Ever been tempted to save a truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Warrens69GMC** · 04-07-2023, 11:11 PM

I just bought this "parts truck", but for the life of me I want to fix it.
It would be different if I didn't have a 1976 c20 rolling frame. a 1970 396/402-th400 combo.

No title, but I may see what I need to do to get one.

jumpsoffrock · 04-07-2023, 11:36 PM

There's absolutely nothin wrong with you, proceed as usual soldier.

**68bowtie** · 04-08-2023, 12:23 AM

Crazy in a good way. Ish… lol

**truckster** · 04-08-2023, 12:24 AM

Ambitious... very ambitious.

best view · 04-08-2023, 07:35 AM

Well it does have a/c and you’re in az so that should help go for it

**special-K** · 04-08-2023, 07:45 AM

As we say, "It's all there"

. Ok, maybe not all. We also say, "There's something there to work with"

i have my eye on a 71/72 longbed medium green with aluminum cap sitting on the hillside, somewhat wooded, tree debris piling up I really want to see if they'll sell. Thus is at what once was a junk yard/towing business. I knew the owners, husband and wife. I also somewhat know the son who is now running just the towing end... barely. He has always been lazy, even back when they had acres of vehicles needing parts sold off of them. Everyone knew he was lazy and you were lucky to end up buying a part from him. No one allowed in the yard and he wasn't keen on getting off his rear to check. I'd go with a specific part needed and he would let be go back, escorted. They'd set the better more complete vehicles out front for sale for a while, and this Custom/10 was one. The yard is cleared out, but for a few vehicles and this pickup is one. I am sure it's a case where the truck is being allowed to rot and as soon as I ask about buying it will become a priceless classic. But one of these days when I feel I have time I will most likely be wasting I'm stopping by to see

Yamariv · 04-08-2023, 11:04 AM

Yes OP you should save it!! There are LOTS of rolling chassis around, I see them pop up here all the time. They aren't making anymore of these beauties and full running trucks are getting harder to find!

**kwmech** · 04-08-2023, 11:40 AM

That's a longhorn too! HD frame and a longer wheel base. Got a 68 version in my garage

**Warrens69GMC** · 04-08-2023, 11:47 AM

Quote:

Originally Posted by kwmech

That's a longhorn too! HD frame and a longer wheel base. Got a 68 version in my garage

Yes it is. That is why I'm thinking of trying to save it.

Yamariv · 04-08-2023, 12:07 PM

Quote:

Originally Posted by Warrens69GMC

Yes it is. That is why I'm thinking of trying to save it.

So they made a longer wheel base than the regular long boxes? Frame must be longer as well?

**Warrens69GMC** · 04-08-2023, 12:18 PM

Quote:

Originally Posted by Yamariv

So they made a longer wheel base than the regular long boxes? Frame must be longer as well?

Yes. 6" longer, and gave it a 1 ton frame whether it was 3/4 or 1 ton.

Why did they cut the bed like that? To make it a short bed!!

Yamariv · 04-08-2023, 12:47 PM

Quote:

Originally Posted by Warrens69GMC

Yes. 6" longer, and gave it a 1 ton frame whether it was 3/4 or 1 ton.

Why did they cut the bed like that? To make it a short bed!!

Think you could find the longer frame? Are they rare?

**Warrens69GMC** · 04-08-2023, 12:51 PM

This is on the original frame, so it's correct. I'm sure if you looked you could find a frame.

Not many made, I think less than 3k per year.

Yamariv · 04-08-2023, 01:37 PM

Quote:

Originally Posted by Warrens69GMC

This is on the original frame, so it's correct. I'm sure if you looked you could find a frame.

Not many made, I think less than 3k per year.

Oh sorry, I misread your original post. Cool, frame is there then lets DO IT!!

I'm subscribed!

Keith Seymore · 04-08-2023, 01:46 PM

Quote:

Originally Posted by Warrens69GMC

Ever been tempted to save a truck?

Every

Single

One

That I see.

K

**too much stuff** · 04-08-2023, 01:57 PM

If you have seen what has been saved from the rust belt here, you wouldn't even have to ask. Got it running yet???

**Warrens69GMC** · 04-08-2023, 02:13 PM

Quote:

Originally Posted by too much stuff

If you have seen what has been saved from the rust belt here, you wouldn't even have to ask. Got it running yet???

He is seeing what's up with the title. I move it next week.

Passenger A pillar needs major work.

**68bowtie** · 04-08-2023, 09:10 PM

Quote:

Originally Posted by Yamariv

Oh sorry, I misread your original post. Cool, frame is there then lets DO IT!!

I'm subscribed!

I’m in too. You can’t change your mind now. Feelings will be hurt…

jumpsoffrock · 04-08-2023, 10:21 PM

Quote:

Originally Posted by Warrens69GMC

Passenger A pillar needs major work.

I hate that crap, at least the floor and cab corner rust is relatively consistent with our truck.
But sometimes i see A pillar rust gone crazy, and other trucks I see show no signs whatsoever.

Both of my cabs have the beginnings of A pillar rust.....

**Warrens69GMC** · 04-08-2023, 10:31 PM

Quote:

Originally Posted by jumpsoffrock

I hate that crap, at least the floor and cab corner rust is relatively consistent with our truck.
But sometimes i see A pillar rust gone crazy, and other trucks I see show no signs whatsoever.

Both of my cabs have the beginnings of A pillar rust.....

Not rust, looks like someone cut it out for a patch for another cab.
I will post a picture.

**Warrens69GMC** · 04-08-2023, 10:40 PM

front suspension complete, big block stands A/C on firewall....

Here's the original listing, bought it from someone I know............$500.00

https://www.facebook.com/marketplace...ssenger_banner

**68bowtie** · 04-08-2023, 11:03 PM

Ouchy!

**dmjlambert** · 04-09-2023, 12:02 AM

I see pillars are reproduced nowadays. It think it would be good to get it going again. I very rarely see a parts truck in worse condition than my daily driver. I'm just amazed at what good trucks get parted out.

**Warrens69GMC** · 04-09-2023, 12:08 AM

If I can't get a title, I'm going to put my GMC on this chassis and use the longhorn bed.

best view · 04-09-2023, 07:19 AM

That pillar is repoped and easy to replace , u can get a title in Vermont

04-07-2023, 11:11 PM	#1
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,621	Ever been tempted to save a truck? I just bought this "parts truck", but for the life of me I want to fix it. It would be different if I didn't have a 1976 c20 rolling frame. a 1970 396/402-th400 combo. No title, but I may see what I need to do to get one. Attached Images __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

04-07-2023, 11:36 PM	#2
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 975	Re: Ever been tempted to save a truck? There's absolutely nothin wrong with you, proceed as usual soldier.

04-08-2023, 12:23 AM	#3
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: Ever been tempted to save a truck? Crazy in a good way. Ish… lol __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

04-08-2023, 12:24 AM	#4
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Ever been tempted to save a truck? Ambitious... very ambitious. __________________ I have sworn upon the altar of God, eternal hostility against every form of tyranny over the mind of man. - Thomas Jefferson

04-08-2023, 07:35 AM	#5
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,152	Re: Ever been tempted to save a truck? Well it does have a/c and you’re in az so that should help go for it

04-08-2023, 07:45 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Ever been tempted to save a truck? As we say, "It's all there" . Ok, maybe not all. We also say, "There's something there to work with" i have my eye on a 71/72 longbed medium green with aluminum cap sitting on the hillside, somewhat wooded, tree debris piling up I really want to see if they'll sell. Thus is at what once was a junk yard/towing business. I knew the owners, husband and wife. I also somewhat know the son who is now running just the towing end... barely. He has always been lazy, even back when they had acres of vehicles needing parts sold off of them. Everyone knew he was lazy and you were lucky to end up buying a part from him. No one allowed in the yard and he wasn't keen on getting off his rear to check. I'd go with a specific part needed and he would let be go back, escorted. They'd set the better more complete vehicles out front for sale for a while, and this Custom/10 was one. The yard is cleared out, but for a few vehicles and this pickup is one. I am sure it's a case where the truck is being allowed to rot and as soon as I ask about buying it will become a priceless classic. But one of these days when I feel I have time I will most likely be wasting I'm stopping by to see __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-08-2023, 11:04 AM	#7
Yamariv Registered User Join Date: Oct 2022 Location: Regina, Saskatchewan Posts: 343	Re: Ever been tempted to save a truck? Yes OP you should save it!! There are LOTS of rolling chassis around, I see them pop up here all the time. They aren't making anymore of these beauties and full running trucks are getting harder to find! __________________ 1971 Chev C10 - 250ci L6 w/3 speed on the floor Upgrades: Power Steering 3 Core Radiator 7 Hole Gauge Cluster Power Brakes (Incoming!!..) 1971 350 (Incoming!!..)

04-08-2023, 11:40 AM	#8
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,628	Re: Ever been tempted to save a truck? That's a longhorn too! HD frame and a longer wheel base. Got a 68 version in my garage

04-08-2023, 12:51 PM	#13
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,621	Re: Ever been tempted to save a truck? This is on the original frame, so it's correct. I'm sure if you looked you could find a frame. Not many made, I think less than 3k per year. __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

04-08-2023, 01:57 PM	#16
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: Ever been tempted to save a truck? If you have seen what has been saved from the rust belt here, you wouldn't even have to ask. Got it running yet??? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-08-2023, 10:40 PM	#21
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,621	Re: Ever been tempted to save a truck? front suspension complete, big block stands A/C on firewall.... Here's the original listing, bought it from someone I know............$500.00 https://www.facebook.com/marketplace...ssenger_banner Attached Images __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT Last edited by Warrens69GMC; 04-08-2023 at 10:48 PM.

04-08-2023, 11:03 PM	#22
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: Ever been tempted to save a truck? Ouchy! __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

04-09-2023, 12:02 AM	#23
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,859	Re: Ever been tempted to save a truck? I see pillars are reproduced nowadays. It think it would be good to get it going again. I very rarely see a parts truck in worse condition than my daily driver. I'm just amazed at what good trucks get parted out.

04-09-2023, 12:08 AM	#24
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,621	Re: Ever been tempted to save a truck? If I can't get a title, I'm going to put my GMC on this chassis and use the longhorn bed. __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

04-09-2023, 07:19 AM	#25
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,152	Re: Ever been tempted to save a truck? That pillar is repoped and easy to replace , u can get a title in Vermont



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.