Parting Out 71 Chevy LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64duece · 02-06-2004, 01:33 AM

Here's what I've got

See the pics here

http://www.geocities.com/64duece/71chevy.html

Rust free Non A/C cab and doors New front and rear window seals, weatherstripping. All glass is there but, not installed. The restored doors will include new regulators, powdercoated internal door hardware, door handles and mirrors and felts $1700

New L/R Fenders Repo w/ powdercoated hinges - $200

Good Hood - $75

Rad support $75

New L/R Inner Fenders - $150

New Front bumper - $100

Front suspension includes new disc brake rotors, calipers and hardware. All new parts: Wheel bearings, Inner/Outer tie rods, sleeves, upper/lower balljoints, springs, shocks, pitman arm, power steering box - $500

New swingarms, springs and shocks - $400

Stock rear axle w/ new brakes and e-brake cables $150

new wheel tubs - $75

B+M Megashifter for Truck - $100

Complete chassis w/ brake lines once cleared of the parts above $250

Located in NJ. Please...no tire kickers.

03glide · 02-06-2004, 10:35 AM

How about the rims and tires in the pictures?

64duece · 02-06-2004, 10:49 AM

http://67-72chevytrucks.com/vboard/s...threadid=89114

03glide · 02-06-2004, 10:53 AM

Saw that one a couple minutes later. Thanks

spencra · 02-06-2004, 12:10 PM

Interested in trades?

71Rat · 02-06-2004, 12:46 PM

were in nj are you located and would you be willing to sell the bed? or how much would you want for the truck the way it is?

Thanks
Rat

Blue Beard · 02-06-2004, 04:20 PM

Wish you were closer, to far to ship

64duece · 02-24-2004, 12:39 AM

Back from a nice vacation!!! (Too damn cold here though!)

I'd like to sell it complete but, make an offer and we'll see. The bed isn't in the best of shape. We hadn't even begun working on it.

Make offers on these parts...I could use the room!!!

64duece · 02-25-2004, 10:06 AM

I'll take $2500 for everything.

71Rat · 02-25-2004, 10:31 AM

god i wish i had $2500 right now...... how much would you want for the bed? and in the first post it said you were in NJ,what county in nj are you located in?

Thanks
Rat

64duece · 02-25-2004, 10:42 AM

The bed needs abit of work. You might find a better one elsewhere. BTW, Gloucester County

ljbear · 02-25-2004, 01:42 PM

Are the inner fenders GM or aftermarket?

71Rat · 02-25-2004, 08:05 PM

what type of work does the bed need and how much would you want for it?

Thanks
Rat

64duece · 02-25-2004, 11:28 PM

Inners are GM sheetmetal.

Bed has decent sized dent on passenger side. Some rust here and there...not rotted. Includes new wheelhousings. $200

71on20s · 02-25-2004, 11:41 PM

the radiator support do u still have it is it new and how much

dinnut · 02-26-2004, 12:28 AM

interested to see pics of floorshifter. would it work for a th350?

peppi · 02-28-2004, 04:53 PM

Dennis what do you have left for sale?

02-06-2004, 01:33 AM	#1
64duece Registered User Join Date: Dec 2003 Posts: 12	Parting Out 71 Chevy LWB Here's what I've got See the pics here http://www.geocities.com/64duece/71chevy.html Rust free Non A/C cab and doors New front and rear window seals, weatherstripping. All glass is there but, not installed. The restored doors will include new regulators, powdercoated internal door hardware, door handles and mirrors and felts $1700 New L/R Fenders Repo w/ powdercoated hinges - $200 Good Hood - $75 Rad support $75 New L/R Inner Fenders - $150 New Front bumper - $100 Front suspension includes new disc brake rotors, calipers and hardware. All new parts: Wheel bearings, Inner/Outer tie rods, sleeves, upper/lower balljoints, springs, shocks, pitman arm, power steering box - $500 New swingarms, springs and shocks - $400 Stock rear axle w/ new brakes and e-brake cables $150 new wheel tubs - $75 B+M Megashifter for Truck - $100 Complete chassis w/ brake lines once cleared of the parts above $250 Located in NJ. Please...no tire kickers. __________________ Dennis

02-06-2004, 10:49 AM	#3
64duece Registered User Join Date: Dec 2003 Posts: 12	http://67-72chevytrucks.com/vboard/s...threadid=89114 __________________ Dennis

02-06-2004, 12:10 PM	#5
spencra This, is my BOOMSTICK! Join Date: Oct 2003 Location: Berlin, CT Posts: 1,310	Interested in trades? __________________ Larry Got rid of my projects for now. 1980 Jeep CJ7 1998 Nissan Sentra (my car) 2001 Toyota Sienna (wife's, of course)

02-06-2004, 12:46 PM	#6
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	were in nj are you located and would you be willing to sell the bed? or how much would you want for the truck the way it is? Thanks Rat __________________ Modify everything, leave nothing alone!~

02-06-2004, 04:20 PM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Wish you were closer, to far to ship __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-06-2004, 10:35 AM	#2
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	How about the rims and tires in the pictures?

02-06-2004, 10:53 AM	#4
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 630	Saw that one a couple minutes later. Thanks

02-24-2004, 12:39 AM	#8
64duece Registered User Join Date: Dec 2003 Posts: 12	Back from a nice vacation!!! (Too damn cold here though!) I'd like to sell it complete but, make an offer and we'll see. The bed isn't in the best of shape. We hadn't even begun working on it. Make offers on these parts...I could use the room!!! __________________ Dennis

02-25-2004, 10:06 AM	#9
64duece Registered User Join Date: Dec 2003 Posts: 12	I'll take $2500 for everything. __________________ Dennis

02-25-2004, 10:31 AM	#10
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	god i wish i had $2500 right now...... how much would you want for the bed? and in the first post it said you were in NJ,what county in nj are you located in? Thanks Rat __________________ Modify everything, leave nothing alone!~

02-25-2004, 10:42 AM	#11
64duece Registered User Join Date: Dec 2003 Posts: 12	The bed needs abit of work. You might find a better one elsewhere. BTW, Gloucester County __________________ Dennis

02-25-2004, 01:42 PM	#12
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	Inner Fenders Are the inner fenders GM or aftermarket? __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

02-25-2004, 08:05 PM	#13
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	what type of work does the bed need and how much would you want for it? Thanks Rat __________________ Modify everything, leave nothing alone!~

02-25-2004, 11:28 PM	#14
64duece Registered User Join Date: Dec 2003 Posts: 12	Inners are GM sheetmetal. Bed has decent sized dent on passenger side. Some rust here and there...not rotted. Includes new wheelhousings. $200 __________________ Dennis

02-25-2004, 11:41 PM	#15
71on20s Registered User Join Date: Jan 2004 Location: Houston, TX Posts: 52	radiator support the radiator support do u still have it is it new and how much



Register or Log In To remove these advertisements.

02-26-2004, 12:28 AM	#16
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	interested to see pics of floorshifter. would it work for a th350? __________________ 70 longbed 496/th400/Ford 9"

02-28-2004, 04:53 PM	#17
peppi Registered User Join Date: Jul 2003 Location: JERSEY Posts: 57	Dennis what do you have left for sale? __________________ 1968 C-10 Money PIT......

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.