MA Dog Dish hubcaps 1/2 ton and 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mikeEboy** · 02-12-2023, 10:19 AM

I have a few sets:

Set of 4 12 inch 3/4 ron, 2wd (no hole cutouts in front) with blue bowties. They are in structurally good shape but they have small dings. All the edges are in good shape. $300 plus shipping

Set of 4 10 inch 1/2 inch 4wd Set with front center holes. These are from. Later 70's with gold bowtie. This Set is in very good shape. $225 plus shipping

Set of 2. 10 inch 4wd front hubcaps with center holes. The holes are not OEM, they were cut by previous owner. These are in good shape visually but both have a hairline split on edge that has been epoxy repaired by previous owner. $75 plus shipping.

I can send pics if interested

**402Bowtie** · 02-12-2023, 11:10 AM

Interested in the 4x4 set for $225. Could I see pics?

**mikeEboy** · 02-12-2023, 11:33 AM

402Bowtie, I sent you a PM

**HWY-STAR** · 02-12-2023, 11:43 AM

I'm interested in the 4-12 inch-3//4 ton hubcaps. Can you send pictures. Thank you.

**Tmend** · 02-12-2023, 11:53 AM

I treated in the 1/2 ton 4x4 ones pending photos

**402Bowtie** · 02-12-2023, 02:11 PM

I will pass on the hubcaps. These are a later style than I'm looking for. Thanks

I attached your pics.

**mikeEboy** · 02-12-2023, 03:04 PM

Quote:

Originally Posted by HWY-STAR

I'm interested in the 4-12 inch-3//4 ton hubcaps. Can you send pictures. Thank you.

Just uploaded some pics

**mikeEboy** · 02-12-2023, 04:50 PM

Quote:

Originally Posted by HWY-STAR

I'm interested in the 4-12 inch-3//4 ton hubcaps. Can you send pictures. Thank you.

Pictures uploaded

**mikeEboy** · 02-13-2023, 08:56 AM

[Here are some pictures of the 10 inch with open center.

QUOTE=Tmend;9177770]I treated in the 1/2 ton 4x4 ones pending photos[/QUOTE]

**craneboy72** · 02-13-2023, 10:07 AM

how much for the open fronts

**Tmend** · 02-13-2023, 10:38 AM

Quote:

Originally Posted by mikeEboy

[Here are some pictures of the 10 inch with open center.

QUOTE=Tmend;9177770]I treated in the 1/2 ton 4x4 ones pending photos

[/QUOTE]

Thank you sir I’ll take them. pm sent with address

**craneboy72** · 02-13-2023, 11:00 AM

sorry just saw 75.00

**mikeEboy** · 02-13-2023, 02:02 PM

Quote:

Originally Posted by Tmend

I treated in the 1/2 ton 4x4 ones pending photos

The set of two 10 inch 4x4 hubcaps have been sold to Tmend. Payment received. Thank you

**HWY-STAR** · 02-14-2023, 02:53 AM

I will purchase the 4 blue bowtie 12 inch caps. Thanks Mike

**mikeEboy** · 02-17-2023, 10:18 PM

The set of two 4x4 front hubcaps have sold. The set of four 3/4 ton 12 inch 2wd with blue bowtie have sold, awaiting payment. The set of four later model square body 4wd gold bowtie hubcaps are still available. These are 1/2 ton, 10 inch. Price reduced to $200 including shipping. I also posted them on the square body forum. These are in excellent condition, no dings, dents or scratches.

02-12-2023, 10:19 AM	#1
mikeEboy Junior Member Join Date: May 2022 Location: West Newton, MA Posts: 32	Dog Dish hubcaps 1/2 ton and 3/4 ton I have a few sets: Set of 4 12 inch 3/4 ron, 2wd (no hole cutouts in front) with blue bowties. They are in structurally good shape but they have small dings. All the edges are in good shape. $300 plus shipping Set of 4 10 inch 1/2 inch 4wd Set with front center holes. These are from. Later 70's with gold bowtie. This Set is in very good shape. $225 plus shipping Set of 2. 10 inch 4wd front hubcaps with center holes. The holes are not OEM, they were cut by previous owner. These are in good shape visually but both have a hairline split on edge that has been epoxy repaired by previous owner. $75 plus shipping. I can send pics if interested Attached Images Last edited by mikeEboy; 02-12-2023 at 04:52 PM. Reason: add pictures

02-12-2023, 11:10 AM	#2
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton Interested in the 4x4 set for $225. Could I see pics? __________________ Link to Parts I am Selling Build Date Thread: GMC, 68-71 Chevy, 72 Chevy

02-12-2023, 11:33 AM	#3
mikeEboy Junior Member Join Date: May 2022 Location: West Newton, MA Posts: 32	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton 402Bowtie, I sent you a PM

02-12-2023, 11:43 AM	#4
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 299	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton I'm interested in the 4-12 inch-3//4 ton hubcaps. Can you send pictures. Thank you. __________________ 72 sierra grande 402/400 72 longhorn 402/400-----FOR SALE 67 swb fleet side 350/350 buddy buckets tack/vac dash project-------SOLD 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed----SOLD 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod----SOLD 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles 71 C20 custom camper, Co truck, auto, 454

02-12-2023, 11:53 AM	#5
Tmend Senior Member Join Date: Nov 2010 Location: Reseda CA Posts: 1,305	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton I treated in the 1/2 ton 4x4 ones pending photos __________________ Some progress is better then no progress

02-12-2023, 02:11 PM	#6
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton I will pass on the hubcaps. These are a later style than I'm looking for. Thanks I attached your pics. Attached Images __________________ Link to Parts I am Selling Build Date Thread: GMC, 68-71 Chevy, 72 Chevy

02-13-2023, 08:56 AM	#9
mikeEboy Junior Member Join Date: May 2022 Location: West Newton, MA Posts: 32	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton [Here are some pictures of the 10 inch with open center. QUOTE=Tmend;9177770]I treated in the 1/2 ton 4x4 ones pending photos[/QUOTE] Attached Images

02-13-2023, 10:07 AM	#10
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 761	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton how much for the open fronts

02-13-2023, 11:00 AM	#12
craneboy72 Senior Member Join Date: Jun 2015 Location: Acton Ma Posts: 761	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton sorry just saw 75.00

02-14-2023, 02:53 AM	#14
HWY-STAR Senior Member Join Date: Jan 2021 Location: South east Mn. Posts: 299	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton I will purchase the 4 blue bowtie 12 inch caps. Thanks Mike __________________ 72 sierra grande 402/400 72 longhorn 402/400-----FOR SALE 67 swb fleet side 350/350 buddy buckets tack/vac dash project-------SOLD 71 Cheyenne c20 350/350 all original except seat cover-SOLD 1970 GMC 3500 SRW 350 4 speed----SOLD 72 c-30 bb 4 speed dump bed 72 k-20 4x4 350/350 patina rat rod----SOLD 80 chevy p20 aluminum step van 350/400 12 ft cargo 62 parts car & 63 project nova, 4 door 6 cy 74 Honda cb 360 only 4000 miles 71 C20 custom camper, Co truck, auto, 454

02-17-2023, 10:18 PM	#15
mikeEboy Junior Member Join Date: May 2022 Location: West Newton, MA Posts: 32	Re: Dog Dish hubcaps 1/2 ton and 3/4 ton The set of two 4x4 front hubcaps have sold. The set of four 3/4 ton 12 inch 2wd with blue bowtie have sold, awaiting payment. The set of four later model square body 4wd gold bowtie hubcaps are still available. These are 1/2 ton, 10 inch. Price reduced to $200 including shipping. I also posted them on the square body forum. These are in excellent condition, no dings, dents or scratches. Attached Images Last edited by mikeEboy; 02-17-2023 at 10:24 PM. Reason: pictures

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.