12-2022, 10:53 AM	#3
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,067	Re: WTB: Power Steering Bracket You also might check with specialtyretail, Fred. He has a lot of these kinds of things.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.