TX WTB Factory steering stabilizer shock bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CS1972** · 02-20-2022, 12:55 AM

Ordered a new steering stabilizer shock and tie rods for my 72K10 and then today when I went to install I finally (after 2.5 yrs) noticed that the bracket and associated hardware that attaches to the steering stabilizer bar, which I need to attach the stabilizer shock to is missing. Not sure why someone would take that all off and throw away.

The attached pics are what I need so I can finish this up - Bracket, Ubolts washers & nuts.

UPDATE: NO LONGER NEEDED, Dieselwrencher had one

Thanks

**CS1972** · 02-26-2022, 11:22 AM

Still looking............if all you have is the bracket to sell "I'll take it".

**CS1972** · 04-03-2022, 04:02 PM

Still look'n

**davischevy** · 04-03-2022, 09:16 PM

I went out back and looked the other day, and I don't have one. I have been keeping an eye out ever since you mentioned it.

**CS1972** · 04-08-2022, 03:17 PM

TTT for the weekend.........

BLAZERMAN · 04-08-2022, 11:47 PM

I know your wanting the factory bracket but this would work till you find one.
https://www.ruffstuffspecialties.com...RoCOuwQAvD_BwE

**CS1972** · 04-09-2022, 12:47 AM

I looked at using the Ruffstuff Flat Mount Steering Stabilizer Bracket, however, they only make it for 1.5" OD and the stabilizer bar on our trucks is 1.25" so I think the Ubolts & bracket would be a little sloppy.

BLAZERMAN · 04-09-2022, 01:23 AM

Quote:

Originally Posted by CS1972

I looked at using the Ruffstuff Flat Mount Steering Stabilizer Bracket, however, they only make it for 1.5" OD and the stabilizer bar on our trucks is 1.25" so I think the Ubolts & bracket would be a little sloppy.

This might work for you then.
https://www.ebay.com/itm/RockJock-CE...-127632-2357-0

**72ironmike** · 04-16-2022, 08:50 AM

Ron, I put a wanted on the 73-87 board. If one shows up it's yours.

**CS1972** · 04-16-2022, 10:30 AM

Seems odd to have that precise measurement of "19.06", but then you have leeway of 1/8" - plus or minus.

**Tmend** · 04-16-2022, 10:57 AM

I may still have the shock which I believe is the original one. I can measure fully extended and full collapsed. I’d say the mid point is good for install l. Let me know

**CS1972** · 04-19-2022, 08:57 AM

TTT ......... I made a bracket that is working, but I still want the Factory OEM bracket (as pictured below) if anyone has one.

**CS1972** · 04-25-2022, 10:40 PM

I no longer need one as Dieselwrencher (Ryan) took good care of me.

**davischevy** · 04-25-2022, 10:52 PM

You've got the love this place if you like these trucks.

02-20-2022, 12:55 AM	#1
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	WTB 4x4 Factory steering stabilizer shock bracket Ordered a new steering stabilizer shock and tie rods for my 72K10 and then today when I went to install I finally (after 2.5 yrs) noticed that the bracket and associated hardware that attaches to the steering stabilizer bar, which I need to attach the stabilizer shock to is missing. Not sure why someone would take that all off and throw away. The attached pics are what I need so I can finish this up - Bracket, Ubolts washers & nuts. UPDATE: NO LONGER NEEDED, Dieselwrencher had one Thanks Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White Last edited by CS1972; 04-25-2022 at 10:41 PM. Reason: Letting audience know I've found one

02-26-2022, 11:22 AM	#2
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket Still looking............if all you have is the bracket to sell "I'll take it". __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

04-03-2022, 04:02 PM	#3
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket Still look'n __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

04-03-2022, 09:16 PM	#4
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: WTB Factory steering stabilizer shock bracket I went out back and looked the other day, and I don't have one. I have been keeping an eye out ever since you mentioned it. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

04-08-2022, 03:17 PM	#5
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket TTT for the weekend......... __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

04-08-2022, 11:47 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,828	Re: WTB Factory steering stabilizer shock bracket I know your wanting the factory bracket but this would work till you find one. https://www.ruffstuffspecialties.com...RoCOuwQAvD_BwE __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

04-09-2022, 12:47 AM	#7
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket I looked at using the Ruffstuff Flat Mount Steering Stabilizer Bracket, however, they only make it for 1.5" OD and the stabilizer bar on our trucks is 1.25" so I think the Ubolts & bracket would be a little sloppy. __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

04-16-2022, 08:50 AM	#9
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,056	Re: WTB Factory steering stabilizer shock bracket Ron, I put a wanted on the 73-87 board. If one shows up it's yours.

04-16-2022, 10:30 AM	#10
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket Seems odd to have that precise measurement of "19.06", but then you have leeway of 1/8" - plus or minus. __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

04-16-2022, 10:57 AM	#11
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,305	Re: WTB Factory steering stabilizer shock bracket I may still have the shock which I believe is the original one. I can measure fully extended and full collapsed. I’d say the mid point is good for install l. Let me know __________________ Some progress is better then no progress

04-19-2022, 08:57 AM	#12
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket TTT ......... I made a bracket that is working, but I still want the Factory OEM bracket (as pictured below) if anyone has one. Attached Images __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White Last edited by CS1972; 04-19-2022 at 08:57 AM. Reason: forgot to explain the pic

04-25-2022, 10:40 PM	#13
CS1972 Senior Member Join Date: Jun 2018 Location: Austin Texas Posts: 449	Re: WTB Factory steering stabilizer shock bracket I no longer need one as Dieselwrencher (Ryan) took good care of me. __________________ Ron 1972 Cheyenne Super 1/2 ton LWB 4x4 - Grapefruit Yellow / White

04-25-2022, 10:52 PM	#14
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: WTB Factory steering stabilizer shock bracket You've got the love this place if you like these trucks. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.