72 GMC Grill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dregs454 · 01-31-2004, 12:02 AM

Was it only the 72 GMC grill that had the black paint? I need to get a new grill or rechrome my existing 72 GMC one. I really like the "full chrome look" and I don't really want the black paint. Do you guys think it would look ok if I rechrome right over where the black paint is supposed to be? or would that look tacky? would it be better to just get an earlier GMC grill?? help me out! thanks

Sweet72 · 01-31-2004, 12:16 AM

I had my 72 GMC grill rechomed and plan to leave it all chrome. I think it looks sharp that way, unless you plan on a show truck. Now that the repro 72 grills are available, don't bother to have it rechromed. It's not cost effective.
-Sam

Longhorn Man · 01-31-2004, 01:34 AM

the 71 and 72 is as you describe...I personally prefer the 68 - 70...but the 71/72 DO look better without the black paint.

dregs454 · 01-31-2004, 02:09 AM

Good, I do have some options, the black paint just takes away from the front end. I don't know how much the grill pieces cost down in the states, but up here they seem pretty damn expensive, I maybe rechroming would be cheaper with prices like:

new grill (new)- 510 usd
Top bar (rechromed exchange) - 190 usd
2 new headlight bezels - 115 usd

ouch... thats one expensive nose job...

gonebad2 · 01-31-2004, 03:33 AM

Personal preferance I guess. I have a '67 GMC grill that has the GMC stamp on it. It's going to the chrome shop next week for a shiny new chrome job. Personally, I like the all chrome look. Especially on 67's and 68's since they don't have the chrome header bar and chrome side trim. I have heard some people don't like the GMC that is stamped in the '67 grill but, I kind of like it that way.

dregs454 · 01-31-2004, 04:09 AM

I love the stamped GMC on 67 grills, would I be able to buy new 67 stuff and bolt it on to my 72? prob not hey

gonebad2 · 01-31-2004, 04:19 AM

Quote:

Originally posted by dregs454
I love the stamped GMC on 67 grills, would I be able to buy new 67 stuff and bolt it on to my 72? prob not hey

I have seen people do it. I think all of the dimensions are the same. You might have to drill a few holes to mount the chrome header bar.

tom hand · 01-31-2004, 06:31 AM

I had my 72 grill rechromed and left off the black paint...looks fine. Unless the person looking is a truck nut off this board, they won't know the difference

Longhorn Man · 01-31-2004, 09:21 AM

Quote:

Originally posted by dregs454
I love the stamped GMC on 67 grills, would I be able to buy new 67 stuff and bolt it on to my 72? prob not hey

You would be needing a 67/68 chevy/GMC hood to do this. Other than that, just remove you grill and 'eyebrow' pieces and instell your new 67 grill.
Hold onto your parts if they are in good shape. They still fetch a good price.

dinnut · 01-31-2004, 03:38 PM

http://www.truckandcarshop.com/truckshopsale.htm

gmc grills are 350!

kens71gmc · 01-31-2004, 08:15 PM

i plan to go back all chrome. i am told that there are some vendors out there that can get you an all chrome grill, i'm still looking. also i'm told that you can use lacquer thinner to remove that black trim paint, that sort of scares me but can anybody else out there shed some light on that idea. wouldn't that screw up that chrome surface? good luck and keep us posted.

dregs454 · 01-31-2004, 10:25 PM

quite a bit of the black paint on my grill has worn off already, but the rest of the grill is just looking tired, some rusty spots too. So if the 67-68 grills won't work because of the hood angle, would 69-70 grills bolt right on to my 72??

Daves72'GMC · 01-31-2004, 11:33 PM

My '72 grill is being rechromed now. The first time They didn't do a very good job so they are doing it again. I'll let you all know how it came out. I told him if it wasn't perfect this time then I wanted my check back.I'm also having the rear bumper bezels eyebrows all done for $900. Good price but we'll see if they can do quality work.

Longhorn Man · 02-01-2004, 02:22 AM

69/70 will bolt right onto your 72, yes.

01-31-2004, 12:02 AM	#1
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	72 GMC Grill Was it only the 72 GMC grill that had the black paint? I need to get a new grill or rechrome my existing 72 GMC one. I really like the "full chrome look" and I don't really want the black paint. Do you guys think it would look ok if I rechrome right over where the black paint is supposed to be? or would that look tacky? would it be better to just get an earlier GMC grill?? help me out! thanks __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

01-31-2004, 12:16 AM	#2
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	I had my 72 GMC grill rechomed and plan to leave it all chrome. I think it looks sharp that way, unless you plan on a show truck. Now that the repro 72 grills are available, don't bother to have it rechromed. It's not cost effective. -Sam __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. Last edited by Sweet72; 01-31-2004 at 12:53 AM.

01-31-2004, 02:09 AM	#4
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	Good, I do have some options, the black paint just takes away from the front end. I don't know how much the grill pieces cost down in the states, but up here they seem pretty damn expensive, I maybe rechroming would be cheaper with prices like: new grill (new)- 510 usd Top bar (rechromed exchange) - 190 usd 2 new headlight bezels - 115 usd ouch... thats one expensive nose job... __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

01-31-2004, 03:33 AM	#5
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	Personal preferance I guess. I have a '67 GMC grill that has the GMC stamp on it. It's going to the chrome shop next week for a shiny new chrome job. Personally, I like the all chrome look. Especially on 67's and 68's since they don't have the chrome header bar and chrome side trim. I have heard some people don't like the GMC that is stamped in the '67 grill but, I kind of like it that way. __________________ Your Bought And Sold....I Got Your Soul!

01-31-2004, 04:09 AM	#6
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	I love the stamped GMC on 67 grills, would I be able to buy new 67 stuff and bolt it on to my 72? prob not hey __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

01-31-2004, 01:34 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	the 71 and 72 is as you describe...I personally prefer the 68 - 70...but the 71/72 DO look better without the black paint.

01-31-2004, 06:31 AM	#8
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	I had my 72 grill rechromed and left off the black paint...looks fine. Unless the person looking is a truck nut off this board, they won't know the difference Attached Images __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

01-31-2004, 03:38 PM	#10
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	http://www.truckandcarshop.com/truckshopsale.htm gmc grills are 350! __________________ 70 longbed 496/th400/Ford 9"

01-31-2004, 08:15 PM	#11
kens71gmc Registered User Join Date: Dec 2003 Location: Miamisburg, Ohio Posts: 20	go all chrome! i plan to go back all chrome. i am told that there are some vendors out there that can get you an all chrome grill, i'm still looking. also i'm told that you can use lacquer thinner to remove that black trim paint, that sort of scares me but can anybody else out there shed some light on that idea. wouldn't that screw up that chrome surface? good luck and keep us posted. __________________ I have been working on 71 GMC 1/2 ton, lwb. frame off resto. 383 sb/350 turbo, dynomax ceramic headers, Flowmaster 50's, summit HEI, JET tuned Q-jet, BE COOL radiator, soon to be installled Vintage Air, tank in frame, painless wiring (love it but a couple minor problems), 2 1/2 in. drop front, 3 in. drop rear. THAT ENGINE IS NOW BORN AND HOWLING LOUDLY!

01-31-2004, 10:25 PM	#12
dregs454 Killin' Time Join Date: Jul 2002 Location: Calgary, Alberta Posts: 221	quite a bit of the black paint on my grill has worn off already, but the rest of the grill is just looking tired, some rusty spots too. So if the 67-68 grills won't work because of the hood angle, would 69-70 grills bolt right on to my 72?? __________________ NEED CORVETTE 1972 GMC C20 350, SM465, HEI Dynomax headers and 2.5" duals

01-31-2004, 11:33 PM	#13
Daves72'GMC Registered User Join Date: Mar 2003 Location: Asheville, N.C Posts: 952	My '72 grill is being rechromed now. The first time They didn't do a very good job so they are doing it again. I'll let you all know how it came out. I told him if it wasn't perfect this time then I wanted my check back.I'm also having the rear bumper bezels eyebrows all done for $900. Good price but we'll see if they can do quality work.

02-01-2004, 02:22 AM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	69/70 will bolt right onto your 72, yes.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.