Canada 72 Blazer Frame value - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Shock_Me** · 07-24-2024, 04:06 PM

Hi all. I have a straight, rust free, POR15'd, 72 Blazer frame that I'd like to sell, but not sure what they are worth. It has the turned down bumper mounts on the rear. Thanks

**hevy_chevy67** · 07-24-2024, 04:42 PM

There is a roller frame for sale here in Alberta for $3,500 Canadian with a Dana 44 and 12 bolt. It's been for sale for a few weeks and hasn't moved for reference. Tough sale up here with no tub as they just aren't kicking around to find easily unless you buy a new one.

**jerry moss** · 07-24-2024, 09:37 PM

I sold one with a running small block, turbo 350 and a 205 t-case, dana 44 and a 12 bolt for a grand a couple years ago. it was probably too cheap but i needed it gone quickly. it also had a VIN and clear title, the guy that bought only wanted the VIN and title but i wouldn't sell it that way- it was all or nothing.

**Shock_Me** · 07-25-2024, 03:31 PM

Thanks guys. I should have mentioned the frame is bare with no drivetrain or suspension attached to it. Just a bare straight coated frame.

07-24-2024, 04:06 PM	#1
Shock_Me Senior Member Join Date: May 2005 Location: New Brunswick, Canada Posts: 587	72 Blazer Frame value Hi all. I have a straight, rust free, POR15'd, 72 Blazer frame that I'd like to sell, but not sure what they are worth. It has the turned down bumper mounts on the rear. Thanks

07-24-2024, 04:42 PM	#2
hevy_chevy67 Registered User Join Date: May 2005 Location: Blackfalds, Alberta Posts: 593	Re: 72 Blazer Frame value There is a roller frame for sale here in Alberta for $3,500 Canadian with a Dana 44 and 12 bolt. It's been for sale for a few weeks and hasn't moved for reference. Tough sale up here with no tub as they just aren't kicking around to find easily unless you buy a new one. __________________ 1971 Chevrolet K10 - SWB, 5.3LS, 4L60e 1970 Chevrolet K5 Blazer - Project 1969 Chevrolet C10 - SWB, 350 Holley Sniper, 700r4 1969 GMC Suburban - 5.3 LS, 4L60e

07-24-2024, 09:37 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: 72 Blazer Frame value I sold one with a running small block, turbo 350 and a 205 t-case, dana 44 and a 12 bolt for a grand a couple years ago. it was probably too cheap but i needed it gone quickly. it also had a VIN and clear title, the guy that bought only wanted the VIN and title but i wouldn't sell it that way- it was all or nothing. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-25-2024, 03:31 PM	#4
Shock_Me Senior Member Join Date: May 2005 Location: New Brunswick, Canada Posts: 587	Re: 72 Blazer Frame value Thanks guys. I should have mentioned the frame is bare with no drivetrain or suspension attached to it. Just a bare straight coated frame.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.