The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-04-2004, 12:44 PM   #1
Suicide-D
Registered User
 
Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
H pipe question

I did a search and I still have one question...I noticed that the consensus of opinions is... paint the exhaust and run it awhile to let the paint burn off...and put the h where it stops burning off...how long is "awhile"?

I posted this on the engine and drivetrain and got no response. I tried to delete the post over there but had no permission??
Suicide-D is offline   Reply With Quote
Old 02-04-2004, 12:48 PM   #2
smitty62
Registered User
 
smitty62's Avatar
 
Join Date: May 2002
Location: North Carolina
Posts: 1,234
Couple of hours should do it.....
__________________


Stepsides look like real trucks!
Smitty

smitty62 is offline   Reply With Quote
Old 02-04-2004, 01:05 PM   #3
Suicide-D
Registered User
 
Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
surely you jest? I am not going to run that truck for a couple of hours just for that. I'll just put it 12-14" behind the collector. a couple of hours would cost me $$$ on super unleaded... not to mention fill the shop with carbon monoxide!
Suicide-D is offline   Reply With Quote
Old 02-04-2004, 01:34 PM   #4
kaycee
Registered User
 
kaycee's Avatar
 
Join Date: Jan 2000
Location: Wyoming USA
Posts: 2,449
Talking IT will

balance it self(heat) if u put it where u said 12"-18" behind the collecters.DO it u won't regret it.I don't think his name is Surely
__________________
2001 Silverado K-1500
2005 FXDWG stage3
69 CHEVY Short/Step 327/4L60 373 posi
63 IMPALA 327
kaycee is offline   Reply With Quote
Old 02-04-2004, 01:47 PM   #5
shuttermutt
Don't say "Oops!", Doctor
 
shuttermutt's Avatar
 
Join Date: Nov 2003
Location: Houston, TX
Posts: 677
Re: IT will

Quote:
Originally posted by kaycee
balance it self(heat) if u put it where u said 12"-18" behind the collecters.DO it u won't regret it.I don't think his name is Surely
Wow... I didn't understand a single word of that.
__________________
'Mutt
1968 CST LWB: R.I.P.
1967 Chevelle: TPI 454 beast
1967 C10 SWB: Claimed when Bumpster didn't put it on his list
shuttermutt is offline   Reply With Quote
Old 02-04-2004, 01:51 PM   #6
MITCH1914
Registered User
 
MITCH1914's Avatar
 
Join Date: Mar 2001
Location: indianapolis,indiana,usa
Posts: 506
i read in john lingenfelders book that you can put he h pipe anywhere between the headers and the muffler. i got mine far enough back to that i can drop the tranny without any interferance.

i think the other guy was pulling your leg with the couple of hours reply
MITCH1914 is offline   Reply With Quote
Old 02-04-2004, 01:58 PM   #7
shuttermutt
Don't say "Oops!", Doctor
 
shuttermutt's Avatar
 
Join Date: Nov 2003
Location: Houston, TX
Posts: 677
I've always heard that you should get it up as close to the front of the engine as possible. Of course, for most of us that means trouble for dropping the tranny. I also understand that the position makes a difference on the noise level.

I like the paint idea. I think I'll try it when I have my crossover put in. Maybe I'll call some exhaust shops this afternoon. What have you guys paid for someone to graft a pipe into existing duals?
__________________
'Mutt
1968 CST LWB: R.I.P.
1967 Chevelle: TPI 454 beast
1967 C10 SWB: Claimed when Bumpster didn't put it on his list
shuttermutt is offline   Reply With Quote
Old 02-04-2004, 02:13 PM   #8
Suicide-D
Registered User
 
Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
the flowmaster kit I got was 36.99 out of Jeg's. I ordered it from O'Reilly's got it in 2 days compared to a week or so. it is removable, just cut out 7.5" of pipe in the desired location and comes with clamps. I may weld in the "T" sections and use the clamps on the center section to aid in tranny removal(which I hope doesn't come up soon) but if the exhaust is already dualed it shouldn't be too difficult.
Suicide-D is offline   Reply With Quote
Old 02-04-2004, 08:43 PM   #9
smitty62
Registered User
 
smitty62's Avatar
 
Join Date: May 2002
Location: North Carolina
Posts: 1,234
They're on Ebay for about $15 unless you have to have stainless.
Oh, yeah----------------- you have to run stainless 6 hours before installing the "X"
Attached Images
 
__________________


Stepsides look like real trucks!
Smitty

smitty62 is offline   Reply With Quote
Old 02-04-2004, 11:41 PM   #10
chevydog66
GM ONLY BABY!!!
 
chevydog66's Avatar
 
Join Date: Oct 2003
Location: Fort Wayne, IN.
Posts: 1,998
Are you using a good aluminized pipe, like most good exhaust shops sell? If you are then why paint it? It looks good as is. You can clean the aluminized pipe with steel wool and it looks good for a long time.
__________________
2 wrongs don't make a right, but 3 lefts do.

66 Chevelle Malibu 406ci, 573hp, 10.99@121mph
96 Chevy Silverado Z71
72 GMC 1500 Super Custom LS 6.0/4L65 on airride

http://www.cardomain.com/ride/707879...mc-c-k-pick-up
chevydog66 is offline   Reply With Quote
Old 02-04-2004, 11:45 PM   #11
smitty62
Registered User
 
smitty62's Avatar
 
Join Date: May 2002
Location: North Carolina
Posts: 1,234
Chevydog--the paint is for detecting heat differential--paint burn off-HOT! Paint stay--COOL!!
__________________


Stepsides look like real trucks!
Smitty

smitty62 is offline   Reply With Quote
Old 02-09-2004, 07:19 PM   #12
Suicide-D
Registered User
 
Join Date: Jan 2001
Location: Katy, TX...but the love of my life resides in Dublin,OH.
Posts: 1,408
Thumbs up Man that worked

I was mainly putting in the H-pipe to tame my Spintech Pro Streets... and I have to say it worked. I can't really tell if it added any torque or not...I put this setup in the 70 with 3.08 gears(temporary until next weekend) and the setup was in my 71 with a 4.11 thats a big difference. I will notice a difference when the 3.73's get in there but I doubt I will have any seat of the pants memory by then. I haven't driven the 71 in about 5 months.

But it did change the exhaust tone! and thats what I was after.

I installed it about 19" behind the collector, I couldn't get any closer because of the pipe configuration I had. falls right behind the th400 crossmember.
Suicide-D is offline   Reply With Quote
Old 02-09-2004, 11:13 PM   #13
gr8scott51
Registered User
 
gr8scott51's Avatar
 
Join Date: Mar 2003
Location: Bremerton, WA
Posts: 1,839
is it true?

I went to a local performance muffler shop this afternoon to get an estimate to reroute my pipes a little and install an H pipe. I was told that they'd gladly take my money, but that an H pipe on a small block chevy is redundant as the engine exhaust is internally balanced. Any comments?

scott
__________________
Silence is golden, duct tape is silver. - Scott
gr8scott51 is offline   Reply With Quote
Old 02-09-2004, 11:23 PM   #14
walker
Registered User
 
walker's Avatar
 
Join Date: Jul 2003
Location: north of Phx AZ about 30 miles
Posts: 698
Ooohh Yeah, good catch. It goes through the manifold. Granted the hole is smaller, but it is close to the source.
__________________
Andy,Phx AZ
'67 C-10 (Ahhh, done at last. Well there is that disk front end I want to put in and...)
"23 C-Cab-sold
'48 Ford 8N tractor(still working)
'67 Scout(Now on the road)
'70 MG B.-sold
walker is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:02 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com