Difference between 1" and 1.25" rotors? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

8t5Silverado · 01-08-2004, 06:20 PM

I found someone with a set of dropped spindles, but they don't know if they are for the 1" or 1.25" rotors.

How can I tell?

Thanks,
Brandon

TIMSPEED · 01-08-2004, 06:27 PM

Quote:

Originally posted by 8t5Silverado
I found someone with a set of dropped spindles, but they don't know if they are for the 1" or 1.25" rotors. How can I tell?

What brand are they? Usually, they have a part # stamped on them, if you can get that, post it and we'll go from there.

Slonaker · 01-08-2004, 07:53 PM

Tell them that if they were able to stick their fingers in the holes on the edge of the rotor, they were 1 1/4 rotors. Of course, if they never saw the rotors, it won't help...

Slonaker

**swervin ervin** · 01-08-2004, 07:57 PM

Measure them.

8t5Silverado · 01-08-2004, 08:02 PM

He doesn't have the truck anymore.

Can I measure the spindle length?

I will ask about the part number.

8t5Silverado · 01-09-2004, 02:51 PM

Ok, they are for the 1" brake rotors, so I can't use them.

They are on ebay for $50 right now. The seller is holidaymansion if anyone is interested.

01-08-2004, 06:20 PM	#1
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Difference between 1" and 1.25" rotors? I found someone with a set of dropped spindles, but they don't know if they are for the 1" or 1.25" rotors. How can I tell? Thanks, Brandon

01-08-2004, 07:53 PM	#3
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Tell them that if they were able to stick their fingers in the holes on the edge of the rotor, they were 1 1/4 rotors. Of course, if they never saw the rotors, it won't help... Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

01-08-2004, 07:57 PM	#4
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Measure them. __________________ Mike 1985 Chevy C-10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-08-2004, 08:02 PM	#5
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	He doesn't have the truck anymore. Can I measure the spindle length? I will ask about the part number.

01-09-2004, 02:51 PM	#6
8t5Silverado Mudslides 'r my specialty Join Date: Dec 2003 Location: STL Posts: 1,106	Ok, they are for the 1" brake rotors, so I can't use them. They are on ebay for $50 right now. The seller is holidaymansion if anyone is interested.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.