Did I bend the frame?...I wrecked!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iluvmy72 · 01-10-2004, 03:19 AM

I was in a car wreck a few months ago and havn't had much time to really look into fixing the old beater.....however.....I'm wondering if I bent the frame.....the parts that the front bumper bolt onto are totally bent.....is that the frame?.....it doesn't look repairable.....can it be replaced or would I be better off with another frame since the rest of the body parts no longer line up either. None of the body was damaged though.....just the frame, grill, and bumper.......I slammed into a truck with his ball hitch sticking out and turned my bumper into a "V". I might just as well replace the frame......anyone in Utah have a decent shortbed frame?

imdarren · 01-10-2004, 03:40 AM

Sounds like you may need a frame.
You are not talking about the bumper brackets on the left and right sides of the bumpers are you?

Just curious why it says you live in CA, and need a frame from Utah? None of my business really, just curious.:p
A frame from Utah would have a lot more rust that one from California!

Darren

magoo72 · 01-10-2004, 05:50 AM

I WOOD AT LEAST TAKE IT TO A BODY SHOP AND SEE CAN THEY STRAIGHTED YOUR HORNS ON THERE FRAME MACHINE.
WHAT WERE YOU DOING DARREN! WHERE WAS YOUR MIND? THESE OLD TRUCKS ARE GETTING FEWER AND FEWER EVERYDAY
EVERY DAY ONE GETS CRUSHED SOMEWHERE IN THE USA.
IF YOU ARE GOING TO DRIVE A CLASSIC ,YOU BETTER HAVE YOUR FOCUS ON THE ROAD,NOT PIDDLING W/YOUR STERIO,OR LOOKING AT SOME SHORT SKIRT GIRL WITH A BELLY RING WALKEN DOWN THE ROAD!! STAY FOCUS!!!
I TRUST EVERYONE ENVOLVED WAS OK! AND I KNOW YOU WERE WEARING YOUR SEATBELT.
MRMAGOO

Longhorn Man · 01-10-2004, 08:12 AM

Uh oh...we can't look at chicks with short skirts as we drive our trucks?
Hmmmm, I guess i need to get a Cavilear daily driver/beater.

SEVEND2 · 01-10-2004, 08:14 AM

LOOKING AT SOME SHORT SKIRT GIRL WITH A BELLY RING WALKEN DOWN THE ROAD.....

Dam and I Missed it again, Where was she walking again?

Longhorn Man · 01-10-2004, 08:23 AM

She was getting into my truck.

01-10-2004, 03:19 AM	#1
iluvmy72 Registered User Join Date: Jan 2002 Location: Springville, UT, USA Posts: 1,010	Did I bend the frame?...I wrecked!! I was in a car wreck a few months ago and havn't had much time to really look into fixing the old beater.....however.....I'm wondering if I bent the frame.....the parts that the front bumper bolt onto are totally bent.....is that the frame?.....it doesn't look repairable.....can it be replaced or would I be better off with another frame since the rest of the body parts no longer line up either. None of the body was damaged though.....just the frame, grill, and bumper.......I slammed into a truck with his ball hitch sticking out and turned my bumper into a "V". I might just as well replace the frame......anyone in Utah have a decent shortbed frame?

01-10-2004, 03:40 AM	#2
imdarren Registered User Join Date: Oct 2001 Location: SW Washington Posts: 1,006	Sounds like you may need a frame. You are not talking about the bumper brackets on the left and right sides of the bumpers are you? Just curious why it says you live in CA, and need a frame from Utah? None of my business really, just curious.:p A frame from Utah would have a lot more rust that one from California! Darren __________________ Washington State 1967 Chevy C10 LWB Rodstoration In Progress. 1972 K20 Cheyenne Super

01-10-2004, 08:14 AM	#5
SEVEND2 Registered User Join Date: Aug 2001 Location: Menifee, Calif, USA Posts: 2,145	LOOKING AT SOME SHORT SKIRT GIRL WITH A BELLY RING WALKEN DOWN THE ROAD..... Dam and I Missed it again, Where was she walking again? __________________ With a 1972 Chevy Custom-10 Long bed w/350cid th350, (under-construction). Progress on truck so far (follow link): http://67-72chevytrucks.com/vboard/s...ad.php?t=51051 and stage 2 http://67-72chevytrucks.com/vboard/s...ad.php?t=58132 ~ "Why couldn't you have just put the bunny back in the box?" ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-10-2004, 05:50 AM	#3
magoo72 Registered User Join Date: Jan 2003 Location: minden la Posts: 114	I WOOD AT LEAST TAKE IT TO A BODY SHOP AND SEE CAN THEY STRAIGHTED YOUR HORNS ON THERE FRAME MACHINE. WHAT WERE YOU DOING DARREN! WHERE WAS YOUR MIND? THESE OLD TRUCKS ARE GETTING FEWER AND FEWER EVERYDAY EVERY DAY ONE GETS CRUSHED SOMEWHERE IN THE USA. IF YOU ARE GOING TO DRIVE A CLASSIC ,YOU BETTER HAVE YOUR FOCUS ON THE ROAD,NOT PIDDLING W/YOUR STERIO,OR LOOKING AT SOME SHORT SKIRT GIRL WITH A BELLY RING WALKEN DOWN THE ROAD!! STAY FOCUS!!! I TRUST EVERYONE ENVOLVED WAS OK! AND I KNOW YOU WERE WEARING YOUR SEATBELT. MRMAGOO

01-10-2004, 08:12 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Uh oh...we can't look at chicks with short skirts as we drive our trucks? Hmmmm, I guess i need to get a Cavilear daily driver/beater.

01-10-2004, 08:23 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	She was getting into my truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.