Hey Dean - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JIMs70GMC** · 02-03-2004, 03:20 PM

Your PMs are full. I left your brother a voice mail. I still want the truck. Think I got the transportation figured out for the 6th of March.

Dean · 02-03-2004, 04:41 PM

I emptied my PMs. Thanks. I guess I need to start deleting them when I read them......

**Canadian694x4** · 02-03-2004, 11:12 PM

Hey Jim...ya buying tha "Beast" from Dean?

**JIMs70GMC** · 02-04-2004, 07:38 AM

Yep! Going to flat tow it from Cincinnati to Chesapeake VA. I found a truck I could rent and tow with.

Dean · 02-04-2004, 09:38 AM

We've always said it would make a good vehicle for the next "Road Warriors" movie. I can almost see Mel Gibson driving it...lol

**JIMs70GMC** · 02-10-2004, 09:06 AM

Your PMs are full again.

I was going to attach the tow bar to the bumper by drilling about 8 1/2 holes and attaching 4 brackets. I'll post a pic this evening.

Dean · 02-10-2004, 10:31 AM

I deleted more stuff from my Inbox. I can't believe that thing is full. It only has three messages on it.

I guess I better take a look at that front bumper and see how the prevous owner mounted it. I'd want to make sure it is secure.

**JIMs70GMC** · 02-10-2004, 10:37 AM

Check your sent box also. Also select a longer time period I had stuff in mine from over a year ago.

If it's not then will it come off? The tow bar I have will fit the frame on our trucks.

**JIMs70GMC** · 02-11-2004, 10:17 PM

Dean, Another twist looks like I'll be bringing a tow dolly which is definetly prefered to flat towing.

Dean · 02-12-2004, 08:55 AM

I like the tow dolly a lot better. You won't have to worry about the bearings or the bumper that way.

**JIMs70GMC** · 02-12-2004, 09:01 AM

Dean, Any update pics of your truck?

02-03-2004, 03:20 PM	#1
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Hey Dean Your PMs are full. I left your brother a voice mail. I still want the truck. Think I got the transportation figured out for the 6th of March. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-03-2004, 11:12 PM	#3
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Hey Jim...ya buying tha "Beast" from Dean? __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

02-04-2004, 07:38 AM	#4
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Yep! Going to flat tow it from Cincinnati to Chesapeake VA. I found a truck I could rent and tow with. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-04-2004, 09:38 AM	#5
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	We've always said it would make a good vehicle for the next "Road Warriors" movie. I can almost see Mel Gibson driving it...lol Attached Images

02-10-2004, 09:06 AM	#6
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Your PMs are full again. I was going to attach the tow bar to the bumper by drilling about 8 1/2 holes and attaching 4 brackets. I'll post a pic this evening. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-03-2004, 04:41 PM	#2
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I emptied my PMs. Thanks. I guess I need to start deleting them when I read them......

02-10-2004, 10:31 AM	#7
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I deleted more stuff from my Inbox. I can't believe that thing is full. It only has three messages on it. I guess I better take a look at that front bumper and see how the prevous owner mounted it. I'd want to make sure it is secure.

02-10-2004, 10:37 AM	#8
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Check your sent box also. Also select a longer time period I had stuff in mine from over a year ago. If it's not then will it come off? The tow bar I have will fit the frame on our trucks. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-11-2004, 10:17 PM	#9
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Dean, Another twist looks like I'll be bringing a tow dolly which is definetly prefered to flat towing. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

02-12-2004, 08:55 AM	#10
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I like the tow dolly a lot better. You won't have to worry about the bearings or the bumper that way.

02-12-2004, 09:01 AM	#11
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Dean, Any update pics of your truck? __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.