307 for sale in Rhode Island also 350 4 bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

86SILVERADO · 02-04-2004, 10:07 PM

I have a good running 69, 307 long block. I pulled it from my dump because it burned too much oil for my liking and I had a new 350 to put in it. When it was out of the truck I looked in the exhuast ports and there was oil pouring down the valve stems. The compression was pretty good and oil in the cylinders did not change it much so I think it just needs a valve job and some seals. Like I said I had a 350 for the dump and with towing my tractor around with a loaded bed I kind of needed it in there. I would keep the 307 but I am moving up to MASS soon and kinda need to lighten the load. $200 or best offer. pickup or dropoff somewhere between SE RI and western MASS.

The 350 should never have been torn down in the first place. I still have the crank, block, rods/pistons, pan intake and heads. All need a good hot tank but you could probably throw in rings and bearings and hone it and be done. Would keep it also but as stated, time to lighten the load. $400 or best

86SILVERADO · 02-05-2004, 11:05 PM

I know there are only like 10 of us in New England but.......TTT

86SILVERADO · 02-07-2004, 08:33 PM

Can't believe how fast posts get buried on this board.

TTT

02-04-2004, 10:07 PM	#1
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	307 for sale in Rhode Island also 350 4 bolt I have a good running 69, 307 long block. I pulled it from my dump because it burned too much oil for my liking and I had a new 350 to put in it. When it was out of the truck I looked in the exhuast ports and there was oil pouring down the valve stems. The compression was pretty good and oil in the cylinders did not change it much so I think it just needs a valve job and some seals. Like I said I had a 350 for the dump and with towing my tractor around with a loaded bed I kind of needed it in there. I would keep the 307 but I am moving up to MASS soon and kinda need to lighten the load. $200 or best offer. pickup or dropoff somewhere between SE RI and western MASS. The 350 should never have been torn down in the first place. I still have the crank, block, rods/pistons, pan intake and heads. All need a good hot tank but you could probably throw in rings and bearings and hone it and be done. Would keep it also but as stated, time to lighten the load. $400 or best __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!

02-05-2004, 11:05 PM	#2
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	I know there are only like 10 of us in New England but.......TTT __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!

02-07-2004, 08:33 PM	#3
86SILVERADO Registered User Join Date: Dec 2002 Location: Hills of Western Mass Posts: 626	Can't believe how fast posts get buried on this board. TTT __________________ 86 Silverado C10 back to 305 power! 67 C30 Dually Dump, with 350 transplant, Rockhauler 05 Duramax 3500 "If at first you don't succeed, try a bigger hammer" Member of the 1-Ton club!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.