KS Bed Floor Patch Material

[Ironhorse]

Original bed floor material from a truck I parted some time back. No ribs or bed stiffeners, flat panel sections. No curved, corner or bed end edge sections. No rust or flaking or dented sections, normal topside paint wear and flaking. Best shipped via USPS Flat Rate Priority boxes, if it fits, it ships. Can ship several stacked pieces in one box for one initial shipping cost. Money order payment, do not have Paypal

One section 6'' x 23'' $15 plus shipping

One large section 20'' x 50'' Can cut pieces to your size requirements.

Figure a 12'' x 12'' section at $15 plus shipping. Larger sizes priced accordingly to size required.

[Dan-K]

I will take two of the 6 x 23 sections .

[Ironhorse]

Originally Posted by Dan-K

I will take two of the 6 x 23 sections .

Dan-K, do you want the single piece shown in the pic which has a brace under the floor and another of same size or two single pieces 6 x 23 with no brace material, just the bed floor material itself? Can cut a couple pieces 6 x 23 with no bracing at all, just flat bed floor metal for patches. Let me know your preference, thanks for the interest.

[Ironhorse]

Dan, two 6'' x 23'' sections cut and boxed. PM sent with total to your door and payment info. Thanks for the purchase.

More original bed floor material still available for patching as needed.

[ESC]

I’ll take a 12’’x12’’ section, send me amount

[Ironhorse]

Originally Posted by ESC

I’ll take a 12’’x12’’ section, send me amount

Can get a 12'' x 12'' section cut but will need a zip code to figure a total money order amount with the shipping included. Thanks for the interest, let me know your zip and I will get it cut and figured for shipment.

[Ironhorse]

Originally Posted by Dan-K

I will take two of the 6 x 23 sections .

Dan, payment received and shipped the two bed floor patch sections this morning. PM sent with tracking info numbers. Thanks again for the purchase.

ESC: need a zip code to figure shipping total for a 12'' x 12'' bed floor patch.



Still have bed floor patch material left for bed floor repairs. $15 for 12'' x 12'' plus shipping. Larger pieces are available also.

[ESC]

91911

[Ironhorse]

Originally Posted by ESC

91911

Chula Vista, Cal. Got it, thanks. Will get the patch cut and get a total to your door with shipping included. Thanks for the interest.

Floor patch is cut and sending a PM with money order total to your door and payment info. Thanks for the purchase.

[Ironhorse]

ESC, payment received and shipped the bed floor patch this morning. PM sent with tracking info. Thanks again for the purchase,

[ESC]

Thank you!

[Ironhorse]

Still have original bed floor material available for patches and repairs. $15 plus shipping for a 12'' x 12'' section. Larger pieces available with size equivalent cost. Money order payment, do not have Paypal.

[MyLow67]

If you have a 12”x12” left I need one. My zip is 75002 if you do?

[Ironhorse]

Yes still have original bed floor patch material left. Give me a day or two to get a section cut, boxed and get a shipping quote to you.

Can do more 12 x 12 patches or larger if anyone else needs floor patches.

[Ironhorse]

MyLow67, Have the 12'' x 12'' floor patch section cut and boxed. PM sent with shipping total.

Have more original GM floor material for cuts if anyone else has a need.

[Ironhorse]

MyLow67, have your 12'' x 12'' section cut, boxed and addressed to ship.

Still have additional patch sections available if anyone needs original GM patch sections.

[Fbks_Cruiser]

I’d like a 12x12 or whatever you can fit in a large flat rate box. shipped to 99701.

[Ironhorse]

Originally Posted by Fbks_Cruiser

I’d like a 12x12 or whatever you can fit in a large flat rate box. shipped to 99701.

Matt, will get a 12'' x 12'' piece cut later today and get back to you with a total to Fairbanks, Alaska 99701 zip shipped large flat rate USPS.

[Ironhorse]

Matt, was able to get the 12'' x 12'' section cut in between our rain showers today. PM sent with info, thanks.

[Ironhorse]

Matt, payment received this morning and the 12'' x 12'' floor patch section shipped this afternoon. PM sent with tracking info, thanks again for the purchase.

More original GM floor patch material available with various sizes possible.

[Ironhorse]

MyLow67, payment received and will ship the floor patch out Monday, 5/19. Will PM with tracking and scheduled arrival date., thanks for the purchase.

Have more floor bed patch material available if needed by others.

[Fbks_Cruiser]

Patch panel received. Looks great. Thanks.

[Ironhorse]

Matt, thanks for letting me know the floor patch arrived and your pleased with it. Thanks again for the purchase.

Still have some material left if anyone has a need.

[Ironhorse]

MyLow67, patch panel shipped this morning, PM sent with tracking info. Thanks again for the purchase.

[Ironhorse]

Back up to the top, still have some original GM floor material left for patching. 12'' x 12'' section $15 plus shipping. Larger sections possible and priced each accordingly to size requirements. Money order payment, do not have Paypal