evercoat body filler - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71chevylongbed · 01-12-2004, 10:17 PM

will evercoat z-grip light weight filler work for filling some of the larger dents on my truck like smoothing my bed rails and a little crease in my door and a dent in the corner of my front fender.

*1972C10* · 01-12-2004, 10:29 PM

Works about as good as any other body filler i try not to put it on over 1/8 thick helps to pull the dent as much as possible. Or drill small holes for it to stick to

**too much stuff** · 01-12-2004, 10:33 PM

Its a good product, but i would get a uni-spotter and pull the dents better and try to keep the filler as thin as possible. If you drill any holes, its just a place for moisture to come through. (especially in MN)

71chevylongbed · 01-12-2004, 11:00 PM

thanks, i'm glad it will work because i bought a gallon can of it!

01-12-2004, 10:17 PM	#1
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	evercoat body filler will evercoat z-grip light weight filler work for filling some of the larger dents on my truck like smoothing my bed rails and a little crease in my door and a dent in the corner of my front fender. __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

01-12-2004, 10:33 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Its a good product, but i would get a uni-spotter and pull the dents better and try to keep the filler as thin as possible. If you drill any holes, its just a place for moisture to come through. (especially in MN) __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-12-2004, 11:00 PM	#4
71chevylongbed Got Horsepower? Join Date: Sep 2003 Location: IDAHO Posts: 406	thanks, i'm glad it will work because i bought a gallon can of it! __________________ 2001 Dodge 2500 Cummins, 4 inch lift, 35" Toyo MT's on Ultra wheels, P-Pump Conversion, AFE intake, Fass, 5 inch exhaust, Pyro,Boost,and Fuel pressure guages, and a whole bunch of other stuff "The Money Pit" SOLD-71 Chevy C10 long bed- 2/4 drop-- 350,th400, Edelbrock performer RPM intake,Edelbrock 600 CFM carb,Crower 240 cam,port and polish,Dynomax headers,HEI ignition,dual 2.5 inch exhaust with Flowmaster 50 series mufflers

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-12-2004, 10:29 PM	#2
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Works about as good as any other body filler i try not to put it on over 1/8 thick helps to pull the dent as much as possible. Or drill small holes for it to stick to



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.