![]() |
![]() |
#1 |
Try spinnin 4 rear tars
Join Date: Sep 2003
Location: Salt Lake City, Utah
Posts: 757
|
Hazard flasher switch
Mine has broken off.
Do I order a new switch knob (LMC $4), or do I have to get a complete switch?! Truck is a '70 w/o tilt (if it makes a difference. Thanks all
__________________
SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
I have always just replaced the whole switch. I have not tried replacing just the red button and I did not know they were available.
Jim |
![]() |
![]() |
![]() |
#3 |
Try spinnin 4 rear tars
Join Date: Sep 2003
Location: Salt Lake City, Utah
Posts: 757
|
Ok, where in the world are you getting a switch from? I can't find one anywhere (catalogs/parts store).
![]()
__________________
SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB |
![]() |
![]() |
![]() |
#4 |
Try spinnin 4 rear tars
Join Date: Sep 2003
Location: Salt Lake City, Utah
Posts: 757
|
ttt
![]()
__________________
SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB |
![]() |
![]() |
![]() |
#5 |
Cause the Chicks DIG IT!!
Join Date: Nov 2003
Location: Beaufort SC
Posts: 509
|
some of these older switches you cannot replace just the 4 way switch you have to replace the hole thing. I got mine from autozone and they had to order it. I'd order it from LMC cause if you go to the store and buy it the newer plugs don't match the old horseshoe type. You'll need an adapter and the only place i found one is lmc and they don't sell the adapter seperately. so you might as well buy the switch from them in the first place
|
![]() |
![]() |
![]() |
#6 |
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
I bought one from LMC for $30.....works great
![]()
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
sorry to hijack the thread, but what is the correct shape of the hazard pull thing? I have a '72 non tilt and mine is a simple red piece that you push in (on) and pull out (off). I have seen them with round button types. Which is the right one??
thanks
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
When I said "whole switch" I meant the whole turn signal switch.
I got the last one that I needed from Tim Christian but I am sure others have them. Jim |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Nov 2002
Location: Mt. Vernon, WA..
Posts: 2,322
|
turn signal switch
like this.......$15 and I'll send it to ya. 67sss has attached this image: |
![]() |
![]() |
![]() |
#10 |
Registered User
![]() Join Date: Nov 2002
Location: Mt. Vernon, WA..
Posts: 2,322
|
oops here's the pic
|
![]() |
![]() |
![]() |
#11 | |
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
Quote:
![]()
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg |
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2003
Location: Cypress, Tx
Posts: 4,005
|
Thanks Yellow72custom. Mine looks exactly like the one in the pic above.
__________________
1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2003
Location: missouri city, tx
Posts: 4,486
|
a little off topic. but where can you get that half circle thing on the end where the little wire clips go through? im converting from non tilt to tilt. can i use the old one? do i need a new one?
im putting in a new turn signal switch.
__________________
70 longbed 496/th400/Ford 9" |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jan 2004
Posts: 24
|
Speaking of these red Hazard buttons, does anyone know how to get these turn signal switches (the whole unit) off without breaking the hazard button? I don't want to break mine, but I can't get any further into my steering wheel without removing it.
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2004
Posts: 24
|
bump
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|