Parking brake components needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KDogApache59 · 02-27-2022, 10:39 AM

Looking for a set of parking brake levers and struts for a 67 truck rear end. Anyone have anything off a parks rig or know of a source? Thanks in advance.

**Accelo** · 02-27-2022, 11:09 AM

Do you mean the levers that are attached to the cross member?
What are struts in 67? Are they part of the levers on the cross-member?

**Grumpy old man** · 02-27-2022, 11:22 AM

ROCKAUTO

https://www.rockauto.com/en/catalog/...ke+strut,10715

KDogApache59 · 02-27-2022, 07:11 PM

Hoping someone did a disc brake swap on the rear and had the parts I need.

Parking brake lever left hand side; PN GM 15594177 is available from different vendors. Right hand side is PN GM 15594178 and is discontinued. These levers attach to the primary brake shoe and connect to the parking brake cable. Struts and springs I can get from current vendors as well (thanks Grumpy). They sit between the secondary brake shoe and the parking brake lever.

The only part I can't source is the right hand brake lever but figured that if someone had that piece they likely had the rest as well. Going to check my local salvage yards this week but though I might wander onto what I need here first.

Tried to attach a photo link below, don't think it works.

Thanks

KT

02-27-2022, 10:39 AM	#1
KDogApache59 Registered User Join Date: Sep 2016 Location: Ash Grove Posts: 2	Parking brake components needed Looking for a set of parking brake levers and struts for a 67 truck rear end. Anyone have anything off a parks rig or know of a source? Thanks in advance.

02-27-2022, 11:09 AM	#2
Accelo Senior Member Join Date: Mar 2015 Location: washington Posts: 2,280	Re: Parking brake components needed Do you mean the levers that are attached to the cross member? What are struts in 67? Are they part of the levers on the cross-member?

02-27-2022, 11:22 AM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Parking brake components needed ROCKAUTO https://www.rockauto.com/en/catalog/...ke+strut,10715 __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

02-27-2022, 07:11 PM	#4
KDogApache59 Registered User Join Date: Sep 2016 Location: Ash Grove Posts: 2	Re: Parking brake components needed Hoping someone did a disc brake swap on the rear and had the parts I need. Parking brake lever left hand side; PN GM 15594177 is available from different vendors. Right hand side is PN GM 15594178 and is discontinued. These levers attach to the primary brake shoe and connect to the parking brake cable. Struts and springs I can get from current vendors as well (thanks Grumpy). They sit between the secondary brake shoe and the parking brake lever. The only part I can't source is the right hand brake lever but figured that if someone had that piece they likely had the rest as well. Going to check my local salvage yards this week but though I might wander onto what I need here first. Tried to attach a photo link below, don't think it works. Thanks KT

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.